FORScan Step 3 Coding AS BUILT using a Spreadsheet

Step 3 Using a spreadsheet to code AS BUILT
Switch ELM USB adapter here:
amzn.to/3BftuR4
Automatic switching ELS27 adapter here:
amzn.to/3iyipmx
OBDLink EX auto switching adapter here:
amzn.to/2WH0rGZ
OBDLink MX Bluetooth wireless adapter here:
amzn.to/3laAJEj
Visit my channel here
kzbin.info
Instagram here
autodad1
#forscan #forscanf150

[@seanrowland1670]

Great job,thanks for the video and info.

[@earlt911]

Great videos.. Greetings from Macomb Co MI !!

[@spike555]

I'm in GR so you're not far from me. I have a fleet of commercial vehicles and I'm changing the power point time out and trying to change the speed limiter, power point I figured out with the spreadsheet. Speed limiter I can't figure out. Being commercial vehicles there is no "easy" way to making the changes, must be "as built'. Any help would be appreciated. F-59 stripped chassis. 2020 and newer.

[@jasonkhammo9275]

Question Auto dad I would like to upgrade my 4 inch sink one to sync 3.4 with a 8 inch screen in the T harness I was told I need I am very capable with foreskin is it basically simple as is just saving my ass built information on my 4-in screen and buying one from a junkyard I'm transferring the info to that or do I have to get it programmed

[@13cardenk]

Will the F150 spreadsheet work for an expedition? (2018) ⚠️

[@mladenfrank2613]

I have done changes through BCMii and PCM to increase power of CMAX 2,0 tdci engine (european car, year 2011.) with downloaded .vbf file. ABS and traction control are not working now. Can I return everything back to start point via saved profile or any other way? Can you give step by step advice? I am total newbie : D THX

[@stevebrosnan8628]

Video 3, still with you....Maybe I'm being lazy here, but I have a question for you. I'm getting in to Forscan, for one reason. I have to help my recently widowed Mom with her 2015 Edge. I won't go into the whole story, but bottom line is that one of the things I need to do is put a new battery in the car. I want to step up from the flooded T5 to an H6 AGM with higher CCA's, Ah's, and RC's. One of the primary things I need to do with Forscan is change the battery type accordingly so the charging algorithms are correct for the new battery (in addition to resetting the BMS). I have not done that yet, my plan is to do the work this weekend. Your videos have helped me tremendously, and I continue to thank you for them. As you've mentioned, things have changed in the past few (like they always do, I suppose). I'm hoping to use the NOT AS BUILT option, but I am capable of using the AS BUILT if that is wiser. I've read that there have been some issues with the non-AS BUILT. Something about language not translating. Could be hogwash, idk. Do you have an opinion on using AS BUILT, or non-AS BUILT to change the battery type in a 2015 Edge?

[@stevebrosnan8628]

Besides not being able to fine a spreadsheet for a 2015 Edge....

[@AutoDad]

I personally use both. Depends on what I need to accomplish. Never changed battery settings

[@stevebrosnan8628]

@@AutoDad Fair enough, I'll report back here with the results when I have them. Thanks! (This is her 4th battery in 6 years...something ain't right. Wasn't my problem till now though... Dad's laughing his ass off wherever he is. )

[@MW3HAXX]

Are you able to program new strategy code from a valve body for a transmission?

[@AutoDad]

No, that is in the ECU

[@richclark5478]

I have a 2012 F150. Looking to activate more gauges to the drivers display, menu currently only displays trans temp, which I have a gauge for, looking to get speedometer, boost, oil temp and other usable indicators, can FORScan do this?

[@AutoDad]

With the age of the vehicle you would have to research it

[@stevebrosnan8628]

I understand you didn't like the turn signals as DRL's. Just curious...if you left them that way, what happens if you are driving, and activate your turn signals?

[@AutoDad]

They become intermittent like they should be

[@epoweredrc]

I don't see the spreadsheet option under the forums, do you have to be registered with the site before you can see it? I tried to register and it keep saying not all questions answered. I wasn't sure under truck type what all it wanted. I put F-150 ext cab, 2.7L twin turbo 2017 and it didn't work.. the question says Vehicle: * Model, engine type and capacity/power, year what does it mean by capacity? Thanks

[@AutoDad]

I thought there was a link under the home page of the forum

[@joespanojr]

Can you change the lights to have the DRL on instead of the low beams?

[@AutoDad]

I do believe it would be setting the parking lamps as drls

[@robertdrinnon4969]

Yes Auto dad I got a 2012 Ford F-150 we hooked it up to fourscan I got a bunch of error codes I don't know how to clear them it won't let me clear them or run any self-diagnostic checks on it so if you could steer me in the right direction I sure would appreciate it my name is Robert

[@AutoDad]

I have never heard of such a thing. Try using the factory reset feature

[@stevebrosnan8628]

Dude, nice bruise inside the left arm...tell us the story...