FOXBODY GROUND CONTROL | STRANGE COILOVER KIT INSTALL

Let's install some coilovers! These are the 150lb strange coilovers and they are breeze to install!
#COILOVERKIT #FOXBODY #STRANGE
LINK TO COILOVERS lmr.com/item/S...
WANT BREW2L DECALS? www.shopbrew2l...
LINK TO SHIRTS: / @brew2lfoxbody
SUPPORT THE CHANNEL BY USING THIS LINK ANYTIME YOU NEED ANYTHING FROM LMR👇
LINK TO LMR HOMEPAGE latemodelres.t...
You can order all your Amazon needs through this link while supporting the channel amzn.to/2KvzVEl
INSTAGRAM / brew2l
BREW2L MUSIC: Music For Gear Heads open.spotify.c....

[@Gerardo.hernandez]

Like the hair cut.

[@FoxcastMedia]

upgrades FTW!!!!! Calypso making big moves!

[@timsimons8946]

First time installing this kit. Learning as I go. How does this work with the current spring setup if you have lowering springs. I'm just trying to adjust a little lower.

[@mustangmike4078]

I'm always impressed with the editing on these videos. I suspect it takes a minute to make them when all is said and done. Definitely my favorite fox channel.

[@BREW2LFOXBODY]

Thanks mike! Yeah it takes a couple of hours at least for each video including the thumbnail.

[@paulhammond3488onetime]

Dude love your garage set up. Real nice and you keep it clean.....👍👍👍

[@mikedambowic5862]

A great vid and nice kit! Thanks BBREW2L👍👍

[@lochnessfox3441]

Thank you brew2l. That’s a great option for adjustable ride height. Awesome !!!!

[@nikkodnp]

Nice music choice for this cold weather

[@DBMD7]

Good video. Simple straightforward install. Nice

[@leehuffman8659]

@Brew2L I see you put strange coilover kit on the front what suspension is on the back of this car. Want my coupe to sit the same way any advice I would appreciate it.

[@NexGenCarGuys]

Need some of these.. im having to run a k-member spacer to get the 3valve in my fox. Got a few new videos up. Got my valve covers and timing cover powder coated its starting to come together... another awesome video.!!

[@VidTubeWatch]

A job well done. I have the Function and Form Type 2's on my car. I need to make some adjustments. Lovin the new shop.

[@BREW2LFOXBODY]

Thanks brother! I’m definitely enjoying it.

[@joncalon6014]

Yes! Awesome content always wondered what your opinion was on coilovers

[@jameyrichardson8967]

Congrats I love mine have them on all 4 corners

[@RegularGuyGarage]

Got the same struts and then UPR coil Over kit which I think has Viking springs. Well worth the money 👌👌

[@allenjay5907]

Which coils did you get with your kit ??

[@RegularGuyGarage]

@@allenjay5907 Viking

[@allenjay5907]

@@RegularGuyGarage what weight ?

[@RegularGuyGarage]

@@allenjay5907 150lbs.

[@allenjay5907]

@@RegularGuyGarage damn I got 12” 250s 😑

[@4eyefox]

Looks good, I have strange 12inch 200lbs spring and single adjustable for coilovers. I had to use spanner wrenches to thread mine. It was a massive pain, glad yours was easier.

[@1skorpius]

Thanks for the video I was looking at this same exact coil overs kit but couldn’t decide if I wanted them but with your video I bit the bullet and got the strange coil overs 200lbs and it worked with your code! Thanks again

[@KingRob]

What size spacers did you use?

[@BIGDMEDIA]

Looks Good Man!!

[@doctormustang3166]

Review in ride comfort would be apreciated

[@BREW2LFOXBODY]

Will do 👌

[@stephenroberts7816]

That is a great upgrade! Good stuff as always!

[@Route5Garage_5.0tbrd88]

I discovered graphite spray lube when I worked at a JD dealership for 10 years. Stuff is great. I recently sprayed it on spherical rod ends on my CHE control arms to quiet them down.

[@BREW2LFOXBODY]

That stuff is amazing!

[@youngladd3281]

That's just about how I like my ground height to. Just enough to give me enough clearance to protect my exhaust. Ultimately it keeps your bottom exhaust from scraping and pulling on the headers, which eventually cause's header leak's.

[@NoFox_Given]

I have the same setup, strange struts with the strange coil over kit. It’s been on my car 3/4 years now worked out awesome.

[@briandubbeld5665]

I appreciate your channel 👏👏👏👏👏👏👏👏👏👏👏 you look so tired dude are you getting enough rest? Man don't work to death I do love your Chanel fox body's first gen mustang and the Lightning so many cool cars and all your family working with you so cool keep up the great work I don't overwork yourself 👍👍👍👍👍👍👍👍👍👍👍👍👍

[@BREW2LFOXBODY]

I appreciate that brother! Yeah me and sleep don’t get along sometimes... obviously 😂

[@moneypitmustangbrian3934]

You know things are gettin serious when the dial caliper comes out!

[@VernonCrumpSr]

Lol

[@cambossy]

Looks killer

[@FORDMAT77]

Good afternoon BREW2L

[@BREW2LFOXBODY]

Afternoon 😎

[@thefoxchamber]

I thought about getting those. Just might now since there not hard to install.

[@roccosvan]

Go for it! Get some adjustable rear spring perches while you're at it.

[@jasoncameron34]

Looks awesome great video on how to install coilovers

[@trent12363]

I have a more stance setup, scale coilovers all around with 8" 550 lb front springs... More foxbodies need coilovers, they are a great upgrade.

[@gdavis2k2]

how does that setup feel does the car drive better...redoing my suspension and just looking at different thoughts on spring weight

[@woundedfox5109]

No no no, Thank you,and thankS to LMR.

[@Frankie4231]

Any issues with brake line clearance ?

[@chriswalsh7582]

Car looks amazing! Damn I might sell one of my Shelbys for a four eye Fox.

[@6spd85notch]

Do you have any lmr discount codes?

[@turbo5.061]

How did you put that front swaybar on with the on 3 turbo kit had to remove my bar will not fit with the turbo piping

[@johnford5846]

Hey BrewtL I know this might be random but I’ve heard through the grape vine that some folks would love to hear/see a video on how the vacuum/sensor/inner workings on the 86-93 fox body’s flow.I apologize in advance if I/we missed this in the past.Be safe,God bless🙏

[@TheModAddict]

"And possibly Dent your face" lmao

[@BREW2LFOXBODY]

😎😂

[@iammalloy]

Can you not rotate that pipe so its not facing at an upward angle? ( Im sure thats a dumb question lol)

[@BREW2LFOXBODY]

It chatters really bad if I do that. I just need a new one.

[@BmoreFox]

What is the code for LMR?

[@BREW2LFOXBODY]

BREW2LDEC until the 19th

[@bobfalfa76]

Completely off subject, but what lipo charger do you use for your RC cars? Im buying an XMaxx, using SMC lipos but have no idea on a charger, traxxas ones are expensive.

[@cyclonekevin6199]

Those discount codes come in handy.

[@sav22rem22]

Which subframe connectors did you use on the calypso?

[@jasonhastings5538]

Any upgrades for the brakes for up coming videos?

[@NorthRacing]

What spring rate did you get? I got that same set with front and backs 120lb and 220s from a buddy when he sold his car. They are bran new but not sure what rate ill need or if i should use these ones

[@automotiveaddiction428]

? My exaust comes straight out the back of my car.i put a body kit on and now need to have my exaust point down...does the exaust now stink up the inside of my car or still the same ?

[@graigorygilbert602]

I did coil overs on all 4 corners and it took me a bit to get the car leveled out. I drove it it and let the suspension go through the cycles and readjust.

[@ferdinandcuevas8457]

Have you ever tried to use loctite or permatex anti seizure compound it's silver on color and it gives you a cleaner look.

[@BREW2LFOXBODY]

Yes of course... I just like this stuff better 👌

[@jeffryglasgow1662]

Wish I would have known about the discount code before ordering $1500 worth of LMR restoration parts.

[@jasonv1144]

What's your trick flow cam timing at? I'm having a hard time from keeping mine from stalling after revving. Only way I stopped it was bumped idle to 1100 rpm. I'm at base timing of 10 with cam advanced 4. Was told to bump it up 4 degrees. Should help with issue. Any thoughts? Thanks

[@jneman91]

I'm having an issue with the coil over hosting the brake line bracket on the driver side. Is this common? I do not have full turning radius when turning right.

[@jess6972]

Notice you didn't use the stock compression bumper sits at the bottom I don't have one either but says use it. Is it necessary?

[@GearHead704]

Seems like about 5,000 people always watch these videos before me LOL

[@Robx5.0]

I had a UPR k-member kit with tubular a-arms on my notch. I didn't like the popping and clinging it had. Do you have the same noise on this setup?

[@cjeffcoat2]

Hey man at the very beginning of your video you mentioned that something was stuck open and you were going to have to test your grinding skills, not being able to see what you were pointing to, what was stuck open?

[@gregoryfrost960]

What spring length and lbs did you go with. Thanks

[@krismatthews8533]

Do you reuse the factory upper shock rubbers when you reinstall the shocks with the coilovers in the rear

[@griffinsexperience7594]

Great video getting to do this too my fox. You make it look nice an easy, definitely makes me feel more confident in doing it. Do you have a lmr coupon code? Thanks for the video!

[@93coyote65]

What spring rate and length you get? Also what caster camber kit you run?

[@BREW2LFOXBODY]

12” 150lb I’m running the sve plates.

[@jolu7019]

Great video. Great front stance now Will this work on an 86 SVO the factory height is way too high. Would like to this upgrade. Thanks for the video

[@jimcorman5842]

Nive vid,thanks . Question what is your rear tire & rim sizes with back spacing. Thanks Jim

[@automotiveaddiction428]

Does the rearend from the 65 fit the foxbody?

[@jaydollar140]

Nice bro ! How is the ride versus the cut stock springs? What struts are you running?

[@1978TransAmOwner]

Did you run a spacer like that one on the top of the caster camber plate ?

[@richcarotenuto4849]

Do you need a spanner wrench for these or can you lock the adjusting by hand ?

[@benjilewis3782]

Know anyone with a fox, notch or hatch for sale in decent shape?

[@schwifty9038]

i know this is an old video, but what weight springs did you go with?

[@antiricergt]

Question 🙋‍♂️. I got the UPR coilovers & ordered that spray graphite that you used. I have no idea what this stuff is suppose to do lol. Does it keep the threads from messing up? Or something?

[@dawsonbass7056]

How close to stock weight is the front end would you say?

[@jeffparis8318]

On your front coil overs, what length and rating did you go with for a nice comfortable ride up front?

[@vernondavis2207]

Great vids bro and the comedy swipes at Hunter are hilarious . Having an issue with rear shocks bottoming out and rupturing1987 LX Coupe 3200 lbs .Qa110 coil overs with Strange 10 way adj.s00006 I believe.Also have blown Lakewood 50/50s as well. Any clues or suggestions? The shocks seem to bottom out on big dips in the road causing seals to puncture.Any help greatly appreciated.

[@hyde302r6]

What are u using to lower the rear

[@BREW2LFOXBODY]

Factory cut springs. About 1 coil cut off

[@mustangsquad3029]

You should have put “electric powered” when you where pushing out the 65 😂

[@BREW2LFOXBODY]

I thought about doing something like that... then forgot 😂👌

[@TanCalHan]

Where do we find the code to use at LMR?

[@BREW2LFOXBODY]

Right now the code is BREW2LDEC

[@mustangboy8889]

What pound springs did you go with?

[@BREW2LFOXBODY]

12” 150lb

[@mustangboy8889]

@@BREW2LFOXBODY I think thats the spring I'm gonna go with myself, I think it's a good spring for what I'm wanting to do with my car.

[@johnz5359]

How does the ride feel?