Fox 36 Factory Grip 2 Setup | Suspension Bracketing | Suspension Setup

  Рет қаралды 1,818

Mike Paquette

Mike Paquette

Күн бұрын

Пікірлер: 21
@johnnywallace8123
@johnnywallace8123 11 ай бұрын
Nice and informative Mike. I am sure that you are going to love the fork. Looking forward to some new and improved trail riding videos.
@toml7945
@toml7945 11 ай бұрын
Nice, may be my next fork. I am still using the rockshox 35 gold, I have 2 of them and they are working for me but always have an eye out for the next upgrade. Thanks for the video! I hear the brake noise, lol. I am currently dealing with noise from the rear brake as the pads and rotor became contaminated when i did a full bleed, my fault, lol
@mikemtbs
@mikemtbs 11 ай бұрын
The 36 is on sale for 495$ online at planet cyclery. That's where I got mine from. Makes the bike feel and react so much better. Definitely something to consider for sure. Thanks for watching the video and hope you have a great day!
@toml7945
@toml7945 11 ай бұрын
@@mikemtbs Thank you, I'll check that out, have a great day!
@Emtbtoday
@Emtbtoday 8 ай бұрын
Great video, very enjoyable to watch! I just got a new bike, the AT2024, my first bike since getting back into biking. I went all out and got everything I wanted. However, it came with the Fit 4 Damper on the Fox 38s, 170mm LSR top and bottom, with the 3-switch compression (fully open, medium, and closed). It's quite stiff, but I've been riding shocks all my life until an accident, and to be honest, I'm very impressed with how the Fit 4 Damper is tuned! I will be looking to get the new X or X2 Damper at some point, though. I think it's good enough for what I need it to do right now! There's still a lot of adjustment in the Fit 4; it's quite impressive. My friend at the track has the Grip 2 Damper, and he's always getting that set up, same with the Float X. I might swap mine for an X2, but it's a brand-new bike. I've already gotten rid of the carbon bars and 50mm stem in favor of a 35mm Burgtec high-rise 38s. It feels a lot better! Already I think the low 25mm bars I was to far over the front on them feels made for the bikenthese burgtec bars so given these ago this summer and see what's next!
@mikemtbs
@mikemtbs 8 ай бұрын
The fit4 damper is great! I hope you enjoy your new bike!!!
@Mtb_andrew18
@Mtb_andrew18 13 күн бұрын
Which trail is that in gunpowder
@mikemtbs
@mikemtbs 12 күн бұрын
It’s the lookout trail on the south side of the park.
@mikemtbs
@mikemtbs 12 күн бұрын
Also known as the quarry trail
@Mtb_andrew18
@Mtb_andrew18 12 күн бұрын
@@mikemtbs ohh I ridden it before. I take the jump line down most the time I went down that trail once
@XqDezzy10
@XqDezzy10 5 ай бұрын
nice video and nice bike!!! how much do you weight? and do you have some token inside? thanks.
@mikemtbs
@mikemtbs 5 ай бұрын
Hi thanks so much! I'm about 170lbs and had 1 token installed
@XqDezzy10
@XqDezzy10 5 ай бұрын
@@mikemtbs make sense.... i'm 160lbs and working on set the same fork (F36 factory 2021 vvc) @ 160mm travel , and i agree with you about lsr ( i read online that increase lsr increase compression, so the trick for less harsh feeling is to use lsr as open as you can) , so i'm : 75/77 psi , one token, lsr 12 / hsr 5 / lsc 12 / hsc fully open or just one clik from wide open. This is where i landed for the moment... not sure it's perfect yet I even tryed lsr all open and compensate a bit with more lsc....and seems to work... very less harsh feeling on the small/medium chatter
@mikemtbs
@mikemtbs 5 ай бұрын
@XqDezzy10 very cool. It's nice to have all the options to really fine tune the ride. Enjoy your fork!!
@XqDezzy10
@XqDezzy10 5 ай бұрын
@@mikemtbs just the last things, do you remains on the last setting posted in the video or, because the video is 6mth old, you have done some others changes?
@mikemtbs
@mikemtbs 5 ай бұрын
@XqDezzy10 I've changed a bunch then went back to those settings
@marzocchidj3
@marzocchidj3 2 ай бұрын
What was the outside temperature during the test?
@mikemtbs
@mikemtbs Ай бұрын
40 degrees f. I know pressure drops w temperature. So I’d imagine if it was hotter I’d add have a few more psi
@marzocchidj3
@marzocchidj3 Ай бұрын
@@mikemtbs Yes, but I was curious about the temperature cause on a grip 3 pos Performance fork I struggled to hav good traction ans smooth work under 5 degress Celsius, 40F is 4.4C degrees, so quite "cold" and judging by the video it worked quite well. I sold my fork a couple days ago and bough a brand new 2023 160 Fox 36 with Grip2, very keen on trying it out :) We have similiar temperatures nowadays in Hungary.
@mikemtbs
@mikemtbs Ай бұрын
@marzocchidj3 ok very cool… literally. I felt like I had very good traction when using the fork. Try not to go above 20% sag and the fork works best
@KillGates-s3r
@KillGates-s3r 7 ай бұрын
Golden bike, nice but gold is heavy...
2025 Fox 36 & 38 Explained | GRIP X2 & GRIP X Dampers
18:30
The Lost Co.
Рет қаралды 68 М.
MTB Suspension 101 - Forkin Eh! -Factory Fox 36 Grip 2
16:01
Garage 31
Рет қаралды 6 М.
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН
Avoid these Fox 38 Setup Mistakes
9:00
Otter MTB Tech
Рет қаралды 41 М.
Fox 36 GRIP2 Beginners Guide Setup
9:14
Otter MTB Tech
Рет қаралды 41 М.
Fox GRIP2 Setup Guide & Benefits
28:15
The Lost Co.
Рет қаралды 407 М.
Fox Kabolt X Axle Install | MTB Nightmare | Stolen Bike
7:28
Mike Paquette
Рет қаралды 942
How to adjust a Fox 36 Grip 2, & WHY I have a black box on my fork!
8:32
Jeff Kendall-Weed
Рет қаралды 102 М.