Franklin Armory AR15 binary trigger complete reassembly trick - no tools needed

This will show you how to put the trigger back together without pulling out your hair or launching anything across the room. Please understand I may have the official names for some of the components incorrect.

[@Frankie5Angels150]

I really appreciate how you leave in the “oops” and then show us how to recover from it without editing tricks to make it look perfect! It shows us how even a non expert can do it.

[@smithn.wesson495]

This is one of the best reassembly videos for the Franklin Armory trigger anywhere on the internet. As an owner of this binary trigger, I can assure you that trying to get that tiny IDS spring back in during assembly and having the master slave pin go in just right to hold the disconnector and IDS together at the same time is an absolute bitch from Hell if you are not doing it the exact right way. Download and save this video as everyone who owns the Franklin Armory trigger will need it at some point.

[@4237650]

*****TIP: I figured out that applying just a little gun grease (ex. EWG Slip 2000) to the part (2nd disconector) that held the IDS spring kept it firmly in place and made installation much easier so spring would not just keep falling out***** thanks for video make it easy to do.

[@reyvinarms1420]

That's a great idea, thanks for sharing!

[@einzelganger9970]

Excellent video! Clear and to the point. Not sure I ever could have ever reassembled mine without your help. Thank You!

[@newblackgta]

Thank You for showing us how to put it back together. My trigger came apart during installation and your video saved the day for me.

[@BrianMoore-p5o]

I have 10 thumbs and have difficulty with small pieces. I put a piece if scotch tape on one side to hold the idea spring in leaving enough room for the slave pin. Worked for me. Great video by the way.

[@Gator412pgh]

love the video the paper instructions that came with the bfs3 was damn near impossiable to see the pics so thanks clearing things uo

[@ScizzyGibbler]

Seriously, for the price they should send you a high resolution photo color guide, what a joke!

[@michaellane1661]

Thank you! You saved me as well! I had that idea spring installed vertically at the front in the “deepest groove” of the right disconnector. Thank goodness you posted this video! I appreciate it sir! 🤘🏽🤘🏽🍻🇺🇸🤘🏽🤘🏽

[@Blahman240]

Thank you for the guide, but I'm just going to continue to never let my trigger come apart.

[@tsafa]

Thank you. I didn't know where that little spring was supposed to go

[@zVoiddd]

Didn't need to reinstall one just needed a sort of understanding on how it works , hopefully I can try to replicate it myself. Thank you for the video!

[@roberthunden1757]

You just saved me so much frustration. Wish I could buy you a beer! Thank you.

[@shawnfarrell5380]

I have to say thank-you also....saved me having to go to a gunsmith

[@liljohn309]

Great video just needs a little bit more light so we can actually see a little bit better

[@ScizzyGibbler]

Thank you for this! Helped me out with that little spring. Popped out on me during the installation, lmao

[@dwreck96]

Thanks for the detailed video.

[@platanoman8913]

Watching this video made me realize that i lost the slave pin, yikes, thank you!!!!

[@phatphingers9788]

LMAO 🤣 somehow I just knew my dumb ass was going to need this video as soon as started lookin at the install. I was right, so thank you!

[@RappSTARR1]

Thanks for the vid will help with the build indeed

[@blakewilliams5165]

Great video, huge help!

[@Kongfufrank]

Hello, could you please provide the trigger measurements?

[@Subhuman828]

Lifesaver, thanks man!

[@sw640]

This video saved me thank You !!!

[@joshfernandez6892]

Super helpful video. Thank you so much

[@yayyo24]

Life saver bro

[@hoganlarvey]

Thank you SO MUCH

[@treverlawrence5183]

Thank you very much I appreciate it Great video

[@NeckbeardActual]

I love you.

[@barrybell100]

Great video. Thanks

[@tacticaloutdoors7553]

Any input on whyy trigger when in binary selection only runs just as it does in semi??????

[@rampage_45]

Question. If you have a binary trigger and want to change the safety selector, will it render the binary application useless??

[@AlexMurray-lh7wn]

Hello sir, I had a quick question regarding your other video on the installation of the Franklin Armory binary trigger group to your zastava M70. I wanted to ask your vertical foregrip is amazing of that rifle. Where did you source it? If I may ask. Thank you for your content and appreciate your time sir.

[@reyvinarms1420]

It was designed and 3d printed by a friend. I will see about getting the file posted somewhere. Thanks for the comment.

[@lsx6.279]

Can I swap out the safety Selector nobs for different ones

[@jimverw5863]

It would be better to have a longer slave pin.

[@rafaellugo5747]

Where can I order the trigger?

[@BigMC422]

Anyone know where I can get a replacement e-clip? One of mine must have fell off somehow.

[@gq7654]

Have you figured out where to get e clips? Mine fell out too!

[@BigMC422]

@@gq7654 nope

[@israelsolis6426]

Great video does it work on the Ruger 556 MPR?

[@reyvinarms1420]

Since I do not own the Ruger I cannot give 100% certainty. From the research I have done, the Ruger has a small pin configuration like most AR15s out there. I am 99% sure it will work fine.

[@kojinus]

thank you so hard

[@bornnaked424]

Thank you for that 😮‍💨😂

[@Rambo30522]

Does it come ready to install from the package ?or do we need to assemble it ?

[@reyvinarms1420]

It comes ready to install with the slave pin in place. If you take it apart, this video will help get it back together.

[@Rambo30522]

@@reyvinarms1420 Thx 4 feedback

[@susanmcpeterson1136]

4:54 mines doesn’t rock I followed what ya said, but its so tight it doesn’t move at all . How do I fix it?

[@reyvinarms1420]

I am guessing that you have the disconnecter spring placed on the end of the disconnector and not in the gap area. Sorry if I cannot provide a more detailed explanation.

[@susanmcpeterson1136]

@@reyvinarms1420 I followed your video more throughly and now that parts moves correctly. Im going to test it today

[@reyvinarms1420]

Great, glad to hear you figured it out.

[@TheATFcanSuckmyDicc]

Are these triggers comparable for any AR15?? I have a set delta and im thinking about getting one

[@reyvinarms1420]

They make binary triggers for a few different makes/models if firearms. This particular one is for ar15 variants.

[@TheATFcanSuckmyDicc]

@@reyvinarms1420 yes I’m aware it’s for ar15 variants, on their site it said “fits most models” and I was curious if anyone knew if there was a way I could confirm it would fit mine. Btw great video, I subscribed.

[@jayvetaw219]

do i take the eclip pen out when i actually install the trigger??

[@reyvinarms1420]

No, the only pin that get removed is the slave pin when it is pushed out of the receiver by the trigger pin.

[@jayvetaw219]

@@reyvinarms1420 okay thanks!!

[@jonathassousa4623]

👍

[@G.M.N_tactical]

You need to re do this 🤦🏽

[@reyvinarms1420]

What about it would you like to see different?

[@gettoclickin1376]

@@reyvinarms1420 like can you put it into the gun step bye step pls I don’t understand how we supposed to do this if your only showing lil parts not the the full thing 🥹

[@buzzybrown2552]

End of video sucks! Pin orientation???.?WTF?

[@reyvinarms1420]

The pin can go through either side with either end of the pin. The e-clips are the same for either end. There are no orientation requirements.

[@user-qx5se7hj2x]

Can’t see sht

[@xxc-strokesxx6247]

0:47 “no tools required” why?!? Why do you lie #Clickbait

[@reyvinarms1420]

Please read the title. "No tools needed" for REASSEMBLY. Removal of the E-clip is a disassembly operation LOL

[@xxc-strokesxx6247]

I was just being goofy! Looking to get a binary trigger for my Voodoo but I was very curious on how they operate compared to a semi auto trigger! Video was very helpful in understanding that process!

[@reyvinarms1420]

@@xxc-strokesxx6247 I was being goofy as well. They run really well provided you get the timing down. If you just pull and release as fast as you can, you will outpace the bolt carrier and get a failure to fire. Then you have to cycle the action and start again. If you get into a nice rhythm, you can RIP through a mag in no time.

[@lbhamlo]

That was the worst video I have ever seen.