Form Control in Power Apps | Must know features & properties

[@saeedsm57]

Hey Reza, your channel has become the most reliable and comprehensive resource for Power Platform learners, You rock! (Damet garm, eyval dari!)

[@RezaDorrani]

Thank You 🙏

[@william2053]

I didn’t know about Form.LastSubmit function.... I was using this method to get the last item ID, and to use Patch function to update it afterwards. Set(varItemID, Last(DataSource.ID)); Thanks again for showing us another enlightening video Reza!!!

[@RezaDorrani]

You're most welcome!

[@techtalksabhishek]

I literally struggled to change properties of individual controls in each datacard. Didn't knew this trick back 2 years when I was working on PowerApps. Keep up the good Job.

[@RezaDorrani]

Thanks

[@robofski]

I have learnt so much about Power Automate watching your videos and as I start exploring Power Apps your content is proving to be just as brilliant! Thank you for your work Reza.

[@RezaDorrani]

Thank You Dan

[@dandrem.4074]

Bless you! I was struggling and couldn't function until I figured this Edit Reset business out. Thank you so much.

[@RezaDorrani]

Most welcome

[@TinaDerby01]

I love how this shows all the controls and properties in a really clear and easy to understand way. Thank you!!!

[@RezaDorrani]

Glad to hear that! Thanks so much for watching.

[@WaliSayed]

One of the interesting features of your tutorials is the attractive form designs you use, which makes the lessons incredibly useful. I personally use some of your designs in my work environment. Thanks a million!

[@RezaDorrani]

Thank you very much!

[@davidrico8755]

Found it its in min 20. Exactly what i needed. So i can essentially take out a the form viewer and just use the edit form for viewing and edit. awesome!!

[@RezaDorrani]

Great!

[@GlibPronskikh]

Bulk update of Datacards and other elements with minimum effort - AMAZING!!! Great video thank you. :)

[@RezaDorrani]

Glad you liked it!

[@rikkilleen3169]

YOU'RE DOING IT AGAIN! Releasing new content at the same time I'm researching the topic! Stay outta my head! Are you with the government!

[@RezaDorrani]

I read minds :)

[@loofdenrael6205]

Seriously! I have been struggling to get started this past week, so it's good fortune that I waited for this to come out yesterday!! Thanks Reza!

[@RezaDorrani]

@@loofdenrael6205 You most welcome! I will be focusing on more videos for beginners going forward. Will try and maintain a balance between 100 and 200 level videos.

[@tmtenn9712]

Thanks Reza. By far one of the best succinct introduction to forms/controls I have seen. Wish this video had been available six months ago when I embarked upon PowerApps journey. Would have saved me hours and hours of struggling to make my forms work the way I wanted to. Thanks again and looking forward to more videos like this. 👍👍

[@RezaDorrani]

You are most welcome and thanks for the amazing feedback

[@LogicalAmmar]

What a brilliant tutor you are!! A simple topic with hundreds of things to learn.

[@RezaDorrani]

Many thanks!

[@MauricioPiloPais]

The clearest tutorial on PowerApps.. thanks!!!! (For german speakers: a comma(,) is semicolon(;) and a semicolon(;) is a double semicolon(;;)

[@RezaDorrani]

Thank You and the tip is spot on!

[@TheKermit2110]

you are my God, Reza - so generous. Perfect delivery, pacing, insight, professionalism, technical knowledge and balance of detail with video length. Cant praise you highly enough! ba tashakkor basyar

[@RezaDorrani]

Thank You for your kind words.

[@ezequielcavalheiro4598]

Morning Reza, I pretty much never comment on internet, but you really helped me a lot on various topic. So thank you a lot for the huge work, every time it's clear and precise, keep it up like that ! Wish you all the best.

[@RezaDorrani]

Thank You so much! Il try my best to keep up the content quality.

[@mansitrivedi8223]

Hi Reza, I have watched most of your videos on Power Platform and appreciate your way of explanation and minutely covering the ABC's of Power Apps. You Really rock !! Thanks once again.

[@RezaDorrani]

Thank You so much Mansi

[@Chgrtours]

Thanks for sharing your knowledge! Best PowerApps teacher ever! Merci Reza 🇫🇷

[@RezaDorrani]

Wow, thank you!

[@mardeeepp108]

Whatever you do , this has helped a lot of people and touched a lot of technical lives. For a novice like me , you are nothing less than a guru, so thank you.

[@RezaDorrani]

🙏

[@affialho1]

Reza - you're my hero when it comes to PowerApps! Appreciate all the great and detailed videos! Thank you!

[@RezaDorrani]

Thanks so much for watching and liking the videos.

[@nataliatsvetkov9977]

OMG! The best video ever! Thank you Reza! I learned in these 30 minutes more than in the past year by randomly pocking around. So many cool tricks!

[@RezaDorrani]

Awesome! Now no more poking around 😊

[@nataliatsvetkov9977]

@@RezaDorrani I subscribed to your channel, and I think once I watch all your 126 videos, I will become a master!

[@havaljamal9952]

Its lucky to have your videos from my second day involved in power app

[@RezaDorrani]

Wish you all the best in your new journey. I hope the channel has a lot to offer in terms of content.

[@Liam-fb4tu]

Hey Reza, I just wanted to say thank you so much for the quality and detail of all of your videos. They are incredibly helpful and for newcomers to power apps it makes learning the process so much easier, I watch the videos back and forth a few times so I get a good understanding of what you are doing. This video alone solved so many of the questions that I asked myself ‘how do I do that’. Keep the great content coming! Looking forward to hopefully seeing some more videos on inter-grating flows into some apps 👍

[@RezaDorrani]

Thank You so much Liam. The feedback is much appreciated. I will keep trying my best to provide quality content. Integrating flows into Apps, check kzbin.info/aero/PLTyFh-qDKAiE8Cl15mz1wMNz2nUbgXFGU

[@patricia294]

Hi, Reza. This video is gold. I learned a lot in 30 minutes about basic stuff I really needed. If you could create a tutorial with more details about control positioning it'd be awsome!! This is now the thing I hate the most in PowerApps. I wish I could find a way to "freeze" their position because it's annoying to adjust it as it's not possible to just to drag and drop. I'm trying relative positioning, but still doesn't bring the outcome I expected. Thanks very much!!

[@RezaDorrani]

I make videos when I get multiple requests on a particular topic. Every quarter I ask subscribers for topic suggestions on the Community Tab of my KZbin channel. Subscribers vote for topics and the highest voted topics get added to my backlog. Make sure you post this in the next topic suggestion post. If it gets a lot of votes, I will add it to my backlog.

[@brucealtner4529]

@@RezaDorrani I agree with Patricia about hating the positioning of form controls and would also look forward to seeing a video with more information about that. But, meanwhile, I am not able to drag and drop the data cards on my form as you do in this video, even with "Snap to Columns" turned off. They just won't move. It's also very challenging to position them using their X, Y, Width, and Height properties. It's a real struggle to have to add a new field column to an existing form. You make it look easy but that's not my experience.

[@lukebrunning4725]

Reza, you're the MVP's MVP.

[@RezaDorrani]

Hey, Thanks Luke. I’m no longer an MVP though :) as I have joined the mothership

[@munisamy8770]

Thank you so much Raza, I am learning PowerApps through your Videos. You are explanation is too clear to understand and execute.

[@RezaDorrani]

Glad to hear that

[@ybansan3270]

Hello Reza, thank you for your channel. For me, your videos are the best for learning the Power Platform. As moreover I am not of English mother tongue, but French, your English is easier to understand for me than that of an English mother tongue speaker.😄

[@RezaDorrani]

Thank You so much!

[@pimpandoer72]

Hello Reza, Thank you very much for your video's. This video about form controls is I think one of the best because it covers most of the things you will encounter when building a form. For me the message that pops up when the form is changed but not saved was really nice to learn. When you have multiple tabs, you can loose sight quickly about the changes. Please continue! All the best!

[@RezaDorrani]

So happy to hear the feedback! Thank You so much Dave.

[@fadiahdab]

Thank you Reza, I have updated my info regarding forms, and added two news things which are the validation and unsaved property

[@RezaDorrani]

👍

[@mustafahussainmohsin320]

Bravo! Bravo! Bravo!.. The video which I was waiting for overview of Form control and I solved my some of the confusions. Thanks

[@RezaDorrani]

Thanks Mustafa. So happy to hear the video is useful.

[@chrisundery6132]

Reza, you are an absolute legend and my go to for anything power apps. Thank you 🎉

[@RezaDorrani]

Thanks Chris

So much useful information about Form Ctrl, no doubts that the attachment ctrl was not covered explicitly in this video, but who follows Reza's YT channel know everything was already there in previous videos. Well summarized and clearly explained as always. 🙏🏻

[@RezaDorrani]

Thank You so much!

[@premsai9908]

you explored this form control in such a way that you developed this component on your own

[@RezaDorrani]

Thanks

[@ItsMeProday83]

Well done Reza, it is always a pleasure to watch your videos. As a beginner I always learn a ton of new stuffs.

[@RezaDorrani]

Awesome! Thanks so much for watching and learning.

[@mattparker9366]

I love how you present these topics! Keep it up!

[@RezaDorrani]

Thanks Matt

[@yjamous]

Your videos always tackle good topics that are great to know. Your gradual approach of explaining the topic is amazing. Keep the good work.

[@RezaDorrani]

Thanks so much for the awesome feedback

[@neilwilgus6995]

Another GREAT video Reza! Your videos are an incredible resource for learning the Power Platform, thank you for your contribution!

[@RezaDorrani]

Much appreciated!

[@krisihari]

Amazing video! The content, organisation of the material, quality. Thank you so much for taking the time to release such material!

[@RezaDorrani]

Much appreciated!

[@benyamadugna]

Thank you so much Reza, I learn more every day on your channel

[@RezaDorrani]

Happy to hear that!

[@kevinjoseph9023]

I continue to learn from your videos. Thanks mate

[@RezaDorrani]

Glad to hear it

[@Bapfrancis]

Hey Reza, thank you very much for this tutorial. It was well presented and I was able to create a solution that I needed by following your tutorial including some pretty cool features. Much appreciated!!

[@RezaDorrani]

Great to hear! Thanks for watching

[@juanjavierguampe8184]

Reza, thank you for another valuable video tutorial. Only a person who understands something very well can teach it easily as you do.

[@RezaDorrani]

You are most welcome and Thank You for watching and liking the video.

[@jimfitch]

Excellent, Reza! As always. Thank you!

[@RezaDorrani]

Most welcome! Thanks for watching.

[@divyashree4558]

Hey Reza, your channel has become the most reliable resource for Power Platform learners, especially beginners like us. You rock! I have doubt regarding system generated created by field it populates with my name in a list instead of the logged in user, though power app works properly this list alone creates issue like this which creates confusion in records.

[@RezaDorrani]

When an item is created via power app, created by will always be the user running the app.

[@maryampour8914]

Amazing! Thank you so much Reza for another wonderful tutorial

[@RezaDorrani]

My pleasure!

[@myatix1]

Hi Reza, This is a great tutorial on how to use forms. Keep up the great work!

[@RezaDorrani]

Thanks Alan

[@shannonmora7282]

Hi Rez, By far, your channel has been the most helpful to me in my journey to build amazing apps. Thanks! I have looked online and cannot find keystrokes to multi-select datacards using a mac. Any tips?

[@RezaDorrani]

Thank You so much. Oh! I have never used a mac :) No idea about this one.

[@ashokpershad]

Thanks Rezza, some of the tricks are really awesome and huge time savers. I never miss your videos whatever the case may be. Thanks for making such wonderful videos...

[@RezaDorrani]

Thanks Ashok

[@lalosangron]

Thanks a lot for recommending this video now I know everything that I was doing wrong with my forms, see you on the image control video :)

[@RezaDorrani]

Glad to hear that!

[@oricchannel2811]

Very useful video, Reza. Thanks for sharing. Won my like, as always.

[@RezaDorrani]

Thanks so much

[@storiesreadaloudforkids2224]

thank you for this video, many of the steps outlines are very helpful

[@RezaDorrani]

Most welcome

[@drhoads9]

Thank you, Reza - this video was an immense help to this novice :)

[@RezaDorrani]

Glad to hear!

[@dougydoe]

Another Excellent piece and a good refresher course on the Form Control. I always look forward to learning something new from you videos.😎

[@RezaDorrani]

Great to hear! Your most welcome and thank you for watching.

[@TheMrWARLORD]

Amazing, thanks alot for these quick tips man!

[@RezaDorrani]

You are most welcome. Thanks for watching.

[@cztop54]

GREAT, Great for a beginner or a review! Thanks!

[@RezaDorrani]

Glad it was helpful!

[@jackwebb7451]

Reza, great content and brilliantly explained. Thank you so much for investing the time and energy into producing such high quality content. Please keep producing your content!

[@RezaDorrani]

Most welcome! Thanks so much for watching and liking the videos.

[@oluwatobiyusuf]

Thank you so much Reza for another mind opening video.

[@RezaDorrani]

My pleasure!

[@antonpierre9049]

Hey Reza, Great Vid, I've been following you since my Powerapps journey began and I must thank you immensely for literally walking me through step by step in this process!!!!!!!!! though if I were to change one of the datacards from a dropdown to textinput, then how would it be written back to SharePoint

[@RezaDorrani]

Thanks Anton! You would need to ensure it sends data back in format a choice column expects which is {Value:”text value”}

[@ManikandanNadar]

I have been watching your videos and developed a solution for my business problem. Thanks so much for such a comprehensive learning session. i wanted to know, how is it that you always have these small or controlled fonts when connecting to forms with new data sources. when i try, it is always huge!!

[@RezaDorrani]

Glad to hear the feedback. Thanks for watching and liking the videos. In this video itself, I show tricks on how to change the font sizes in data cards in one go.

[@ManikandanNadar]

@@RezaDorrani appreciate your quick reply and i followed the steps both for data cards and keys from this video. but when you created new form and connected to data source, the fonts were same as you set before, in my case, i have do that process all over again...

[@RezaDorrani]

@@ManikandanNadar Not sure why that would be the case. Its out of the box behavior. I will recommend posting you issue with screenshots on the forums at powerusers.microsoft.com in case someone has run into a similar issue.

[@ManikandanNadar]

@@RezaDorrani sure will do and thanks again!

[@toniserrano6167]

Wonderful Reza!! How much is learned with your videos!! How should the gallery be configured so that it only shows the items created by a user?

[@RezaDorrani]

Thanks Toni. Filter by person - kzbin.info/www/bejne/qoHbdpJjeciKock

[@HungYaoLiu]

Hey Reza, I’d like to thank you for providing such great content and have learned a lot from you.

[@RezaDorrani]

Awesome! Thank You.

[@LAXMIKANT1992]

It was a good revision for me. Thank you for always helping us out. Just to ask previously in your videos to make edit form to view and edit you always take variables like varformdata and varformmode. But in this no such thing done. BTW this one was more easy than previous one. What is the reason behind that. Any pros and cons of using the variables for changing the form mode like you done in your several videos?

[@RezaDorrani]

Variable is a better option from a performance standpoint for complex forms (large columns). However in simple form scenarios, direct connection to gallery is ok.

[@simonball5602]

As always, amazing content. You have taught me so much. Thank you!

[@RezaDorrani]

Thank You for watching

[@alexotoous]

all the form hacks I needed. Thank you

[@RezaDorrani]

Most welcome

[@shivaandure8130]

Amazing Bhai, More Power to you.

[@RezaDorrani]

Thanks

[@carlw]

This was dynamite, concise and succinct information! Much of this I've done over the years but a tremendous refresh. 😉Thanks Reza.

[@RezaDorrani]

Glad you enjoyed it!

[@gabriellopez505gl]

Thanks very much Reza for all your video!.

[@RezaDorrani]

My pleasure!

[@ITMechanix]

Really a good video ! I learn much from this video.. keep it up bro....

[@RezaDorrani]

Thanks so much

[@tomasdonaghey]

Another great tutorial, thanks.

[@RezaDorrani]

Thanks so much

[@jpjameszhang4675]

Very good instruction material !

[@RezaDorrani]

Thanks

[@ThaoPhan-mv6kz]

Excellent tutorial, thanks a lot, Reza! I have 2 questions: 1. Why my default mode when connecting to Sharepoint is always Portrait/Phone screen? 2. When I edit fields, it does show my added fields in the preview, but when I save it and close the tab, access again through Home->Your Apps, it does not show my added/changed fields but only the original version and the multiple choice becomes Item 1,2,3 instead of the actual values? Thank you in advance.

[@RezaDorrani]

1 - you can always create a blank app using tablet layout and connect to SharePoint. 2 - you have to publish the app in order to see the changes in run mode

[@sharadshaji]

Hey Reza !! Thank you for this wonderful video. Do you have a video on how to design the screen with the gallery and form control which you displayed at the beginning of this video?

[@RezaDorrani]

Thanks! I do not have a specific one on that exact design but have done quite a few for gallery designs. They are all in my gallery playlist on my channel.

[@spen2431]

Sme amazing "nuggets" in this one. Thanks Reza.💥

[@RezaDorrani]

Glad to hear that. Thanks for watching.

[@alexchang414]

Hi Reza, A great video once again. I thought I knew everything about the forms, but obviously not.👍🤗 Thank you. You explained it in a very succinct structured way with clear details. 👍👍🤗🤗 good work mate👍

[@RezaDorrani]

Glad it was helpful! Thank You so much for watching!

[@massimocolaceci]

Thank you for the thorough content

[@RezaDorrani]

Thanks so much

[@ehabgirgis5596]

Hello Reza, Really your chancel very useful to anyone using powerapps, I need your help I did everything as per your videos but when trying to open summited list, screen disappeared completely and give me blank screen with getting data! not able find solution for this issue. I'm confused about modes and how can I use in proper way.

[@RezaDorrani]

Thanks for the feedback on the channel. I will have to look at your App in action to know about the cause of your issue. I would recommend posting your issue/query with screenshots on the forums at powerusers.microsoft.com

[@cxtran]

Hello Reza, Thank you so much for creating this video. It helps me a lot as a newbie to Power App. Do you have any plan to create video on how to handle multiple forms, parent/child form relationship, something similar to the repeat section, or repeat table of InfoPath. Again, thank you!

[@RezaDorrani]

Thank You. I have done videos on multi part forms and editable grids in power apps. Check the videos on my channel.

[@payalshah9676]

Hello Reza, I loved this video! I was wondering if there is a way to lock down the specific record in the form ; so if there is a person editing it there is no conflict?

[@RezaDorrani]

Thanks! I'm not aware of a method to lockdown records.

[@sreeroy]

Thank you Reza for this very practical video. I'm building my first app and your video was immensely helpful. I've a similar setup for my app, SharePoint List connected to a canvas app. I'm running in to an error when I edit existing records using the SubmitForm function. "Network error when using patch function: The specified column is read-only and can't be modified." Any idea how to find out why this is the case? Submitting new records and editing those generate no error. Main problem appears to be with items that pre-existed in the list before I started the app. Thank you ! 🙏

[@RezaDorrani]

Thanks Sree. I have not come across this issue hence not sure what the reason could be. I recommend posting your issue with screenshots on the forums at powerusers.microsoft.com

[@kps204020]

awesome introduction. Thank you

[@RezaDorrani]

You are welcome!

[@akkaradechsrithongchai7766]

Again, Very good explanation

[@RezaDorrani]

Thank You

[@MrPsith]

Fantastic ! Video show case, supper thank you, Reza

[@RezaDorrani]

You are most welcome

[@MegaKumar0]

Always great inspiration by your explanation Raza..

[@RezaDorrani]

Thanks Dilip

[@sunitasingh9467]

This is super helpful.. Thanks

[@RezaDorrani]

Glad it was helpful!

[@akilabenjamin8268]

Thank you So much, Raza. I have an issue with my room booking application. when someone Books a room I want to disable that range of time and also if someone else tries to book that same room including that same time range, It should be prevented. Ex:- (A) booked 9.00 to 10.00 and (B) trying to book 8.00 - 11.00 = "Should be Prevented"> How should those codes be done?

[@RezaDorrani]

I do not have a video reference on this scenario and would have to try it out to provide guidance. I would recommend posting your issue/query with screenshots on the forums at powerusers.microsoft.com

[@nazh09]

Hi Reza. Great videos. I learn a lot.. I have question, Is there a way to Edit a form then submit as new form(to create a new record ). It will serve as copy paste with changes. thanks in advance

[@RezaDorrani]

I do not have a video reference on this scenario and would have to try it out to provide guidance. I recommend checking on the forums at powerusers.microsoft.com/ in case someone has done something similar.

[@husseinrefaat2287]

Thank you Reza, a great video with clear examples as usual. Could you please make one video on how to complete a multiple screen form control offline that stores the submitted data to a sharepoint list once connected to the internet 🙏

[@RezaDorrani]

I make videos when I get multiple requests on a particular topic. Every quarter I ask subscribers for topic suggestions on the Community Tab of my KZbin channel. Subscribers vote for topics and the highest voted topics get added to my backlog. Make sure you post this in the next topic suggestion post. If it gets a lot of votes, I will add it to my backlog.

[@husseinrefaat2287]

I wish your replies are sometimes as simple as your videos :) I’m surprised you haven’t covered this topic until now. I watched a few on offline mode but none of the videos are yours. Anyway, I’m sure it would help a lot of people and thank you once again for sharing your knowledge buddy.

[@RezaDorrani]

@@husseinrefaat2287 If it gets a lot of votes (requests), I will make it.

[@aithavarunraj2747]

Great work as always 🎉

[@RezaDorrani]

Thank You

[@adamshrinah2595]

Thank you very much ! Informative reach video

[@RezaDorrani]

You are most welcome

[@ganeshhon8345]

It really helpful me, Thank you so much👍

[@RezaDorrani]

Most welcome

[@kimberlyshaddrick-kz2xl]

Hi Reza! Thank you for making all these videos! They are extremely helpful! I have a question. I have a form upon saving (on success) you are navigated from the form to a success screen then On Timer End I want to navigate back to the previous page but see the updates reflected. Is there a way to achieve this?

[@RezaDorrani]

I may have done a video on this (200+ videos). Dont remember which. You would need to check. The updates would be reflected on home page gallery. This is by design.

[@kimberlyshaddrick-kz2xl]

I figured out back(); form.updates but it is edit mode not view mode

[@RezaDorrani]

@@kimberlyshaddrick-kz2xl Not sure if this worked for you or not. I would recommend checking or posting your query on forums as well powerusers.microsoft.com/

[@atulvijay100]

Hey Reza, you are videos are a life saver. I have a question. I am using form & gallery in same screen & need to save them in sharepoint list under the same title. I am able to save them in 2 different rows but I need them under one row. Can you help me out

[@RezaDorrani]

Form gallery same screen kzbin.info/www/bejne/fnm7fJl4Zs50fpY

[@techyshadab]

Hi, I'm very thankful to you for videso, I learnt a lot from this. I was very scared in power apps but now I'm little bit confident. I've one question if you don't mind, Could you plesae let me know which screen recorder and video you used for these?

[@RezaDorrani]

Glad to hear that! The more you work with Power Apps, the easier it gets. I use Camtasia.

[@techyshadab]

@@RezaDorrani Thanks. One more thing, in this playlist there were 27 videso and today I noticed there are 28 and 28th video is from another channel. could you please check or maybe i'm having some confusion.

[@RezaDorrani]

@@techyshadab I fixed it! Thanks for letting me know.

[@techyshadab]

@@RezaDorrani Power Apps for Beginner

[@RezaDorrani]

@@techyshadab I fixed it

[@sundrapillay6668]

Thanks Reza excellent as always

[@RezaDorrani]

Thanks again!

[@popgal185]

Great video thank you so much!

[@RezaDorrani]

You are so welcome!

[@clay4gli]

Outstanding information.

[@RezaDorrani]

Thanks

[@pavanikannayagari]

Hi Reza, Thanks a ton for the wonderful lecture. I have a small question , like how do we rename the text label datacard(Attachments field which is not in the sharepoint list). I did unlock the field but unable to change the name.

[@RezaDorrani]

If you unlock the data card, you can simply double click on the name of the label control from the left navigation tree view to change its name.

[@pavanikannayagari]

@@RezaDorrani oh ok! But I wanted to change the display name on the form. I think the Display name can be changed in properties panel. sorry if I'm wrong :(

[@RezaDorrani]

@@pavanikannayagari I dont think Im understanding your question. It would be best to post your issue on forums powerusers.microsoft.com

[@naderhayek3310]

You are a genius. Thank u so much

[@RezaDorrani]

Thanks for watching

[@renataaugustinova1399]

Hey Reza, thanks a lot for your wanderfull channel. Can I ask you for advice how to move cards in powerapp form ? In your video you do it without problems but I am not able to move cards by drag and drop. I cannot find any reason why. Thanks a lot and regards from Europe - Czech Republic.

[@RezaDorrani]

Thanks Renata. I have done multiple videos on form control where I showcase moving cards. I'm not sure why it does not work for you as it is an out of the box feature. Wondering if it has something to do with your browser. Il recommend posting your issue with screenshots on the forums at powerusers.microsoft.com/

[@renataaugustinova1399]

@@RezaDorrani Hi Reza, today I succeeded with card moving. If I open Power App direcly from Microsoft official sites then it works. If I open it from Edge browser it doesn't. Strange. I thought you could be interested. Anyway thanks for your "hint" 🙂🖐️

[@Ghulam1957]

Simply genius!

[@RezaDorrani]

Thanks

[@felipesignorellireis7839]

Hi Reza, some help,: inside the default Layout form from microsoft lists, we can write some description for the item (the new column created. I usually use to explain some rules for the user). Question: Inside Power Apps, creating a custom layout, what is the option inside power apps that mirror that description? Or I have to create a box and write again the description and organize that box the way that I want?

[@RezaDorrani]

Power Apps cannot read that value. You would need to manually add them.

[@felipesignorellireis7839]

@@RezaDorrani many thanks again Reza. Cheers from 🇧🇷