Buy Parts here: tapmagician.co.uk/NSManufacturersShoppingSelect.aspx?ENC8FC274C2&Franke&Ascona
@markyboyclark8 күн бұрын
I love this tap! I've had this issue. You have sand my life!! Thank you!! ❤
@adrianrichards247 Жыл бұрын
Tremendous & simple video …Thanks ….note when completed my spout did not go in first / second time …found that by rotating spout slightly left or right …it then went in sweat as a nut. Cheers Guys
@johnsammons3827 Жыл бұрын
I have tried taking the spout off , but it does not want to budge . Is there a knack of getting these ascona swivels out. Help would be appreciated. It seems you grip and push forward and up , but trying this the sink flexes and you think that you may damage the stainless steel sink and they are made thinner today
@emmanicholls14143 жыл бұрын
I need to replace the whole spout. Presumably it’ll have new o rings on it & will be even easier? No need to turn off the water?
@ewoodrailway3 жыл бұрын
Great how to video, the gap between the back of my tap and the wall is about 8mm so I'm gonna need a stubby Allen key ..could be a tricky job
@tapmagician3 жыл бұрын
Hi If you turn the handle (to closed position) you may have better luck trying to undo the screw with the screw on the underside position of the handle, apposed to at the back
@ewoodrailway3 жыл бұрын
Tap Magician thanks for your response. The tap looks brilliant but where it is isn't ideal and it's probably more tricky to remove the whole thing. I get what you mean with the individual handles but if you turn them to the on position the screw underneath will get to the back where the 8mm gap is..frustrating to say the least.
@jnoonanuk7 ай бұрын
Great video 😊 Do you need to put a bit of silicone grease on the o rings?
@tapmagician7 ай бұрын
When you replace the new rubber seals they need greasing with a suitable silicone grease.
@jnoonanuk7 ай бұрын
@@tapmagician Thanks for your reply, does it need to be food grade grease? Sorry thanks 😊
@tapmagician7 ай бұрын
@@jnoonanuk I would recommend using a WRAS approved grease. See the link below www.tapmagician.co.uk/NSManufacturersShoppingSelect.aspx?SL05
@ralphthebulldog5163 Жыл бұрын
Where can i find the hard platic one? or will a normail o ring be okay?
@tapmagician Жыл бұрын
Please buy the kit here tapmagician.co.uk/NSManufacturersShoppingSelect.aspx?ENC8FC274C2&Franke&Ascona
@cliffcarlo1802 жыл бұрын
Just to be safe, always put the plugs in the sink. Stops the risk of losing that grub screw down the plughole 👍👍
@moresportschannel65925 жыл бұрын
My tap didnt have the hole in the back so I cant tighten up the little screw!