Found This After Pulling The Transmission On The 1000hp Duramax Build!

[@Kelbycostner1]

I wish there was a “Ryan’s diesel service and Kodiak truck in NC haha I do all the work on my Lbz but would be nice to have a shop I would trust as much as them.

[@gregfranks9038]

One thing I learned with performance boats and diesel trucks, when you think something is only gonna cost a certain amount, double that amount and count on it costing that much or even more.

[@TruckMaster]

That’s a great point I should have known before I talked is job 😂👍

[@SUBI_PaT]

Remember josh don’t count your chickens before they hatch buddy but you have Ryan an mark on your side an things will be together the right way an will have you going down the road straight an laying tires!!!! Earl your fired 😂

[@matthewmiller1172]

Love the nine blade whistle!

[@HighRiderSonoma]

That 9 blade turbo sounds crazy!!!!! Great job RDS crew.

[@bobbycakes]

Josh i thought the 10 blade was nasty! now the 9 blade just became my favorite. build that truck so the Bride is happy everyday!

[@joshhall1310]

That turbo sounds awesome

[@TruckMaster]

Definitely

[@darenthomas1212]

Been watching since the lbz was black, thanks for the content!

[@TruckMaster]

That was way back! Thanks so much 🙏

[@beardedguardian71]

Never owned a diesel truck but i love when they sound like a jet. I had a Buick Lesabre station wagon in highschool that had a diesel engine in it and it was a beast! If I'd put turbos on it....goodnisss. Lol

[@FarmerSteveO]

Holy cow, that nine blade! WOW! Ryan better put a disclaimer on his website, “may tend to tick off your next door neighbors during elevated idle”!

[@TruckMaster]

😂😂

[@michaelduran7147]

That sounds awesome...can you post a video on rebuilding my turbo with a nine blade? I'm in Texas, it's not like I cam run up the street to Michigan and have it done...lol

[@johnnyyoder2685]

Oh my goodness!!! Josh that 9 blade billet in the turbo is totally sick!!! WOW. RDS you guys rock. Keep up the build on WifeMax!!! Love your channel!!! Can't wait til next video. Thanks a bunch👍👍

[@TruckMaster]

Thanks Johnny it means the world!

[@chadrizla496]

@11:28--"You don't seem like the muffler kinda guy"🤣🤣

[@TruckMaster]

😂👍

[@ronthompson2366]

It's good to have great friends. You have great friends with the guys at RDS and Kodiak. This is what makes hot rodding fun. Patience is paramount and change is inevitable. You are getting the best advice and you are following it and that is what is making your channel worth listening to. Kudos to all of you. As for the Shorty build... same thing. It's going to be a show stopper. Looking forward to seeing it when it's ready. Truly enjoy watching this all come together. Here's something to talk with beard about... since you have the body off the frame. You plan to do some pulling with the WIFEMAX. What about additional support for the hitch ? Adding to it to strengthen the hitch and frame and transfer the energy to a better location in the frame ? To prevent frame twist from the torque of the pull. Again it's all part of the build process. Better to over build.. then break... Now might be a good time to fab some hidden brackets on the front. To hang weight on for pulling. I know in some forms of racing you need drive shaft hoops. To contain broken drive shafts. Take a look at the rules for the pulling you plan to do. These are things you can also do before the body goes back on the frame. Plus just falls in the build it right category.

[@TruckMaster]

I think at this point if I hookup to a sled I will snap those axles shafts 😂 all great point Ron thanks again

[@ronthompson2366]

@@TruckMaster very possible..but it would make great content... seeing Earl eliminated by Mrs. Truckmaster lol... keep up the great work. I enjoy seeing all your content. So, as always... looking forward to seeing what's next.

[@SALMONSLAYER06]

your videos are helpful. thanks for doing them. I watched this one who wouldn't watch when 1000hp duramax is in the title lol

[@shepherdsfleetservicesllc8147]

Good video. I agree don't rush it

[@TruckMaster]

Thanks 🙏

[@shepherdsfleetservicesllc8147]

@@TruckMaster np

[@shepherdsfleetservicesllc8147]

@@TruckMaster I just reported scammer wrote me on your page.

[@LBZ_Sean]

I have the Goerend R converter with a RDS 68/71 race turbo on a lbz. Had a different converter in before. Night and day difference with the 68 paired with the R converter. Love that converter.

[@TruckMaster]

Nice combo

[@wolfparty4234]

I have a question; I lifted my LB7 with a 6”lift and put 20”wheels and 37” tires. Now I’m blowing the 20amp fuse to the pcm-b and can’t keep a fuse in it. The ficm is still good and fixed all 4 grounds. Q; is it Vidal to program the ecm after a wheel size change? Any info will be appreciated!! Thanks guys !

[@richardharvey8939]

Love the work you’re doing

[@TruckMaster]

Thanks 🙏

[@Houndini]

Take your time, Do it right. I use to hate to get pushed in big hurry due to production as heavy duty diesel mechanic / cert. welder.

[@tonysims6858]

Take your time and do it right. Great content as always.

[@TruckMaster]

Thanks Tony!

[@builtbyme]

I have a Goerend DL 12 bolt thats 2300 stall with a socal billet flywheel I also have a goerend DK that worked great as well. Only swapped cause the 12 bolt. The DL lights up my truck no problem. Get a DHD lock up box to.

[@TruckMaster]

Lock up box is a must that’s for the advice as always

[@kerrylemoine3943]

Hey buddy! I was thinking about what the update for single cab durmax lately, then you said it. Everything coming along for your wife truck, too. Can't wait to see more channels!

[@TruckMaster]

Thanks Kerry

[@asianpersuasion1807]

Damn that 9 blade sounds so good

[@trentonnewkirk5395]

That lbz sounds sweet

[@TruckMaster]

In person it sounds way better that whistle is incredible

[@lbj808]

I own a 6.7 mega cab and recently acquired a 2004 duramax LLY dually as my next project. Your videos are on point!!..👍🏽…Aloha 🤙🏽

[@TruckMaster]

Much appreciated brother

[@MRW21783]

I have a LDS 64 on my LML. The high idle in the mornings is absolute heaven and all the Karen's hate it lol.

[@TruckMaster]

Them Karen’s be hating 😂

[@MB_PRODUCTIONS]

When that rolled off the trailer in the intro it looks identical to my daily lol

[@TruckMaster]

Nice 👍

[@Bryce367]

I wish you could just buy a 9 blade for a rebuild kit. Already have a 68mm but needs rebuilt.

[@kirk2999]

Keep up the great work

[@TruckMaster]

Thanks Kirk

[@trouthunter1235]

Will you still get a whistle with regular driving with a 64mm 10 blade? Like whistle barley hitting gas pedal?

[@TruckMaster]

Yes definitely

[@kxp.1496]

You should do a 8 blade turbo

[@timothyedwards9298]

you definitely need a dually love the red truck love the other ones but maybe it’s time for a new chapter

[@ronnieblair3091]

Convert the red lbz to a dually

[@TruckMaster]

I definitely have my eyes open for a future Dually build

[@6.2turbosilverado]

Should do a 9 to 10 blade comparison video!

[@TruckMaster]

I’m really thinking about it

[@walkerhayes4709]

Currently building my 2005 LLY. Why do you need to re-pin the harness? Was it replacing the injectors that called for it? Forgive me if I sound like a newbie, still learning. Thanks

[@haskellburks]

Hello Josh. You forgot to change the flywheel. Now you've got to fix the wiring harness.

[@DirtyDieseldude02]

Love the turbo. In a prior video, I noticed the stock flywheel on the block. I thought maybe you just haven’t gotten that far yet. You definitely want a billet flywheel if you’re going to be popping 1000 hp. The stock fly wheel is so flimsy in comparison. I don’t think it would last very long. Good video 👍

[@TruckMaster]

Thanks Jeff

[@timmothyshad1137]

I wouldn’t go that on high on stall lol. Building turbos if you size them correctly it will lite up real nice on stock stall.

[@noahseo8667]

Is Ryan going to release a 9 blade super core kit?

[@TruckMaster]

Not to sure on that

[@RippinGearz]

Bro… I crawled under my 06 LBZ today and discovered my body mounts to the frame and body as well as the rocker panels and floor supports pretty much gone… how much roughly would the shop that did the body work on the giveaway truck roughly charge to knock it out? I’m stationed in Jacksonville and would ship it to them. I love my truck and don’t wanna lose it to cancer (rust).

[@TruckMaster]

Give them a call it’s S&S but the mounts I paid for were around $300 in parts. Thanks your service brother

[@RippinGearz]

@@TruckMaster thanks bro! I couldn’t remember the name for the life of me and that giveaway was FOREVER ago lol. Where’s it at again so I can narrow the search?

[@7Skyz]

Do they make the 9 blade for the LB7s? On the site they only say 10 blade at the moment.

[@TruckMaster]

I’m not to sure

[@Jdoustou15]

That was me. I was that comment about the converter lmao

[@gearheartscott]

Do they make 9 blade for lml?

[@TruckMaster]

Not to sure I’d imagine so

[@gearheartscott]

@@TruckMaster because that would sound awesome on my truck

[@stephenmiller5023]

One thing I have learned Josh during all my projects I have ever built is that one change here , leads to 2-3 more changes there . As in “ your rig is only as strong as it’s weakest link “. Beef up a part here , and then the others will need beefing up down the line . A 1,000 hp engine with a 4-600 hp flexplate will be the Achilles heel , fix that and then the converter becomes the failure point , beef that up then the trans , and drive shaft & u-joints and then axle shafts and hubs & lug nuts / studs , I’ve even seen guys get EVERYTHING so beefed up and indestructible that the center gets ripped out of the rim ( racing slicks , screws through rim into sidewalls to keep rim from spinning in tire and Waaaaay too much traction on drag strip ) . May need to build a custom braced rear end with welded on gussets like the guys run out here on West coast in the Baja Trophy truck classes even to get all the power safely to the ground. Be careful what you wish for , as one expensive part usually leads to many more on down the line . Thanks for posting this one, and keep on chasing your dreams . One day hopefully you will have that truck all done & hopefully dialed in properly. Oh, one more thing , and please don’t hate on me here , but I’m just NOT that excited about making my truck sound like a jet taking off ……. I love my LB-7 with 4” exhaust with small resonator & 3-1/2” turbo air horn . It has just a bit of “ Whistle “ at wide open , but not enough to piss off all my neighbors. Plus as loud as that 9 blade was in this video I would hate to take it on my 2500 mile round trip visit from Cali to Texas to visit my daughter & grandsons like I can do comfortably in my truck as is . That’s it for now. C-ya 👍👍

[@TruckMaster]

I totally agree the whistle can be overpowering but man it sounds sweet! Also Mark welded the axle tubes but the weak link now is those axle shafts unfortunately

[@stephenmiller5023]

@@TruckMaster Yup , I agree . Or the side gears in differential. I’ve even seen spider gear pins snap or the carrier case crack at pin holes causing all sorts of carnage & mayhem .😏. Just make sure the Best connection on your truck is the one between your brain and right foot .. that’s the one that counts the most . 👍

[@stephenmiller5023]

@@alliebarnett3143 Aaaaaahh , THERE IT IS . The sweet sound of stupid… 😏. Ignorance is bliss . …… I’ll bet you are SUPER HAPPY …. 😆

[@stephenmiller5023]

@@alliebarnett3143 If that’s your take on things , then Sure …. Whatever “ Floats your boat “ 😊😉👍

[@stephenmiller5023]

@@alliebarnett3143 Don’t you have a Prius or a Yugo that needs fixing or something…. Sheesh ….😂. Sorry if my comment to Josh got you all upset as you read it while sitting on the can ….. not my intent there. 😜

[@sebastianturco8534]

Hey is it possible to get the 9 blade turbine on a stock lly turbo? Do they make drop in turbo wheels?

[@seabee73]

I painted my RDS the same color red

[@TruckMaster]

It’s a good color choice

[@braydensteger9392]

Is that an aftermarket exhaust I see on the l5p🤔

[@TruckMaster]

It’s a tip

[@robertlugo3736]

Where’s Ryan hat?

[@TruckMaster]

😂

[@shanemfsherwood8466]

Josh do you ship the air dog fuel systems or do they come from distributor.

[@Demming7]

Id run a Goerend K in my opinion. I run a J personally

[@timmothyshad1137]

I’ve been doing testing on 9 blade turbines here at Blow Hard Diesel on cummins trucks and I just can’t seem to find the right blade pitch 😂 oh well I’ll get there eventually. DO NOT RUSH A HIGH HORSE POWER BUILD! Keep up the content good job.

[@TruckMaster]

Thanks Tim

[@Llyduramax]

You need to put a 9blade in the red lbz

[@TruckMaster]

Ryan was just asking me 😂

[@Llyduramax]

@@TruckMaster yeah but now it’s a requirement 😂

[@johnhallock2713]

I cracked mine without built Trans and no where near 1000 hp and dis so in like 10 places all around the bolts and between bolts and the holes in middle of it & oddly enough Trans still good but I never do anything unless the converter in locked every single time I get on it but I think it's got shift kit and more line pressure but that's it as far as I know but I may be wrong anyhow...

[@ryanvaclavik7205]

We need a diesel dually on the channel tbh

[@TruckMaster]

Yes!

[@ericsalazar2337]

Hey I don’t know if it was just a good marketing ploy but I seen gayle banks do a video about the flat diff covers and it looked like it really degraded your oil making it really bubbly

[@markbremmer8642]

There's the Earl way: cut wires and but connectors, and the right way: re-pin the harness.

[@TruckMaster]

😂

[@demarcosmalls8966]

I have a 10-blade aftermarket 64MM turbo on my LML, but that 9-blade is wicked and SOLD! When is it available?

[@TruckMaster]

Call there company and tell them to use my truckmaster code when you decide to by a turbo it will save you some coin 👍

[@amosstoltzfus687]

I see ur l5p doesn’t have the stock tail pipe anymore. 😮😮😮😮😮What tunes are u running?

[@A2ZREY]

I have a 2004 duramax 4x4 and it’s stock very healthy engine but I’m having a issues with the the transmission popping out of gear ⚙️ p0746 p0735 p0734 anyone know what could cause this I pulled the valve body today and testing solenoids and cleaning up valve body. If anyone knows about it fixed to this issue, I would appreciate it and if it needs to be rebuilt, what’s a good budget rebuild kit they can hold a level five tune because after I figure out the transmission. I would like to get a little bit more power out of it. I tall a lot with this, and I feel like a two and would help with the towing.

[@TheBradd88]

Who do I talk to to buy this turbo? Thanks brother

[@qdmax11]

I’m wanting to know what the fuel mileage on hwy is with the 9 blade Yeah man build her right!

[@michaelduran7147]

I cracked mine and it sounded like a rod knock...scared the hell out of me...

[@TruckMaster]

It’s probably a noise you will never forget 😂

[@michaelduran7147]

Hell no!! I know diesels knock, but that was downright scary...lmao...it was more of a clack clack, not a knock, knock ..haha

[@beaches2mountains230]

THIS IS WHY ALL THE HONDA GUYS, CHEVY SMALL BLOCK AND FORD SMALL BLOCK GUYS KNOW WHATS UP. THEY CAN BUILD A BADASS, FAST SETUP SIMPLY AND WITHOUT BREAKING THE BANK DONT GET ME WRONG I LOVE PERFORMANCE TUNED ANYTHING AMD EVERYTHING BUT THESE DIESEL HOGS ARE EXPENSIVE TO RUN AND MODIFY.

[@beardedguardian71]

Hey now, be easy on Earl

[@stevie9361]

Rome wasn't built in a day because they didn't have heavy machinery. Look how quick Rome comes up now ;)

[@Llyduramax]

Needs a bigger hair dryer

[@TruckMaster]

😂

[@Higherlimit225]

Can I get a shoutout

[@TruckMaster]

What’s up!

[@Higherlimit225]

@@TruckMaster I’ve been watching you’re channel sense ur lbz was black ur the reason I got a lbz. I’ve really took a toll on KZbin I’ve really been getting into it heavy and only 2 people has inspired me to do so. You and victory outdoors. I’m really trying just need a booster then hopefully we can make a couple videos together bc Ik how how to work on trucks and everything I just need a KZbin friend. I’ll should you out as well

[@kevinboyd3543]

Man it must be nice to snap your fingers and get skipped right to the front of the list I was on mark's list before you ever bought the wife Max and you've done had 2 builds done on it WTF when's he gonna call me???????????????

[@TruckMaster]

This was planned months ago but dude! He’s just one guy that’s what make this company unique it’s not a big warehouse with multiple builders if you are impatient then find another builder that can get you fixed up. No hate just trying to explain from the inside looking out.

[@Bowtieguy_Finn]

What happened to your instagram??

[@TruckMaster]

It was deleted unfortunately

[@Bowtieguy_Finn]

@@TruckMaster dang man, it seems like they only mess with the people that are actually doing something with there life

[@justinschooler6243]

Slacking on the videos lol

[@TruckMaster]

Your right 😂 life’s been busy lately hopefully I can get back to it more