FOUR sights in ONE?! | CBE Engage Hybrid 3 Pin

[@Maritime2020Outdoors]

I got the same sight a few weeks ago for my Elite KURE. Its amazing for me. I set my pins at 20 30 40 for hunting so i dont have to fool around with ranging the deers every move and trying to fool around with a sight tape. When it comes to the slider part of the sight, i use my top pin for all ranges. Was shooting the white goat at 100 yards last night with it actually. Low light and shooting at that distance i wont tell how my groups were, but i did hit the target every time haha.

[@06fireball]

Just ordered one for my 16 year old to go on his elite.. He shoots local an state competitions up to 65 yards.. He currently has a tru glow range rover with a 8X Lens with a clarifyer peep We need someone now for speed... Fixed pins an will hold a lens... He will be traveling to the Buckmaster 3-D pop up tournament in august. We are excited to get this thing bolted on an start shooting.. Thanks for sharing Keep up the great work Followed!

[@macbarb12]

I just got this site I’m super excited about it. You should do a video on setting up first second and third access with this specific site, and also setting up this particular site in general

[@stickboy6772]

great video as always, although 4 sights in 1 is pushing it. 🙂 something worth mentioning is how well this adapts from L-R/R-L that it is nearly ambidextrous. My first CBE sight because i have been waiting over 35 years for a TRUE micro-adjustable set of pins. Bought the LH version due to a great deal and after examing it I am about to mount it on my RH bow today and start the sight-in process. Great videos sir.

[@josephtreadlightly5686]

The Prime bows have a threaded hole @ the very bottom of the riser. U put an AAE Gripper into the threaded hole & mount your backward facing stabilizer to the Gripper

[@averagejackarchery]

Yes, the Kure has one mount hole and the Rezult has two. Any offset bracket, including the Gripper, will work.

[@chrisroman5631]

Definitely should do a setup video. realistically how far can you get out with the sight tapes that are included. Its exactly what im looking for in a sight. Looking to start in the ibo bowhunter and shoot Tac events.

[@josephtreadlightly5686]

I use a 1/4" since the inside of your peep & the outside ring of your sight don't have to line up. Your brain will center the sight which is smaller in your line of sight compared to your peep. Kind of the same way your brain will give u better accuracy with a EZV sight when it comes to not having as many stray arrows going left or right.

[@knightingalesaid]

I like that versatality very much. Thanks for the vid.

[@judefuselier]

Seems like a heavy cantilever also, subsequently requiring a back bar, adding a greater weight feeling. Seems like something nice for 3D!

[@averagejackarchery]

I'm loving it for 3D!!!

[@josephtreadlightly5686]

@@averagejackarchery Does the Elite bow h

[@josephtreadlightly5686]

Does the Elite bow have a hookup on the bottom where u can mount a Gripper to & just put the bottom stabilzer into the Gripper?

[@averagejackarchery]

@@josephtreadlightly5686 You will need an offset mount of some kind to install a backbar on any bow.

[@gcow8328]

Ibo only allows 3 pins, but let's you use a slider?

[@ViewIndepth]

Left and right locking adjustment comes loose, only 4 mounting points on dovetail, pins fiberoptics dont get enough light exposure, level bubble is part of the sight ring(and not inside the sight ring, very bad placement) yardage indicator cannot be set all along the slider, not enough mounting points. Individual pins “micro adjustment” is numb feeling and difficult to measure how much movement you are adding to pins position(lack of score marks). Had one other CBE sight before this one (TL7) and was a little better but also disappointing. Left and right would walk and wife had to pain the sight ring fluorescent orange to make it consistent for locating in peep. The metal sight tapes are REALLY nice tho.

[@noobnaab4647]

Awsome review! will have it in consideration when i buy another sight , i hunt on pitch black night , my only fear is that transparent plastic on top , when you light yhe pins with the led it will glow like a cristmas tree , but can always paint it or put black tape on it!

[@judefuselier]

I saw the trophy ridge hot wire 3 pin, 2 fixed with one slider. I don't know about this CBE sight, also I'm interested in the tactic hybrid.

[@justinjones3839]

Bro idk if u mentioned it or not but u could take the pins out and put a lense with a redical in it and it would be like 5 sights in one

[@averagejackarchery]

Have you yourself done it? Be curious. I have yet to meet someone who has taken the pins out of that sight successfully. They are built like tanks and all the micro adjustable pieces of the blade pins are like brain surgery to get apart.

[@justinjones3839]

@@averagejackarchery lol I haven’t done it I don’t want to I’m scared to mess it up lol and I just ordered mine still waiting on it to get here but it was just a thought of possible ways to use it lol

[@justinjones3839]

@@averagejackarchery I do plan on getting a lens tho

[@djsjunction]

Love my CBE!

[@maiabrittany]

Hi Jack, do you still use this sight? I'm considering picking one up for hunting and 3D, for my incoming Athens Vista 33.

[@averagejackarchery]

You bet I do! Built like a tank and has all the functions I demand out of a high end sight system. It's my go to for competitive 3D especially or situations where I need a slider in conjunction with 3 pins. I.e. something long distance like a TAC event.

[@mushandsnowman2908]

good review thank you ....just ordered Mathews V3 wife ...ordered Mathews prima...serious would you recommend this sight

[@jamiehockly1926]

Hello, great video. Can you tell me can I put an Ultraview UV3 Hunting sight on this dovetail as on the Ultraview website it says the Engage Hybrid is not compatible?

[@averagejackarchery]

Their website is correct.

[@jamiehockly1926]

@@averagejackarchery thanks for the update.

[@guppy1911]

What is that sight made out of? I’ve been looking into getting it for a good bit. End of this year I’m changing sights, arrows, stabilizers on my triax.

[@averagejackarchery]

All metal construction. Aluminum and steel components. Has some heft to it no doubt.

[@BeardedSportsman]

Interested in this sight but not sure if it will work with my bow. I shoot 510gn arrows at 60# with about 260fps. I currently run a Fast Eddie XL with sight tape 10 (spot hogg tapes). Anyone know if this would work with my bow or am I too slow?

[@roryrohrer7640]

If you are certain your at 260fps, I don't think you would have a problem with this sight matching your setups speed you just might not be able to dial down to 100 yards you might max out at 80 or 90.

[@BeardedSportsman]

@@roryrohrer7640 I bought this sight and it works flawlessly. Using tape 13 from CBE. I run low profile vanes on micro diameter arrows so I have JUST enough clearance to dial down to 100 lol

[@roryrohrer7640]

@@BeardedSportsman good deal!, I'm picking up my mathews v3x 33 on Thursday and bought this same sight and can't wait to get my hands on it. This will my first dove tail sight its sounds like I won't be disappointed.

[@BeardedSportsman]

@@roryrohrer7640 I’m buying an Elite Enkore soon and already have the same sight on order lol

[@GrizzAxxemann]

Damn.. that sight costs almost as much as my bow.

[@averagejackarchery]

Definitely not cheap! But also definitely not cheaply built.

[@GrizzAxxemann]

@@averagejackarchery my next bow is going to have the Burris Oracle on it. Sure, it'll be close to $3500CAD for the full rig, and won't make me any better at killing deer, but why the hell not, eh?

[@gcnphilly]

Have the CBE Engage Hybrid single pin and love it. Looking at a 3 pin for hunting and possibly hunter class target shooting. Any insights after having the sight for a year? Still enjoy it? Also, any concerns with using a dovetail sight for hunting? Often hear that having that longer extension adds to potential woes while hunting from an elevated position.

[@averagejackarchery]

Absolutely still love it. Shoot it every day on my target rig. Took it out yesterday for my first unknown 3D shoot in almost a year and it was fantastic. Killed all my deer with it last year too on my hunting bow. Zero complaints other than the weight. But, duh. It's an all metal, high quality sight. I shoot with it on a middle hole and it's nowhere near overextended or longer than any standard mount sight. Never had an issue with the dovetail mount while hunting. It'll still be one my bows for many years to come.

[@gcnphilly]

@@averagejackarchery Thanks. Can’t wait until mine arrives later this week!!

[@sinepari9160]

Just ensure you move your dovetail in/out to line up your tapes perfectly.. I keep mine on 3 (1/4) which keeps my tapes perfect on 'my' bow.. yours might be different. i see average jack is on 2 but it really matters with your riser/bow geometry.

[@jeff_8789]

Hey nate u happen to know if its possible to remove one those pins outta the housing im interested in this sight but want my 20 stationary and the 30 my slider i want the sight picture clean as possible have shot 1 pin forever but I want that 20 and 30 always there then if I have the time I could move it for anything further

[@averagejackarchery]

These pins on on a blade system. Makes them built like a tank. But no removable. However, you can still run the 3 spin, lower the bottom pin completely out of the way, sight in 20, sight in 2nd pin for 30, and then adjust the slider set for the 30 pin and BAM. You have a 30 that's a slider.

[@jeff_8789]

@@averagejackarcheryim gonna check into cpl other slider models and do some more research if it would go down far enough to where its not buggering up my housing view it'd probably do the trick also that's the best suggestion I've heard so far another fella said if its not removable just take my plasma cutter and buzz it off there that's the kind of advice my local shop provides lol Thanks alot for replying I greatly appreciate it I've learned to do pretty much everything myself now from binge watching ur videos so keep up the awesome content u and the ranch fairy have both been an abundance of knowledge for me...

[@daniel.espinotx]

Does anyone have any experience with a CBE 3 pin tactic hybrid? Is it micro adjustable? It’s more in budget than this sight.

[@devenstone3426]

Can u explain where to get this Custom site bracket to be able to fit the ultra view 2 scope on this site. That’s my main goal with this and I’ve been on the phone with a CBE tech and he said he didn’t see how the ultra view 2 scope would attach to this sight.

[@averagejackarchery]

The whole front of the sight mount has to be removed to just give you the bar and respective axis'. Then, you have to get the target scope mounting block that will fit the CBE bar. I imagine, although not tested, that this will be a pretty universal fit, although a CBE block with be the most likely culprit.

[@HUKIT.]

@@averagejackarchery Yes sir I’m confused as Ultraviews website state it’s not compatible with the Engage. I also have a CBE Elevate that came with additional parts(using VTX scope) and I can’t figure out a way for the swap either?

[@ericleong1453]

Great video ! May I know the whole body is aluminium?

[@averagejackarchery]

Yes.

[@johnheitkamp4792]

Great video, i run the cbe teck hybrid, have 598 grain arrow and can get out to 90 yards with bottom pin as my slider, do you think that sounds about right?

[@averagejackarchery]

I guess!!!

[@808kahulaa]

Where is the sight made? I can’t find “made in USA” I’m thinking it’s Chinese

[@averagejackarchery]

The Tactic Hybrid is made in the TOG plant in Henrietta, NY.

[@flipsyde8897]

Can you range out to over 100 with this sight? Just want the ability to practice further out than 75 yards

[@averagejackarchery]

The tape definitely goes to 100. It's all if your bow can push out the speeds to reach it with ample sight housing clearance.

[@flipsyde8897]

Average Jack Archery I just picked up a Vertix, so hope it can hit that range! I’ll find out soon! Thank you for all of your videos. Very helpful for new archers.

[@DrToe]

Can you change that green ring on the scope?

[@averagejackarchery]

You can simple remove with the two screws and paint with plastic specific paint any color you want.

[@DrToe]

@@averagejackarchery omg super neon 90s pink here I come

[@gilbertlongboat5081]

Can I buy the 3 pin scope housing, I have the 5 pin right now and wondering if I can buy the other scopes for it ?

[@averagejackarchery]

Housing removal is a snap, however I don't know if CBE will just sell you the 3 pin or single pin housing alone. But it doesn't hurt to ask!

[@gilbertlongboat5081]

@@averagejackarchery do you know what other scopes can fit on this sight ?

[@kolt3273]

I'm trying to decide on a sight for my new bow thats coming in. I have it narrowed down to this sight in a 5 pin, and the spot hogg fast eddie xl 5 pin. Which would you choose between the two? Thanks

[@averagejackarchery]

I've never used the Spot Hogg line, but I know a lot of folks that rave about them. I personally can say that the CBE hasn't given me a reason to ever want to leave it! I'll be sticking with that sight for a looooong time.

[@kolt3273]

@@averagejackarchery Thanks for the reply! I may be giving the CBE a shot simply because of the micro adjust pins.

[@wadebailey5947]

Does it have a travel stop?

[@averagejackarchery]

It doesn't have a positive travel stop, no.

[@generoush3823]

I shot traditional left handed for years because Im left eye dominant. Am planning to switch to compound because of physical reasons. Do I need to stick with left hand shooting because of my dominant eye or does it make a difference for compound?

[@averagejackarchery]

If you shot left handed and are comfortable that way, don't change it! If you want to switch it up though there's nothing wrong about that either. But I would stick with what is comfortable already.

[@generoush3823]

@@averagejackarchery Thanks, i didnt know if it would make a big difference or not.

[@mushandsnowman2908]

PS...its between cbe and REACT® ONE PRO™ - Dovetai

[@averagejackarchery]

Yes, I'd definitely go with the CBE!

[@mushandsnowman2908]

@@averagejackarchery done thank you

[@ILhunter23]

Just bought this sight and I’m having trouble sighting it in. I am using the 3 pin and would like to have my pins centered in the housing. I used my last pin as a floater and marked at 30 and 60 yards and got my gap. Then I matched it with the sight tape gage. Got #11. When I slapped the sight tape on the arrow did not match with the 60 yard mark and then had to bottom pretty much all my pins down. What am I doing wrong?

[@averagejackarchery]

Sight tapes only work off the speed calculating down. Meaning the gaps from 20-30-40-etc. Meaning you have to find the speeds for your top pin only, based on how it would work as a slider. Then, you sight in your bottom pin for 40. Now you can use the 40 as a slider and find what sight tape works for the 40-50-60-etc gaps, and use THAT tape. Mode the pin indicator down to 40, and boom, you're all set.

[@evandromuller9049]

Arco legal 👍👍

[@stick__shooter]

Cool! But so expensive! Not for me, at this point anyways.

[@doncaruso1949]

Give up on the EZV

[@GrizzAxxemann]

Why?

[@averagejackarchery]

Nope! But can't use it for 3D in IBO. Must use a pin sight system.

[@GrizzAxxemann]

@@averagejackarchery can you use a single pin for hunter class or is it 3 pin only?

[@averagejackarchery]

@@GrizzAxxemann Depends on the sanction of the shoot. True IBO or ASA Hunter division requires a fixed pin sight. Can't adjust it onxe you enter the course.

[@GrizzAxxemann]

@@averagejackarchery That's bizarre. Everyone I know who bowhunts use single pin sliders. Maybe we're cheating? 😆

[@Bowhunterlake]

You loook very young here

[@averagejackarchery]

I've aged like 2% milk.

[@blueheron69]

Wow. What a change! I always loved “Average Jack Archery” because it was from an “average” type perspective....the average family guy who bowhunts and enjoys archery. Now I see sponsorship shirts, hats, color matching, expensive name brand advertising based on the sponsorship, etc. Its no longer “average jack”, loosing the attraction for the average working, family guy/gal bowhunter out there. AJA always had some of the best reviews and explanations of gear and was attractive based on no brand pushing or agenda based on sponsorships. Looks like that’s history. Consider dropping this sponsorship stuff where you don’t feel obligated to push certain brands and return to what got AJA popular on YT to start with. Just my $0.02.

[@averagejackarchery]

No one pays me a dime to say anything about any products. Not one cent. I'm asked to give my personal opinion of products and review them. If I think something is useless, I don't continue to use it. If I feel something is overpriced for what it is, I stop using it or recommending it. I'll never say "brand x" is the best. Do I enjoy certain things more than others? Absolutely. Just like everyone else. The color matching and whatnot is a by product of finally having nice clothes to wear. Lol. Actually owned that shooter jersey years ago when Rea Wilde was still shooting with Elite. If you don't like the review videos, I'm sorry but they're not going away. If you don't think EVERY KZbin channel with a decent following isn't given free stuff or commission from discount codes in return for free advertising then you're kidding yourself. There isn't a single KZbin channel in the outdoor industry that doesn't work with at least one if not half a dozen companies in return for free video content. I am certainly one of them that reviews and continues to use the products I actually like and recommend to folks in the shop.

[@michaelskipworth6433]

Stop selling just do the review

[@tugadude7311]

Man, its starting to sound a lot like a sales pitch, i enjoyed your channel a lot but if you try to push stuff I’m out

[@averagejackarchery]

I will never push a product on anyone. Did I say it's the best sight ever for everyone? Nope. Just pointed out all the positives of it for a sight in its price point!

[@tugadude7311]

@@averagejackarchery no problem, i understand but keep it independent we like you like that, you got an amazing way of explaining this archery stuff, it is good for people starting in the sport and for the sport in general. There are to many sell outs on youtube so when we see someone like you giving valued advise it is really refreshing

[@BK-qc8rr]

u talk too much

[@j.g.2825]

Please do a sighting in video. Also I have no idea how I would mount a different housing like ultra view to this sight. If you can please explain. Ty for the video. I bought this sight for this season.

[@averagejackarchery]

Check this out! kzbin.info/www/bejne/g5qmfmCXgLGFq8k