CBE Engage Hybrid Sight (5 Pin) | LancasterArchery.com Product Video

[@catchyoulateroutdoors8401]

Great looking sight, exited to try it. JESUS Loves you so so much more than you know !!!!!! GOD Bless

[@hawkhughes8648]

I purchased a lightly used elite omnia with this site an elite qad rest, and elite stabilizer. For 962 after tax. This site he is advertising was 319. When it first released. My elite qad rest was 169 and my stabilizer was like 110. So i think for last years model bow and being lightly use, cause i dont see any scuffes or scratches. 962 was a great deal.

[@markespinosa1211]

Just bought one... CANT WAIT TO SHOOT WITH IT !!! :)

[@user-ej2mx4nw2l]

If I set my 5 pins to 20 to 60 yards get that all dialed in then go attatch the sight tape. When I add the sight tape and move my red arrow to say 44yards. What of the 5 pins do I use to shoot at that target?

[@TheBeardedHen]

Does the sight in the video have .010 or .019 pins?

[@James.712]

Can the dovetail be popped off to get the bow to fit in a case?

[@TripMellow]

Yes

[@titowolf100]

I just ordered this sight but I am confused with how to set home. Since the metal tapes are attached with screws then it means that the distance between the screw and the 30 yds mark on the tape is fixed. Then how can you make the 30 yds on the tape match the 30 yds you did on your white tape when sighting in? It is not like a typical paper tape that you put it where the marks match since you can position them up or down.

[@wd40sykes92]

Titowolf110.... I don't own this sight, but I would think that you first set the fixed pins (20,30,40,50,6-). Once you have all the fixed pins set, you then set the sight tape off of the 20 yard pin (first pin). If setting the sight tape is anything like the Tektarget sight then you will slide the needle until your 20 yard pin is hitting the 30 yard target. Once that is verified you will make a mark on the white tape and then you will find your 60 yard mark. Keep in mind this is all done using the first pin (20 yard pin). Once you have those two marks you find the sight tape that matches. Now with that said, your fix pins will be set.......lets say 20,30,40,50,60. If you then chose to shoot further, or you want to shoot something like 33 yards, you can use the slider which would be based off the first pin (20) yards. I hope this clears things up.

[@trevormacable]

Sight in pins as normal. Then on the slider using your BOTTOM pin once sighted in at whatever yardage 60ie make a mark on white tape. Then walk back into 30yards using the same pin moving on slider. These sights come with a tool match the 30 mark on white tape up with 30 on tool and the 60 mark on tape matches with a number. All cbe sight tapes are numberd so pick the correct matching tape and screw it on.

[@ngyy]

Can the pin be remove

[@vernproksa5902]

Does this scope sight have three axis or just two?

[@yerbeilisready8562]

It has 3rd axis but first is not adjustable.

[@Bush-y9q]

I just got mine hitting 1st pin is hitting good at 20yards 2nd pin is hitting great at 30 yds third pin can’t get it to hit at 40yds I chase the arrows by moving the pin up but my 3rd pin is almost touching the 2nd pin idk what to do

[@gorrila41]

is your 40 pin hitting high?

[@Erikfl348]

Which sight would you use outta this one or the spot Hogg fast eddie xl I can’t decide which would you take out on a hunt or 3D target???

[@btmbowhuntingtv3785]

Erik Flores Get the CBE

[@Erikfl348]

BTM Bowhunting Tv thanks and I did get it

[@kingsproductions9760]

@@Erikfl348 how are you liking it? And why did you end up deciding for the cbe? I'm considering both of these as well

[@Erikfl348]

I switched to the spot Hogg fast eddie double pin.. cbe is awesome man there’s nothing wrong with it just maybe re tightening the adjustments every now and then

[@Erikfl348]

miguel reyes hello

[@yerbeilisready8562]

Where the hell do you get the batteries? Having trouble finding them, does anybody gabe a link?

[@mitchbender7466]

RD Osborne does it say what type it is on the battery

[@davidjames4914]

First comment