About applying and removing stickers: the window cleaner hack. When you apply a sticker of any kind, wet both the surface and the entire glue side of the sticker, this way when you put it on your bike it will slide across the surface so you can always get the perfect alignment and plenty of time to squeeze out potential air bubbles. It will take half an hour for the soap to dry from under the sticker but it won't weaken the glue at all and the end results look like they were applied in the factory. Also works great for tinted film and really anything involving adhesives. Window cleaner is also great to remove stickers. If you have to remove them get a plastic razor and pick an edge that looks easy to lift, and spray some window cleaner on it. Give it a second, then lightly tap the plastic razor on it, don't try to lift it, just wedge it between the surface and the sticker and pull away as soon as you feel resistance. You're not trying to lift the sticker, just creating a gap for the soap to slip under and form a layer between the sticker and your bike. When eventually you have done this enough times to create a lip you can actually grip, start sloooowly pulling it BACK *NOT UP* as flush as you can to the body of the bike with one hand, with the other keep spraying window cleaner as the edge recedes. If you do this carefully enough not only it will leave 0 glue residues, 9 times out of 10 you can even reuse the sticker. If you get some residues just use the plastic razor to clean them, you won't scratch the paint no matter how hard you try.
@kunaalthakur1381 Жыл бұрын
Thanks for taking the time to share
@x-man5056 Жыл бұрын
Hair dryer is god send for vinyl decals.
@acidmonster Жыл бұрын
I worked in vehicle wrapping, can confirm we did this although some vinyls or sticker materials will wear a lot quicker if you use this method. I reccomend using a heat gun once you've got the sticker in the right position to dry the water a little faster if it's a smaller sticker and push bubbles out once it is starting to dry that way it doesn't shift ☺️
@dumbcat8 жыл бұрын
Best motorcycle mod: decrease slack in the throttle cable. Many dealers sell new bikes with extra slack in the throttle as a safety measure and most riders never adjust the slack. Cost = $0.00
@hvymtal85665 жыл бұрын
do keep a little slack though. Instant engagement is great for those feelz, but having zero margin for error can lead to bad things happening
@robslover29594 жыл бұрын
My nc700x had a ridiculous amount of slack when new.
@SkinPeeleR4 жыл бұрын
Clutch to.. My new bike wouldn't get into neutral new. Only when the engine was off. "They are known for it...." yeah right. Adjusted it a bit and it shifts to neutral without any problem.
@elfelon94653 жыл бұрын
@@SkinPeeleR how did you do that?
@SkinPeeleR3 жыл бұрын
@@elfelon9465 By adjusting the slack on the clutchlever. MC garage has a nice tutorial on youtube.
@c0mputer8 жыл бұрын
Screw these dudes, keep winking! Whenever you wink, I wink back ;)
@kenshien5445 жыл бұрын
weird
@imgonnatouchyoun1gg45 жыл бұрын
gay boy
@ljgarrison69105 жыл бұрын
@@imgonnatouchyoun1gg4 You spelled 'prolapse' wrong
@ralphlauren29034 жыл бұрын
We have a winner ladies and gentleman !! The c0mputer!!
@IstasPumaNevada6 жыл бұрын
I like how in your product showcases, you never shy away from mentioning the drawbacks you've noticed.
@AndreBrah4 жыл бұрын
so im here again, i own no bike, yet i keep watching his videos, they are so well put together
@Mhmhmhmhm7 жыл бұрын
I feel like he's letting me in on some secret information every 76 seconds when he winks
@laimis6384 жыл бұрын
FBI wants to know your location.
@dr.piyaldeb4 жыл бұрын
morse
@vwtransportersandmotorcycl37293 жыл бұрын
😂now that you mentioned the wink I can’t stop looking at it
@iimagine_slayz96563 жыл бұрын
@@vwtransportersandmotorcycl3729 it’s bc he tweakin
@sic.41913 жыл бұрын
@@iimagine_slayz9656 he mega tweakin
@sk8urmind18 жыл бұрын
To sum up the comment section. 80% Is about how he's winking. 20% About the actual video content
@aydict5 жыл бұрын
1 percent are comment like these
@kajvanheerwaarden91345 жыл бұрын
Perfectly balanced, like all things should be
@raynjpg5 жыл бұрын
2:01 "At worst, it's ugly." Good job Ryan, keeping it simple. Keep it up.
@DG_4277 жыл бұрын
I swear you could be Quentin Tarantinos kid.
@AdvBrewery6 жыл бұрын
Lmfao
@hemigod25 жыл бұрын
spot on, they both can lick the tips of their noses right?
@glenholmgren12183 жыл бұрын
Nahhh, Too Intelligent and articulate and better video production skills. 😎🤙🏻
@Real_MisterSir8 жыл бұрын
An addition to your list, is a very cool mod I just did to my bike earlier today. It is hooking up a cigarette/usb outlet to the handle bar. It is super handy for gps systems on longer trips, or even just to charge your phone while you are on the road. It is also incredibly inexpensive, some models only costing a few bucks, and can be found both in hardware stores or ebay. Instalation is also some of the most easy to do jobs, just hook positive nd negative to the battery, cable tie the wiring somewhere which is not exposed, and you are done!
@FortNine8 жыл бұрын
Sweet mod! I've got a 12V plug on my bike and I use it *all the time*. ~RyanF9
@shahidachannel49217 жыл бұрын
Daniel Kemnitz bom
@aridinglifestyle41428 жыл бұрын
its like he blinks each eye individually
@VeritasEtAequitas7 жыл бұрын
Fukken lizard people, man. They're everywhere now
@WickdPerfekT7 жыл бұрын
ARidingLifestyle i commented the same thing.
@mmmmmmannnnnnn6 жыл бұрын
ARidingLifestyle man that's all I see now
@danielschmitt55646 жыл бұрын
Hail LORD ZUCC
@ipwnzyanoobz6 жыл бұрын
Probably just an eye spasm in his left eye, completely normal some people just have it.
@SnewJ8 жыл бұрын
Thanks man
@DaBaldMan4 жыл бұрын
Your're welcome bru
@charliechristianblanchard15824 жыл бұрын
U famous bro I know you u from the other channel snewj
@ankitnarsinghchhetri3 жыл бұрын
Yo you watch F9?? *DYAMN*
@manny755866 жыл бұрын
I love bar end mirrors. The view feels much clearer and I don't feel like my field of vision is being totally obstructed in front. I wish more bikes had them.
@TheJeeperx8 жыл бұрын
Something you should note on the handlebar change, depending on how different the new bar's shape from stock it can change they way your bike feels entirely. Seems obvious but should be mentioned anyway.
@amycollins60072 жыл бұрын
Yes, I was surprised he didn't mention this
@clayman0128 жыл бұрын
Very professional video. Never once zoned out and this was my 5th top 5 video in a row. Good job man.
@FortNine8 жыл бұрын
Thanks! If we ever need a "Top 5 Top 5 Videos" video... I'll let you know haha. ~RyanF9
@jonrineer31158 жыл бұрын
+FortNine do u ride if so what
@nazimelon66538 жыл бұрын
+Jon Rineer you know, that big Suzuki standing behind him is just for Looks an way.
@fightnatis52758 жыл бұрын
+Nazimelonhamster no duhh😂😂
@nookingo8 жыл бұрын
the only thing if it got installed.. but is not necessary, I agree with you
@Bigmackenzie8 ай бұрын
OMG little babby Fort Nine! 7 years later video still holds up, nice work bruv!
@micharoszkiewicz20317 жыл бұрын
this is from technical point of view insanely well made video - back lighting, editing and quality - spot on. good job!
@SquidWithGear8 жыл бұрын
lmao $20 for that progrip pad... i bought that shit off ebay for 83 cents from china #3weekshipping #thriftshoppin
@DeCrazyMadness8 жыл бұрын
o shit it squid
@Kevin.BTCChina8 жыл бұрын
mmmmmmmm quality chinese parts
@charlesbeans23988 жыл бұрын
I'm over nighting parts from Japan
@AA-ly2zd8 жыл бұрын
chineeeeezzzzzz shoppin is the best brah
@RickyNelson08 жыл бұрын
Had a Progrip one that worked great for 4 years before falling apart, replaced it with a cheap chinese rubber-like one that didn't last a month. You get what you pay for..
@BasseC054 жыл бұрын
Ryan: Motorcycle mods under $50 Actuall price: $49.99
@mohtasibsherzad39743 жыл бұрын
re watching this guys old videos, and oh mannnnnnn, he has definitely come a looonnnnngggg wayyyy. keep up the good work buddy!!!!
@bmwkid19938 жыл бұрын
I agree with the handlebars for sure. I've had 3 sets of bars (including the Emgo drag bars) on my bike, it's almost like having a different bike each time.
@tom730556 жыл бұрын
Why do people have to be so judgmental on someone’s looks and expressions .this person knows how to sell products and can speak clearly and doesn’t have loud music playing in the background .I think if you don’t like what you see go somewhere else ..IS IT SO cool to cut people down for doing something good for others . I want to say thanks for the videos Ryan very well made
@AmamMcMam7 жыл бұрын
I bought some bar end mirrors of eBay and i tell you it brings out a sexy look to the bike. These mirrors are also really good for me because i am quite wide so seeing behind on stock mirrors was a little hard, but these open up the rear so much more and decreases the blind spot in my opinion.
@250se27 жыл бұрын
People are so rude,why don't you guys just focus on his contet instead of him appearence? And is that a V-storm?nice video btw
@sonomajmw7 жыл бұрын
Joko Zus i am glad someone spoke up and said the kind and decent thing.
@seba50936 жыл бұрын
they probably to yung for dis..
@hafltimeblind6 жыл бұрын
Sounds like a vstrom, if its the same bike used for the opening. My dad has one.
@joshuashea77155 жыл бұрын
Alot of worthless evil people in this world. Parents can't beat the hell out of their kids anymore. Ever wonder why the Amish are so successful? Hmmmmm? Great vid
@kalebbarant19905 жыл бұрын
Precisely why I don't post videos on my channel.. lol
@deckgun315 жыл бұрын
1) Didn't notice the winking, I came here for content 2) Content - Well presented. Gave pro and con in a "matter of fact" format, without wasting time. Even though I probably won't use these, I learned some things about my bike, and the accessories I might want to use. Thanks for the info. I would watch other videos you create/post.
@timothycoyne58743 жыл бұрын
Nice video and some great ideas. Except maybe the flush mount indicators. Many of them are less visible to other motorists, and the last thing we need is to be less conspicuous. Also, bar end mirrors look cool, especially on retro and cafe racer machines, but keep in mind you’ll be diverting your eyes from the road ahead just a little linger every time you look down at those mirrors, compared to the factory set. But for some bikes there are inexpensive but sleeker looking mirrors to replace the OEMs though, and that might a better option. Just my two cents anyway. Keep up the great work!
@RB011385 жыл бұрын
I know this video is old but regardless, one thing I've always done when putting on decals (and would work for this as well) is take a spray bottle, use just slightly soapy water, apply it to the area that your putting the sticker on (you don't need much), then place the sticker, it won't immediately stick and you can slide it around until you have it where you want it, then gently dry (just dab, don't wipe), make sure there are no bubbles, and leave it to dry. I picked that one up from some old guys when we were restoring old sleds, works well on cars too.
@dumbcat8 жыл бұрын
I have CRG 'Arrow' mirrors and the image in the mirror is crystal clear and shows a very large area behind me. Far superior to my stock mirrors, which are actually larger. They also do not vibrate like bunny ear mirrors because they don't have a long arm. I've had them a while so don't think about it until someone who rides my bike comments on how amazing the mirrors are. Can't speak for the round version tho.
@ibez076 жыл бұрын
got no idea why this vid has 1k dislikes,,slick editing, high end production and straight to the point, im a big fan
@glenholmgren12183 жыл бұрын
Dislikes are from people with no riding skills who crashed and no longer have control of their digits.
@skeetersaurus62493 жыл бұрын
I always tell fellow-riders, 'be careful of reflector and lighting changes!'...in the U.S. and Canada, ALL VEHICLE LIGHTING must comply with FMVSS (or for Canada, CMVSS) laws...specifically FMVSS/CMVSS 108. If the lens meets the standards, it is stamped 'D.O.T. - SAE 108'...if there is no marking for this, the light or reflector DOES NOT MEET THE STANDARD...and gives less than minimum reflectivity or lighting output, and you can be cited for it! If you are curious, you can look up 'Federal Motor Vehicle Safety Standards' on wiki, or simply look up FMVSS Section 108 itself, to see what is expected out of a lens.
@BigPaPaRu5 жыл бұрын
I feel like your hitting on me....Im free Sat
@guirip53494 жыл бұрын
I haven't noticed anything weird about blinking. Great video, thanks for sharing.
@x-man5056 Жыл бұрын
Drag bars were the first appearance mod I did. Helped to take the "Dad Bike" look off of it. License plate tail hook dorky thing gone too. Exhaust wrap is a cheap mod that will spiffy up old scratched pipes or new ones if you like. Vinyl Wrap paint and pin stripe tape lets you get creative as often as you want. Doing my tank next. For a little more money, pick some pieces off your bike for powder coating (winter project). Think contrast and definition with out adding chrome. Vinyl decals can be creative. Makes a big difference.
@ironDsteele7 жыл бұрын
This is a great source for Canadian buyers and most of the time the best price there is. As most of us know, the Canadian Economy is a joke and no business wants any of it, so we're often stuck ordering from abroad or paying insane shipping prices from the US. I'm pretty thankful!
@CLRBLlND7 жыл бұрын
Love the cinematography and composition bro. I feel like you don't get that enough. great lighting and studio too.
@BuildAProWorkShop8 жыл бұрын
Very different compared to other top 5 videos. I like it because you didn't say the obvious things people want like hids, tail pipe, sliders.
@rileyspowersports69678 жыл бұрын
STOP WINKING AT ME!!!!
@eanraigvalrab37588 жыл бұрын
ikr xD
@o3tomas8 жыл бұрын
;)
@paulbarratachea93858 жыл бұрын
he has something in he's eye
@benlawton54208 жыл бұрын
eyes not eye he is winking in both of them all the time help me im scared
@jimbojones73408 жыл бұрын
He has something in he is eye? Are you sure you didn't mean to say HIS eye?
@muttbone015 жыл бұрын
Hells, I think he's a very likable an concise reviewer. Well spoken, an knows his stuff. Good job, mate.
@markn26418 жыл бұрын
looks like a lot of work went into this video i am impressed.
@zachone1727 жыл бұрын
Drink every time he winks
@FortNine7 жыл бұрын
That's a dangerous game. ~RyanF9
@greemstrider7 жыл бұрын
Loved the winks tho~
@europlebr32167 жыл бұрын
One tequila Two tequila Three tequila Floor...
@royalphoenix3957 жыл бұрын
lmao
@aidanreynolds97317 жыл бұрын
Hahaaha
@madmaz88908 жыл бұрын
ive done my 2010 YBR 125 cafe racer style, no mirrors, deep black with white vinyl stripes, rear cowelling and seat cowelling ( just need a re upholstered seat done in brown leather) black metal LED indicators, X on the head light, new exhaust (not very cafe racer but sounds nice) , some 7/8 drag bars, new grips and black levers, loving it!
@Trendy_endy2 жыл бұрын
You know someone is entertaining and fun to watch when you had no interest in the hobby before watching, and now watch all their videos. I don’t have a bike. I don’t plan on getting a bike. Before watching his videos, I had no interest in bikes. Now I watch videos on random topics about bikes frequently just because these videos are so entertaining and fun to listen to.
@JPVisuals8 жыл бұрын
would love to be sponsored by these guys. another cheap mod is levers I think. though if you buy brand, it'll run you more but if you're okay with eBay ones, you can get them for dirt cheap.
@chrisj19828 жыл бұрын
I wish they had a playlist like this for trucks
@macthemec5 жыл бұрын
For under $50 you could upgrade your headlights (LED bulbs) add a small windshield to take the wind off your chest, also a throttle lock for long rides
@me_ca1362 жыл бұрын
Dicovered thos chanel 3 days ago and allready watched at least 30 Videos:D i love your vids! Greetings from a New german fan!
@monkeyplayer13 жыл бұрын
5 years ago, finally getting financially stable to get one, watching almost all to catch up on what I forgot. Saying all of that about 200 dollars really made it cheap to me. Made it click how cheap it actually was.
@DarthxR28 жыл бұрын
dude you seem really cool and really knowledgable....that being said and with all due respect...you remind me of king joffery
@starguard41225 жыл бұрын
At 0:20 I have always wondered what that was for. Thank You! :)
@ML-oz2gr5 жыл бұрын
This channel is so great. Should have your own show on the idiot box here in Australia
@swolff12345 жыл бұрын
Love the video. Glad to see you didn't let the comments get to you. It doesn't look weird.
@illhaqu7775 жыл бұрын
these progrip tank pads look soooo good on like every bike.
@GTDpowah2 жыл бұрын
I'm binge watching this channel, even though I never owned a motorcycle nor do I even have a motorcycle license.
@andy29063 ай бұрын
Sick your message and content is perfect delivered to my door for free. Your a better man than I . Thank you Sir.
@jiricervenka83834 жыл бұрын
I will tell it like this ... for me this guy put a lot of points in charisma. :) Thumbs up and keep up good work. Thank you!
@alexbolen8 жыл бұрын
Great video - surprised at the haters in here. Super professional, loads of information, and entertaining. Keep it up! New sub here.
@mpawood3 жыл бұрын
For those living in the uk, with the bar end mirrors, if you like you can just remove them entirely. Its not a legal requirement to have mirrors on a motorcycle in the uk.
@Hithere-ek4qt4 жыл бұрын
I like the old 'bubble' grips for long distance riding. Comfortable as they fit your hand better than a flat grip.
@toothpik008 жыл бұрын
Your presentation and production quality is unreal. You need more subscribers. Here, have another one.
@tylerfortner89267 жыл бұрын
thats some SERIOUS cusomization bro.
@eatshit28634 жыл бұрын
That's not "faded yellow" , it's "baby shit green". You don't have kids. Your videos have gotten MUCH better over the years.
@just-dl5 жыл бұрын
For the flushmounts, maybe something that protrudes only slightly...1-2" vs the stalk that's stock. Less wonky looking; more visibility. Trade offs. For the tank stickers, I like the clear ones. Keep the beauty of the original paint, protect against zippers, keys, bling....DIdn't realize bars were so cheap. Good to know! I've seen some mirrors hanging down below the bars. not sure if I'd live with that, but, it's another way to clean up the view above the bar.
@daduncker20D8 жыл бұрын
this comment section is cancer
@MarvinGenaro7 жыл бұрын
daduncker2.0, hit me up for some chemo. ~$50 per session.
@Todd665 жыл бұрын
After discovering 1 video, I subbed. I have not been disappointed with that choice.
@tylerrue31088 жыл бұрын
I just put a ProGrip tank pad on my GSXR last night. Tank was hot from the sun, so I was able to get it on perfectly. Could've put brake pads and sprockets on there too. They're cheap and improve performance.
@kylelee90628 жыл бұрын
First time watcher, good video quality and very good communication skills. Makes the video flow so nice to watch! Defiantly earned my sub!
@FrenchysPlaysTV3 жыл бұрын
You can find the ProGrip sticker on Wish for like 4 dollars. Granted it takes like 2 months to arrive, but hey, it's only 4 bucks.
@Knight34343 жыл бұрын
I own that same green shirt. I wear it to work all the time. Respect.
@rafaelespinoza5963 жыл бұрын
Another great informative video well articulated. Thanks.
@kobanon8 жыл бұрын
good job dude, that was well organised and presented
@sniperwolf24548 жыл бұрын
Congrats! this a very well made video, you transmit the info nicesly. Thanks!
@zalo41398 жыл бұрын
holy shit the production value is great!!
@dannyboydt857 жыл бұрын
he's that prince from game of thrones isn't he?
@FortNine7 жыл бұрын
King*
@dannyboydt857 жыл бұрын
FortNine well played my friend, well played
@TheGhostPack7 жыл бұрын
+dan is awesome sho geoffrey lmAoo
@chewbakkah71448 жыл бұрын
Great video. Shot well, voiced well, and you felt natural in your cadence. I subscribed because of the quality alone. Now to go check out your other stuff!
@AznGoosey8 жыл бұрын
Another great mod to consider is a strong neodymium magnet! For those of you who own a scooter or bike and are have trouble waiting forever at a stoplight because the switch on the street can't sense your bike because it's too small compared to a car, I'd highly suggest it. Sticking the magnet to the bottom of your bike should help prevent that.
@Sahadi4208 жыл бұрын
I just run the light..........LOL No cop is gonna give you a ticket if you sit there for a second, then go. Hell, I do the same thing in my GT at certain "stupid" lights.
@Osprey19948 жыл бұрын
+Sahadi420 I know quite a few cops that would pull you over.
@Sahadi4208 жыл бұрын
All I'd do is go right back to the light after my ticket, and record how long the light takes to go red, and mine green, and record it. When it shows over 2 minutes at 4am, my case will get thrown out.
@FruityLittleBoy8 жыл бұрын
+OspreyBravo18 in Washington, state law allows for motorcycles to run red lights after one cycle.
@leothe1sg9875 жыл бұрын
Another great video. Bye the way in the USA, CFR governs the use of mods across the USA. 3.5 inches of signal surface is required for turn signals. So this flush mounts are a buyer beware. Safe travels.
@mw65632 жыл бұрын
That is too funny! I have those exact Kevlar grips… on my Gixxer.
@conner14664 жыл бұрын
1:45 what's with that lil wink u did there?🤣😂🤣
@sandwichmaker12894 жыл бұрын
He does that so many times this video, watch it again and try to count all the times he does
@conner14664 жыл бұрын
@@sandwichmaker1289 why? Has he got a tick/twitch?
@sandwichmaker12894 жыл бұрын
@@conner1466 i Don't really know, i guess it's just cool
@marinsrok61004 жыл бұрын
Wow, the quality of fortnine videos has gone up so much
@Puma44548 жыл бұрын
I shop on CanadasMotorcycle all the time. I didn't know you started to make a KZbin channel. Some advice, if you haven't yet, post it on your website so people can start watching the videos!
@blacksmithden4 жыл бұрын
30+ year mechanic here who specialized in material handling electric drive systems. The electrical connectors that come with those flush mount lights are called Scotch connectors. THROW THEM IN THE GARBAGE. They are the single worst electrical connector EVER made. Solder and shrink tube for the best job. Crimp on butt connectors with shrink tube insulation is second best. Butt connectors without shrink tube is third, but you're asking for problems from vibration and corrosion. What EVER you do, do not use those "squeeze and cut" garbage Scotch connectors that come with the lights.
@ironhorsegladiator50345 жыл бұрын
I only watch his channel cause they stopped the reruns of the Twilight Zone, yes, I am 80 years old.
@Fausto_48414 жыл бұрын
He did an awesome twilight zone tribute kind of episode, i think it was the DOT helmet one, or maybe one about old moto myths.
@nymetsfan9128 жыл бұрын
That progrip tank pad or any similar faux carbon fiber turns yellow after a short time. It's funny because I gave one to a friend who needed a tank pad on his 2012 Daytona 675 which was black n gold, and the pad almost turned gold from yellowing and he liked it. Haha
@1TruePatriot4 жыл бұрын
Haven't even watched the vid yet, but since I love Ryan's sense of humor, I'm often expecting the unexpected. Is it just me, or is he holding that object like it's either a "dental dam" (Google it) or a "feminine hygiene" product?
@arturszczeparski13518 жыл бұрын
I just have to say, maaaan, this edit and overall video making is great! Keep up good work, just subscribed because of this video :)
@RB__-wb9jd5 жыл бұрын
how does this guy not have 1000,000 subs yet?
@thesaltypanda11604 жыл бұрын
A thousand thousand? Lol
@naivanmladic94048 жыл бұрын
wow, born to present
@9EyeofLion47 жыл бұрын
I just discovered your channel and I love the content your putting out! Keep up the good work. It is very interesting and you make not boring at all!
@rusty23696 жыл бұрын
Just keep playing the beginning over and over it pretty damn funny
@wesdmf93735 жыл бұрын
I just subscribed. Very informative videos keep making them dude love the personality we can relate to Someone Like You unlike other channels with old stuck-up know-it-alls
@ayan32618 жыл бұрын
very well made video, i have the same tank grip and I seem to be the only one suffering from this, the lower half of the grip lost its sheen about 1 hr of riding and it now has a matte look?
@FortNine8 жыл бұрын
+Sgt. Aza Strange! It's normal for these tank pads to scuff up over time, but *definitely* not within the first hour. Have you tried contacting Pro Grip about it? Sometimes if the issue seems odd to the manufacturer, they'll just assume a manufacturing defect and send you a free replacement! ~RyanF9
@taylorb56818 жыл бұрын
I've had this same progrip tank pad on my bike since mid 2011. Still looking pristine as ever. Love it.
@israelg998 жыл бұрын
We meet again... Geoferry. Subscribed, I actually appreciate your pitching.
@UKFreedomFighters8 жыл бұрын
Mirrors that show you nothing, indicators that dont indicate where you are going as well..... some sweet 'mods' you got there brah
@samjohnson48317 жыл бұрын
Sweet. Bullet proof grips!
@PsychedelicRam4 жыл бұрын
I have the bar end mirror for my royal Enfield continental GT. It's perfect!
@KableMam8 жыл бұрын
So this is where you went after GoT
@dannydang47388 жыл бұрын
He was in GoT? What?
@KableMam8 жыл бұрын
No, he just looks like Geoffrey to me lol
@EpicWin20058 жыл бұрын
Bahaha true. Same douchey smirk.
@FlexibleToast7 жыл бұрын
Is that a butthole?
@ellislee32366 жыл бұрын
At least someone else saw the similarity😂
@SPEEDTRIBESAKURA8 жыл бұрын
Quality content bro! Keep it up!
@gronkgrunk8 жыл бұрын
Very practical. Good vid, bro. I'm now subscribed to your channel.