Formula Supra gets a roll cage, Custom Dimple dies and the DomSpec treatment.

[@DJInclined]

Shout out Dom really knows what he's doing.

[@sterling5543]

I can watch this dude fab all day, true art.

[@MrJef06]

Me too, I love watching TIG welding!

[@cerealkiller8572]

🤝

[@mechanicalmisadventures]

I know right! I love series like this. Its a case of just watch, and learn. Am i right?

[@amadafaka]

That Pittsburgh tube bender will b marked up 20% after this video. Then a 110% return due to Dom not included in the box.

[@TerminusVox]

It's a treat to watch Dom work. It's awesome how he has planned the whole thing through. He knows what has to be done and in what order.

[@mikeejhordan3397]

Best Fabricator i had ever see... His the man... No words to say just simply "need increase"...

[@allothernamesbutthis]

watch project binky for some more crazy fab work.

[@colbybryant4880]

This fact that Dom goes above and beyond shows his love for the artwork and it’s amazing. #DomSpec

[@thanosdv4501]

the whole thing seems to be dialed so far ...everything looks so clean !!

[@KeenanStyles]

Damn, can Dom build a roll cage for my A80? Send him over to Tokyo Ryan 🤣

[@Ryan-cx4ni]

Honestly insane to see someone build a cage to this degree. Amazing talent

[@ZeroFoxENT]

Dom is a next level fabricator. I love that you all dont have the most expensive equipment, but everything he touches looks top shelf. Well done!

[@paradick4964]

this is ART!! could watch this all day. been working with metal for 5years and im no where near this. pls paint the cage some bright looking colour so anyone can see it with a single glance

[@Tim82621]

Dom is a wizard man, his work is always so clean

[@Xanthus723]

Wow Dom is a master of cage making. That is pure beauty. Can't wait to watch more of the build. Super appreciate the effort you're making to show the whole process!

[@GrindhousePerformance]

Love seeing the tricks of tacking temporary tubes to the rear cage to keep it all square, and the inclusion of the 2x1 box to support the areas you clearanced the wider tire. Awesome, awesome work, hope to see more vids of this guy smashing fabrication out

[@hakimyusuf5370]

I appreciate how Dom doing his job. Working with super detail and perfect

[@martaudreybitang5521]

Its a good way to end every week just watching this thing to become a one of the best build in youtube.

[@mikyapakdot6727]

Love the content..keep it going love to see more of this build...

[@DVerbe]

Don is a artist, people like him are very rare. Good video and grtz from belgium

[@ganggasuwana9458]

Dom Spec means perfection

[@brapgarage]

This might be the most fascinating build I've seen in a decade. Love the depth of the videos. Ryan's obviously a great dude, and Dom's precision is awe-inspiring every time.

[@johnshaft5613]

Great video guys. Clear presentation of the work done, good problem solving hints, impressive skills, and best of all, minimal attempts to clown around/be humorous like a "reality" TV show. Subscribed! I wish I had Dom on retainer, he is clearly a very skilled fabricator. I wish I could TIG like him.

[@rickd955]

Just awesome in dept video, thanks a lot guys. Greetings from the Nordschleife.

[@caseymiddleton6878]

I’ve watched all the vids in this series multiple times man I can watch Dom metal work all day!!!

[@ghostpunkkilla]

That Little Red Express at 19:03 Amazing work by Dom as usual!

[@r.aiyappa.k]

Why can't I like this video a million times by myself!? That fabrication is a sculpture. Amazing work!!

[@wlawson86]

Roll cage building looks extremely satisfying, both from a safety and precision craftsmanship standpoint.

[@PerplexedPhoton]

This video needs more views dude, what the fuck? This formula supra is the real deal and it's amazing to see all the skill and hard work needed to build such a competent machine.

[@FDGoDFlasH]

This is the best I've seen lately! The welder is just a magician! Thanks for this video!

[@Kastra707]

Sick shop boys, great work! I could watch this all day

[@micros95]

This men knows what he is doing! Thats a really nice cage!

[@Pimgaathard]

Insane craftsmanship! A true piece of art 👍🏻

[@AGRFABRICATIONS]

wow, Dom´s work is piece of art ! Hats off

[@baxrok2.]

Unbelievable craftsmanship. DomSpec.

[@CraigPlus2]

Dom making his own dies for the oval speed holes makes the cage look so much better. Keep it up Ryan, I'm enjoying watching you build your next race car. #RightArm #DomSpec #RaceCar

[@bengeisser]

Yes ! So clean. Keep up the insane work you guys.

[@gambit6186]

Do you think that FD needs to make a new rule about engine bay cages, or tying in the cage to the strut towers? Seems like it could help with car longevity along with safety...

[@sasjadevries]

In terms of safety it could also cause harm. Do you know why steering columns have to break off, collapse or bend on impact? Such that the steering wheel doesn't smash the driver when the front squishes together. That sort of thing would need to be researched first. Especially the diagonal ones from the strut to the center of the dashboard don't really make the car safer; they are basically what we engineers call "zero force members". I don't want to say his extra measures spoiled everything, or that the car is unsafe, the car is fine; I'm just saying that as an engineer I don't see that much of a benefit, and the extra measures COULD be (a little) harmful. And if you want longevity, then have a look at what the Russians have implemented with the Flanker F. They basically made a carbon fibre leaf-spring between the bumper and the chassis. The Flanker has already crashed into concrete multiple times, and the chassis is still as good as new; the crash absorbers turned out to work pretty well. On light contact with another car during drifts, the hood and wheel arches bend to the side and just spring back, without denting the other car. On moderate frontal collisions with concrete you only destroy your bumper+hood, and get them replaced. Last week the flanker had a bit more serious crash with a concrete block, so the carbon leaf-spring itself fractured, but it did still absorb the energy of the impact and the chassis is still in perfect condition.

[@gambit6186]

@@sasjadevries I don't think it's that big of a problem due to other racing disciplines that have been using it for years. And I wouldn't be considering the Flanker as a comparison bc it's a 1 mil car not a drift car built for FD

[@sasjadevries]

@@gambit6186The real question is not if you implement something, but how you implement something. The rallycar cages that I've seen are different from what we see in this video, they come together inside the engine bay, and then connect to a cross. But here they go through. The Flanker actually IS a drift car build for RDS and FD. Yes, it was actually made to fit FD regulations from the very beginning, it's a drift car that they made road-legal (not the other way around). In case you didn't know: professional drift cars aren't cheap, you can easily get into the hundreds of thousands of dollars for only a mid-tier FD car. More so: the carbon leaf-spring isn't that hard to produce, it can be produced way cheaper than the exhaust manifold that Papadaki got 3d printed. --- Kabargin (the man behind the project) first just drifted in a supra that he bought from someone, then he build his own drift cars, he slowly gathered more mechanics and engineers to develop parts for his own driftcars (viper, corvette, supra, lada, etc.). At some point he just thought: well, we make our own parts anyways, let's make a road legal drift car with it's own registration number. As a result you can see that the techniques and parts that he used have a lot in common with other driftcars.

[@trippnoutmotorsport3164]

They banned the bars to the front struts a few years ago. Would have to dig up as to why

[@allaboutcars1000]

Literally like watching an artist at work. Truely awesome to watch

[@deem292]

I am blown away by the quality of work I just witnessed. Also cool to see just a chill vibe while working. Nice job guys

[@evannoriega-thomas371]

such an underrated build on youtube right now. I love the detail of these videos.

[@vincencohan3626]

Dom work is a master piece for sure. Love perfectionist for this kind of work. Safety is no 1

[@usernotfound1423]

Cage building is so crazy! A lot of time and measuring has got to be spot on! I love watching you guys build that roll cage! Frickin badass!

[@ristosalonenrs2000]

The finest arch work I have seen in the video, thank you , Risto Finland.

[@mihalis1010]

I'm happy these videos are so long. I could sit and watch this shit all day. What a true dream job.

[@virginiomaldonado2746]

Amazing quality and fab skills from Dominic....💪💪

[@charlierojas6425]

He makes it look so easy! His work and imagination is so sick to watch.

[@juzDubbin]

Ryan, bro....I can watch these build series videos all day! I love watching the builds moreso than watching the fished product roll onto the track

[@ddrac]

Looks phenomenal. I adore the attention to detail so much.

[@adamreynolds1851]

Dom spec is sick ! Awesome attention to detail

[@BaseSRKI]

Never thought rolcage work could look soo gooood! Thanks

[@IntelEcoHD]

Good job ryan and dom must be one of you're best build Videos nice explaining great music short segments love it!!

[@knoxmr2]

Dom is making the standard in the industry going to have to step up their game~! The workmanship is next to none. This thing is SICK!

[@arvidkarlberg5845]

that is seriously beautiful craftsmanship

[@lars.a1298]

Amazing work to both of you 🤙 Loving the longer videos, Ryan 😎

[@abillyteetv2445]

Hooray for Tuerk for such a good detailed content on how they do it and Also with Dom being comfortable now throughout the Vlog. Cheers for the both of this dudes!!

[@zimble]

Man that thing is coming out sick. Dom is so talented. Loving the build! Videos are looking snazzy these days too. Really enjoyed this

[@Hangovna]

That is one talented dude. So fascinating to watch.

[@timforsthoffer868]

The amount of tech you show in this video is incredible, I love it.

[@Sophocles13]

Dom is a boss I just started kinda browsing this channel and it seems like he's got his finger in everything.

[@tezzrterry7485]

Very professional fab work. If you use cutting fluid on the hole saws, they last longer.

[@TRIP5_GAMING]

unbelievable roll cage work .. i wish I had the money and wherewithal to get something like that done in my GTI... not even that intense.. but up here in Buffalo N.Y. .. I can't seem ro find anyone who does roll cage work ..

[@aaronlagos5863]

That is one of the sickest cages i've seen. I can't wait for more content.

[@michaelkarlson1074]

Doms THE fab daddy. Love his level of workmanship he takes so much pride in his work! 💯

[@manifestgood]

Dom is a friken beast ! Cage is so dope!!! I’m in Cali, let me come help !

[@Max-lz5ym]

Ryan, from my heart, i love your videos! The content, the quality...lets my tuner/ perfectionist heart scream up!❤️

[@tomanycooks]

Dom seems to have the magic touch. good job mate

[@jhint1929]

For real man, I can't fucking wait to see that V10 in that car. I NEED MORE.

[@jerep1715]

Yo, just started to follow this build, i'm a sucker for those old v10 formula 1 engines.. used to watch those beasts race as a kid and the sound made an impact... Really this guy Dom is a humble skilled fabricator, but do you ever cut out his mistakes or does he even do them?! I mean, it's obvius he has craaaazy skills, spent some time in classes for sure! But it would be really healthy to show that even the best of the best make mistakes, cause that's how you really learn.. Good channel here, like the production and that humble mechanic 🙏

[@racingandmusicmylife]

This series is awesome and you show doms work which is even better 👍🏼

[@adriane7841]

Coffee just finished brewing. Perfect timing This build is #SupraDomSpec

[@deandavid9737]

Absolutely amazing. Brilliant fab work and awesome series. 👌

[@MDW893]

You know someone is good at something when they make it look easy

[@shiftyrx7]

Yesssss!!! Love me some fab vids!!! Dom is a genius!!!! Those dimple dies are awesome!! Id buy one ;)

[@stewartthompson5039]

Probably the best built Rollcage I've ever seen, serious respect to Dom, exquisite work.

[@LATRONNIK]

this is literally the only content on youtube that i'm pumped about these days

[@marceldewit8159]

Awesome work on that cage!

[@Rober0046]

Good work and good music in this video. 👌👌

[@infinitexsound6087]

Get that man a Beer!!! Dom Fkn killed it on that cage ...

[@vrooom666]

Beautiful bondage cage... really nice looking cage

[@user-ki5pl4lr6j]

Very good result! Good job! It looks amazing!

[@Rtechmobile]

The welding is glorious , truly an art form.

[@demydamn]

rollcage its so goood, hail dom for the artwork

[@Dickerlump1277]

DomSpec is dominating & spectacular!

[@jody6183]

Beautiful work 👍🏻

[@kyleeverett2532]

Could watch domspec vids all day dude straight kills it you can tell he takes his work seriously 💯🔥🔥

[@ryanaxberg9263]

thats crazy how good some people are at doing stuff

[@Timmy_T]

Another epic Sunday watch. Keep it coming!

[@danielspencer1973]

Such a sick build. Loving the detail and skill.

[@jeepsterc104]

Awesome Craftsmanship!

[@michaelacuna7212]

Mann I wish they have longer video times. I can watch this all day.

[@russellhagy]

That cage is a work of art.

[@erikskaggs2651]

That cage is a work of art. Nice work!

[@roguetorino]

Damn this cage came out sick. Function and Form in harmony.

[@WexWerxScott]

that's one hell of a roll cage... nice work Dom !!

[@cristiansanchez1355]

Hey I love the idea making thing different and your ideas are extraordinary, congratulations to Dominic, you have very talented people working with you, i wanna see engine fit in that amazing bay bro

[@stuart207]

Wow! Dom is the fabrication Meister!! 👍

[@colinede9352]

Shiet thanks for sharing the build man. Entertaining and Infomative. Perfect 👌. Love this project good work guys

[@hybrid_lord]

Cleaner welds then machine made bmx frame out the box. That clean that’s what it reminds me of

[@Tilpants]

Wow! Amazing level of detail!

[@ohlone209]

Probably going to watch all over again. That was BA

[@RiazRJ]

Awesome fabrication work 🙌🏼