FR-S interior transformation!

[@ktmjay9920]

Most impressive video I have seen you make. Truly committed to that project. Awesome work 💪

[@m85fpv66]

ktmjay agree!

[@nenadnastasic5018]

I know it's mostly car related video but that move at 14:46, huuuuge respect!

[@samsonitemike3127]

Your enthusiasm is contagious..........Those two enter/exit on the garage and the split s where just awesome!

[@colewould6917]

That last 30 seconds of the flight🤯

[@Free_3.0]

Those transitions during the interior B roll-- 👌🏾👌🏾👌🏾 the dollyzoom was a nice touch. 👏🏾👏🏾👏🏾.

[@calypsoraz4318]

Dude, my Crosstrek has orange stitching everywhere. Seats, door panels, dash, steering wheel. My car is also silver. Definitely a strange color combo. You dedication is something else, Drew.

[@brockszymanski6203]

So so so so clean and so impressed with the mods you take on

[@air-headedaviator1805]

Beginner Car enthusiast (me): Get me some nicer tires and maybe a sport torsion bar Peak Car enthusiasts (Drib): let me resow, relight, and rePROGRAM my cars entire trim appearance.

[@abandonedhope2606]

the reprogramming part. was. downright. insane. half chinese half english. chip in and out passed around like a joint. and finally it works.

[@ghostechvids]

Drew! Congratulations on finishing the interior of your car, it came out great! I can’t begin to tell you how much I look forward to seeing Le Drib vlogs! Quarantine is rough! Seen well over 60 of your vids.... You might consider making a shit ton vids super soon! Everyone is in lockdown! I can’t stop ordering parts for multiple quads. Stay safe, and thanks for documenting the way you do. Ps...I do admire the smoothness of your flying, especially since i can compare it from a few years ago! (Like i said, I’ve been trying to catch up!)

[@justrooster4157]

you are one of the only people I know that can pull off being a drone nerd and cool at the same time. keep up the great content drew!

[@jellifpv735]

hehehehheh

[@OpaFPV]

Yep, you're insane! :) In my 51 years of wrenching on cars and motorcycles I've repaired and replaced engines, transmissions, suspensions, brakes, drive trains, ignitions, fuel systems, etc., but never an interior. The result looks great! Nice job!

[@flintlights]

Bro...what?? Respect my dude! The amount of work you put in was awesome! Fellow 10-series here too.

[@TheCaffeinator]

love the video! specifically this part at 10:20 so satisfying to watch

[@Ohmz_i]

ok huge respect to you man. being a car guy myself, and getting into fpv recently, i think i found as closely relatable person as i ever will.

[@johnvalencia2711]

Happy Birthday to me 🎂 I wish more fpv gear to come but Ledrib vlog would be a great gift to my birthday love your flow Thanks for inspiring me 💕

[@whereiseshan]

you just earned your self a subscriber for the amount of time and effort put into the car build ...super awesome!!

[@fpvraver]

INSANE!!!!!!!!!!!! You took the words out of my mouth 👄!!!!!! You are absolutely crazy 😜!!!!!! I would not want to do that to my sweet ass car !!!!!! Absolute perseverance brotha !!!!!!

[@Jason-ye5pg]

Wow watching you fly was amazing!! First time watching

[@propwash6880]

I had an FRS 2.0 Release. Modified the, suspension, exhaust and had a tune to remove the torque dip and to use corn fuel. Was set to put an Edelbrock supercharger in it and then had to sell because i needed a truck. I really miss the car.

[@LivingAsleepHD]

Came across this video very randomly and you've inspired me to take my interior more seriously and work on my videography for my own videos. Love the way you mesh your passion for cars and engineering and do what it takes to venture into new territory!

[@rcrdps8144]

One day, when you get "done" with the car, someone's going to buy that off of you for bluebook or less. Hopefully they know what a good deal they're getting. I sold a 240sx quite a few years ago that my brother had "built". He was meticulous like you, so even with an RB20 swap, everything worked and looked stock. Was my daily driver for an hour commute to work. Never missed a beat. My touches to the car was I de-soldered the eeprom and found a program to change the maps. Tuned it to about 12.5:1, and used a "flip/switch" chip to increase timing 5 degrees when water injection kicked in. Also did a Holset turbo swap. At a light, I could come of the line smoothly and just hold it to the floor and it would start burning rubber once the turbo kicked in all the way to redline.

[@quadspeedfpv]

I always enjoy your videos Drew you are a naturally entertaining person as well as an awesome pilot and your editing skills are always improving keep up the good work my friend.

[@AndreaFpvAerials]

Drew i love everything about this video. Cars, Vlog, Great Editing and FPV...Just beautiful!

[@kevinjoshuamacasero7215]

Where did you bought the seat covers?

[@Scaze74]

My Toyota is FANTASTIC! Own a GT86 -12 and loving it!

[@flystylefpv5658]

Drew I am LOVING these vlog videos! Keep it up man!

[@jana171]

Now THAT's going all in on a car interior project... an Insane need for detail control, i LOVE it :-)

[@air-headedaviator1805]

I could never do it. Such patience

[@bluelinefpv559]

Really nice vlog! Enjoyed the off normal topic. It's nice to see things other then FPV from you!

[@oumotorr]

This has no right to look this CLEAN

[@CentroidAerialImages]

Love the car stuff and the flying too. The "BIG" picture is amazing.

[@thecreaturefpv9295]

The KING of flow! That flight was great. I really enjoyed this video, you should definitely bring more of your hobbies outside of FPV to your channel. Great work with the interior makeover cuz it looks so sick

[@WEEBER13]

FANTASTIC FLYING, DREW! (And the car is dope, too.)

[@dimanfpv3247]

Amazing job... I love how it all started because you saved $100 on a pair of car seat covers.

[@rebelquadronfpv1065]

Beast mode when you change the gauge cluster chip!!!!!!

[@stephenbellESQ]

10 series gang! But I like the red stitching

[@m85fpv66]

You’ve got better car content here than many car-related channels🤯 Awesome FPV footage as well!

[@JoshWithrow]

That smooth always gets me. I aspire, but nothing compares...

[@hoodzie9671]

LOVING THE CAR CONTENT!!! Please keep doing both:)) I stg I'll drop I like in every episode

[@juneloko]

Now that was sick car video and some rippage at the end 👍

[@illegalfpv9030]

Damn dude you are a master solderererer! Love the mods and great flying as usual!

[@maafeustyle]

Great changes! Can you provide a little more info on the Gauge cluster swap please? The pages you went to to get the info on the chip flash, graphics, and the parts you got to solder the chip to? Thanks a million!

[@mooredge]

Yes, would love to see some car videos. Crazy work replacing that chip. I have a 2018 BRZ and I've been itching to start doing some mods.

[@SKYnewsBlue]

Looks AWESOME Dude. Keep up the hard work! We appreciate it!

[@Darksagan]

Jack of all trades. Great video.

[@LetsFlyRC]

That Immelmann, though. Whoot. Sick lines. Liking the car stuff. That’s kinda my jam, also. 😆 It is always fun flying with you, buddy.

[@WhiteBarrett]

Absolute insane flying! Awesome man! Love your videos, also nice to see some of your car stuff :)

[@JeffWok]

That interior looks great! Excellent job

[@ninjamonkeyfpv8855]

Buuuff.. Such a sexy car.. Love that you're mashing up your old channel with this one.. I like to see this..

[@metalmavenmike80]

This is how the 10 Series Shoudl have come! Legit.

[@steveh2040]

It looks great! I learned a lot from the cluster swap

[@kydawg1684]

Killer work man.... that is a passion.

[@DangerDavefpv]

Sweet ledrib Mr Drew. Love doing custom interior work car audio it's all a passion and a skill

[@StacemanFPV]

Dude.. Mad respect on the effort!

[@David__]

Nice interior upgrades + very tidy edit too! Thanks for sharing :)

[@Hwyw]

Yee lit drew is like my role model

[@OutaTimeFPV]

@Le Drib I think it was a great choice on the steering wheel. I see so many people going with a detachable wheel and that’s such an overdone and unfitting mod in my opinion. I went the opposite and switched most of the accents to red, as that’s the accent color on my black wheels (RPF1). Gauge swap is now very tempting haha.

[@___echo___]

Hey, some find it convenient, plus its easily customizable

[@jellifpv735]

Your car is like my drone. Ive been trying to get all the parts since January.

[@masongalway6380]

Heheheheh

[@Luv2ripFPV]

That was a great video Drew! Blown away with the LED mods you did! Great rip session.. I like to see the crashes as well!

[@HuntAndFishExchange]

Wow - Super ambitious! - Sweet Flying

[@adampinkerton8091]

Carpark level transfer, Faaark "said the crow" 🍻

[@DoubleA_AMAfpv]

Great job, Drew. It looks NICE!

[@Thendub]

That's detail right there great work!

[@wynnfpv]

So good man. Flying was spot on

[@JuiceBiker]

Now you are a tuner. Nice. Love that car. Big dream....i drive Supra for a long time....then i get sick.....i lost all😥

[@ericbberry]

Look good. Feel good. Fly good.

[@g-nice4928]

Well done on that interior painting

[@mickeylerch]

Man I love how clean it came out !! Noice!!👍👍👍

[@absoloodle37]

Thanks for another amazing freestyle video!

[@amcezm0n3y47]

I own a 13 FRS and wondered about the cluster swap.. I had no idea it would be so hard. You could probably make a fortune selling those retro fit kits

[@maxair420]

U do the BEST edits!! 👍🏽👍🏽

[@newlasound]

Bro commitment! This is awesome!

[@-sickfast434]

I always do the ascents in my cars also usually with paint but I been doing some hydro dipping and its dope man way better then vinyl or paint

[@ultraul7685]

Hey, great job Le Drib!

[@kashmierfortune2912]

One day I wish to rip it like you....thank for sharing ....

[@etops.flight]

How many times do you have to crash just to get the quad through that opening in the car park in a straight line let alone backwards or inverted? Some crazy stuff!

[@truefpvblood158]

😆 was fun to watch! Keep em coming big guy!

[@kiyora4380]

Such a nice car

[@MuLoO123]

Some sick moves there, you still inspire me. Ow, and the car looks nice ;)

[@Heinousness]

Bro this is crazy work...

[@garamfpv]

truly wonderful flying bro🔥🔥🤞🏻

[@malikphillips4032]

A lot of work but man does the interior look fire.

[@pufko]

That chip swap was sick! My current thought is if this would be possible with a 2022 digital cluster, as crazy as that sounds. I have a 2016 BRZ and would kill to try something like this

[@KLNYC]

Damn GM Engineer know his stuffs 💪💪

[@paulgeorge1069]

Great job on the car but you should have just got a Dakota digital dash and mold it in. One of a kind will really make you proud. Oh ya just got your jet pilot shirt yesterday it's awesome. Make another version with some bright colors so you can see it better.

[@NoiseBoysGarage]

I work at an upholstery shop for really nice hod rods and high end cars and boats . If your in Phx area come see us and let’s fly . We wrap wheels too . I personally custom fabricate and wrap my panels

[@sheleah8499]

Came out sick 🙌🏼

[@K.buildingthings]

question, you might have answered this before . like to know how you control the new cluster without the selector buttons that are usually on the newer models's steering

[@orbi_fpv]

🤯 ho! Man I’m very impress of all that work good job!!!!

[@DroneOn]

"I thought, let's paint sum stuff 2" Awesome.

[@c8lebb]

Where did you get that ebrake handle if you don't mind me asking? Love the way it looks.

[@gates762x6]

Loved the FPV ending, I’ve been wanting to get into this but all my money has been tied up in my 86😂

[@KB-nt6bw]

Is this in Orlando? I happen to see a lot of familiar looking buildings.

[@yeahboyd5371]

Pretty cool Drew

[@nikkofpv2902]

Great video I love cars as well. I wish i had the time or money you have to complete these awesome projects and do e so well. Where did your gf go?? Haven't seen her in vids lately, hope everything still good there. She's a keeper from what I see. I will be visiting in a few months, hope to see you at the store.

[@lorentacar]

Thank u for sharing your mods it looks 👌and incrédible b-rolls at the end... That a perfect illustration of your new slogan « persevere » and your flying is Just... sorry i am speechless 😶 love u m’en!

[@mgraystl636]

Nice work man

[@ohgeez9971]

Wow! Just WOW!

[@Diskjok11]

I respect all the work you did, and it came out clean, but it looks more stock than it did when you started? I’m assuming that was the point. Can someone confirm?

[@LeDribFPV]

I go for the OEM plus look, how I think it should have looked from the factory

[@Diskjok11]

Le Drib well in that case it looks great! I’m moving down to Orlando this summer and I just got into fpv, do you guys at RR do a lot of fun fly’s or just little meets? I’d love to meet you and JB

[@LeDribFPV]

Yes we do some meet ups at Rotor Riot. However with everything going on we haven’t done any in a bit. Hopefully things get back to normal soon we can start doing events again

[@merpproductions2663]

Wow that's awesome🥰🥰 I'd love to do the Screenretrofit too but... I think I shouldnt try that😂

[@OutaTimeFPV]

Series 10 squad!!!

[@LeDribFPV]

🔥

[@NicovanBurick]

Loved the content! Very inspiring.