This tool is not available in the store. An idea that will be appreciated!

[@thepagan5432]

Burnishing tools are readily available. Even pressing a precision ball bearring through a machined bore does the trick. Mollart, Triumph and Cogsdill are 3 of the companies marketing burnishers. I've used burnishing tools for many years.

[@BeeNee285]

I'm not a machinist but have been around a shop or 2. I recognized the burnished finish immediately. A shop I used to work in brought in all kinds of burnished rod for making cylinders.

[@Roger-gm9tl]

First of all, alot of you guys have great ideas & great matching skills, but you have to have all the machining equipment & skills in the first place to make whatever you guys are inventing !

[@gregsmith337]

Appreciate you sharing this method of producing such a great tool. I dispute the fact you need all the fancy tools. Some tools are indispensable but with a little imagination and a lot of elbow grease this could be made without a mill.

[@swamppifi6186]

we use these at work, you can buy them, but they are not cheap...this is good for small work shops....

[@manoeldejesusbaratalopes8517]

Achei espetacular. Uma profissão que eu admiro muito é do torneiro mecânico. São excelentes profissionais.

[@MrModify]

Very nice design.

[@BuildItAnyway]

for a really nice finish you can get some diamond burnishing tools They are pretty affordable. gives you a mirror finish

[@abbasyaiful7643]

Very extraordinary work, I really like it

[@Lesfac]

Nice video. I wouldn't mind having a go at that. However I don't understand what it does to sizing. I assume it will reduce a diameter slightly? How do you arrive at a finished size you may be aiming at?

[@RongWayJones]

It puts a radius on a rough edge like deburring it without removing any material...correct? I've heard of burnishing tools for repairing contacts/points before so it's rounded shape when not flat where the points meet.

[@jozefa1234]

nice tool made one from scrap pieces. used on aluminium with great result, diameter about 0,01 mm less after use tool.

[@digosov]

Top!!!

[@Gunny-Smith]

Very nice!

[@R2_D3]

6:34 That is a lot of run-out!! Holy Moly! Cool tool though!

[@FoxCrafts]

)))

[@protomanialab]

is it a tool to get the coaxiality during the lathe processing?

[@kevinnathanson6876]

Very nice! Some issues with the edit at the very end? (Black screen instead of video....)

[@branchandfoundry560]

Agreed, we lost the money shot 😢

[@TheRomeoGuy]

Non-machinist here (but hopeful for the future), would this also be surface hardening?

[@FoxCrafts]

Yeah, the surface is much harder

[@Tenneseejosh]

Bad editing. Black screen is never a good look.

[@patrickcorcoran4828]

I think that's the upload rather than editing, but either way there are big chunks of the video missing, replaced with a black screen.

[@Jesus-x3h]

I'm a dum dum when it comes to this so excuse me for asking...What is it used for??

[@kizgintosbaga]

so what do you do with it ?

[@FREETIMETRAVELLERS]

10.05 what is process called ? To decrease the size for not to come the ball !

[@сергейчумак-д4ъ]

Hello Mister Kraft! What are you doing?

[@dharmendraisurana8678]

Time pass

[@Christine-s7f]

How much longer do we have to put up with your Ads .😩

[@ssa3eedss]

I watched mekanik mesin from Indonesia about a month ago, made it!

[@DarioushAryan]

bravoo

[@FREETIMETRAVELLERS]

Please next put process name with size do you machining

[@Wheel_Horse]

You work in the shop in socks and sandals... do you at LEAST wear eye protection for when you break a cutter, or chips fly?

[@voice2skull.]

Whoa!

[@renetr6771]

Ofc this tool is available in "store". Its called a "Roller burnishing tool" (i guess thats the correct translation). There are many different designs, even shapes to role a complex outer conture.

[@mbreakn]

Насколько соток уминает поверхность?

[@floser7118]

No es correcto usar anillos cuando manipulas un torno.

[@SALVAJE_FOREVER]

very bad result i dont know what item you produce due to the last portion of the video was block,,

[@strykerjones8842]

6:41 Looks like run out in the tool. Bad collet?

[@FoxCrafts]

Yep

[@HanselOzoria-m6b]

La pulidora usted la usa mal, el fuego tiene que caer del lado de usted.

[@pawekowalski7469]

👍

[@small-china]

достаточно одного маленького подпипника наружу. вполне спавится с накаткой. делать и быстрей и проще

[@tromaztrombetta8901]

Tela preta no final

[@Zeet130]

For me...not good job. Only fajn Machine

[@stansmith1911]

I know how to true it up without that tool.

[@gilbertomoreira541]

Precisa se atentar para as normas de segurança isso e de extrema importância em qualquer operação com máquinas operatrizes

[@grahamwilson1358]

fly cutter

[@MeghaBhide-b5m]

Kis kam ka hai

[@rickventura1109]

Inclusão para deficientes visuais começa em 11:13 e termina em 11:32.

[@luckyigbinedion2001]

So the question is what did you really do? Just a waste of time and peoples data

[@LuisRodriguez-lz8lr]

😂🤣🤣

[@FoxCrafts]

🙃

[@aliiqbal7759]

Time and data wasted....

[@fabianpereyra5361]

Malisimo no se entiende para que es. Y encima la pantalla negra

[@CarlosAlberto-hu8hc]

?????

[@reinaldozanolla2694]

Que lixo de ideia 😢