Upgrade your 3D Printer or Buy the Expensive Version - CR-10S vs CR-10S Pro V2 - Vlog 5

[@Chriss_Workshop]

Its nice how you were able to talk in your print room and your machines werent even noticable. Gotta love silent boards.

[@FranklyBuilt]

Yep! Also though the boom mic was like. IN my mouth the whole time lol 😂

[@Dayquan_Bonqweeqwee]

Guys can we just take a moment to appreciate how helpful and smart Frank is? I mean he is so knowledgeable and his vids are my go to if I have an issue or a question I need answered 9 times out of 10 Frank has a video on it. Thank you Frank 🙏🏼

[@jeremygard]

Finally, an honest review from someone who actually knows what they're talking about from personal experience. Awesome video man. Made my decision to get the CR10S Pro. Cheers!

[@FranklyBuilt]

Oh hell yeah!

[@oldskoolwrecker7235]

I agree with what you said about upgrading your printer. I knew nothing about 3d printing. I purchased an Ender3. Just a plain Jane ender3 not a v2 or anything along those lines. I put direct drive ,silent board, dual z axis, microswiss hotend, hardened steel nozzle and I've recently added a rasberry pi and did a full linear rail upgrade and doing all of those upgrades myself and doing the research to complete those upgrades have taught me so much about 3d printing. I'd go with the upgrade version every time lol. I'm now refurbishing an old anycubic kossel linear plus. This is going to challenge every bit of my knowledge to do this but if I hadn't learned so much from doing the other upgrades I'd still be where I started. Thanks for all you do and keep up the great work!!

[@blessedbabyboutique]

Best 3D printing channel on KZbin. My son who is 15 got a printer when he was 11 ;we had many tears and failures and didn’t know how to get him a complete print . Out of Frustration it sat on the shelf for 3 years.However since discovering. Frankly Built and following his excellent advice my son is now getting brilliant successful prints and has grown in his confidence around 3D printing . So thank you 😊Ps he has the CR10 s .Great review we will keep this in mind when looking for his next printer .

[@gd.ritter]

I just got my first printer as a hand-me-down from a friend who upgrade. So now I have a CR-10S. I updated the official firmware to current and did the Capricorn upgrade when the original Bowden tube kept clogging up (the end was in rough shape). I don't have anything to compare it to but I'm really happy with the prints and really enjoying learning how to be good at it.

[@anthonypoole4025]

Frank, you have inspired me to jump into 3D printing for cosplay. I bought a CR-10 for my first printer. You are a great content creator, and it doesn't hurt that you're a fellow airman 😎. Keep up the great work!

[@joshuatran430]

The silent board upgrade.... When my CR10 did its first print, my wife kept going around the house at 10pm at night looking out all the windows, upstairs, downstairs, north, south, east, and west. She kept complaining to me that some terrible neighbour is leaving their dog outside and the poor thing keeps crying trying to come back inside (it was January and cold.) She asked me "don't you hear that poor dog? I can't find it though, I looked everywhere I can't find him but he keeps crying." I told her "I don't hear anything, I don't hear any dog crying or howling." She then told me to listen "see... There it is, it's crying, it just cried." I then laughed and realized it was the printer in the basement. I told her "go look in the basement, the poor dog is stuck in our basement." 😂

[@CafeRacer1975]

I never thought I'd subscribe to a channel like this, but this review and the effort you put into helping the community made me feel compelled to sub.. I'll be sharing this page with my friends and family.

[@FranklyBuilt]

Thank you so much! I’m glad my videos could help!

[@CafeRacer1975]

@@FranklyBuilt so. I can get a cr10s v3 400mm with a micro swiss upgrade for about $375 used. Should I chose that over a pro V2? I need to print at least 300mmx300mm for some prints.

[@guitarguyf16]

Legit, amazing review. People need to watch this. I’ve had an ender 3v2 for 2 months that I’ve fallen in love with and I’ve been wanting a bigger build surface. I found the cr10s pro v2 for 438 shipped from Banggood and jumped on it. Keep up the great work!

[@WynterNZ]

Man, gotta say best and most helpful 3D printing channel with FDM printers. Great job!

[@FranklyBuilt]

Hey thanks so much!

[@SandF3DPrinting]

Been going down a rabbit hole of 3d printing with your videos. I'm very interested in getting my own and starting a new hobby. Not expecting pro results to begin with but with your videos and tips, I think I can get there. Awesome videos man please keep it up.

[@nathantebbens634]

Wish this video came out sooner! I've had issues with my stock bowden tube in the past, and just upgraded it a few days ago. I think I'm going to look into those metal extruders too. I'm running a standard CR-10, so there's lots of upgrades to consider. Great video!

[@knitres]

I just bought the V3 and I do like the quietness of it. The only thing that makes noise if the fan and the retraction feature. The direct extrusion is nice as well

[@shawnmcandrew6923]

me too those dam fans are Noisy

[@VegasGuy89183]

I paid $302 for my CR-10s Pro V2 in August 2021. Best deal I've seen for this printer. Bought it from NewEgg. And I agree 100%. The CR-10s Pro V2 is an awesome printer. It was a great upgrade from my Anet A8 and Ender 3. My favorite upgrade I did to it was to stop using the stock heavy aluminum print surface and replace it with FR4 epoxy board.

[@Pajake570]

thats a freaking steal. i ever see that deal i am buying 2 more of them.

[@ReclaimerPC]

Brand new to 3D printing as of last week. Got the 5 plus for printing large items. Can confirm that it will take some time to get it right, but now that I’ve got it dialed in, it works like a dream. Can also confirm that the stock tube and extruder are not the best. Had the white tube fail after about 20 hours of printing, (melted/backed out and clogged the nozzle). No issues since making those two upgrades. Great video.

[@F1NNJA_Industries]

On the binge watch grind! Got a printer in December and Frankly, (get it) these videos help me so much.

[@chrisrowles843]

I work for a scaffold company designing scaffold on AutoCAD for 10 years now. I have jumped into the world of Fusion 360 to learn the programme before buying a printer. So after watching this video and a few others, it seems the Creality 3D CR-10S PRO V2.0 is the one to buy! Wish me luck!

[@carterkeith8369]

THANK YOU SO MUCH! I was so confused when looking at all the models and they to figure it out and then I came to the Ender 3 Pro and liked it but was worried the bed was going to be to too small for bigger projects like Iron Man Armors.

[@bowieinc]

Fantastic video. You are soo right! I learned so much from wrestling with an old monoprice maker select v2, modding it with every possible upgrade. It really gave me a firm foundation.

[@DennisMurphey]

i just added BL touch, Micro Swiss Hot End and Direct Drive to my 3 year old 10s ProV1 and it is a new machine. I also had put on 10S Max Z axis Struts and Synched Z axis Belt and Pullys. Updated Firmware makes the machine a Tank and reliable, Great sturdy and solid build. Prints smooth and precise. All it needs now is Flex Bed for part removable. Total Investment $500 today. My 10s Pro V1 was a refurbished unit. Dennis

[@YakovK09]

would be an awesome concept of videos for your new channel Frank! Great video as always

[@daze143]

Good video with good points. I actually managed to snag a cr-10s pro v2 for $420, and I'm very happy with it so far.

[@dragos8839]

What would you recommend, cr 10-s or ender 5 plus

[@FranklyBuilt]

Ender-5 plus

[@SuperSniper1968]

I got a CR10s because of your review it was a great investment for me. Thank you

[@barryg41]

Hell yeah Brother! Great info! Especially, keeping your printer tight and calibrated.

[@christophervaughn3834]

I don't even have a 3d printer but I'm watching the whole video. I love the content, man, this is so interesting. Who knows, maybe this will become a hobby for me in the future 😁.

[@Poesghost]

My first printer was the Prusa Mini and I can’t stop printing things. It’s been non stop. I’m looking at getting one of these printers next. It’s fun even if it’s just a hobby.

[@TheGozonuts]

Thanks a million! You've answered almost all questions that I had about my CR10!

[@TheRedCloudAMV]

Agree with everything you said, especially about the glass bed, I struggled for months with the bed on my cr10s until I realised it was warped and bought an IKEA glass mirror tile, it works almost perfectly but i think I'm going to replace it with the ultrabase that came with my (now dead) anycubic printer

[@Eragonfan100]

For years I thought the glass is the problem. I bought a mirror. Didnt help. Bought an Anycubic Ultrabse, didnt work. Then I got the tip from a friend that the bed is the problem and that a tape in the middle helped. And that was it. The aluminium bed was the problem.

[@davedennis6042]

Good info, man. I just ordered an Ender 3. My first 3D printer. I'm nervous, but according to you, it's all a matter of getting it set up and dialed in. I hope to print small stuff and maybe a couple of helmets. But thanks for your help.

[@ericprint3576]

My ender 3 taught me so many problems that made working with my cr-10 easier I've been printing two years the cr-10 to me was a great investment for what I do

[@dragos8839]

Is the cr-10 better than the ender 3 and ender 5 ? I want accurate printing, bigger printing volume than the ender 3, maybe resin printing

[@FranklyBuilt]

Resin is next level accurate but the 10s is bigger than the 3 and 5

[@dragos8839]

@@FranklyBuilt can you resin print on the enders ?

[@MKhalil95]

Man! This is a great video. Full of great advice. I liked the stickers!

[@saulmas1801]

Just watching this now after my own printer, I definitely agree with being against glass beds. I've had to learn to deal with it but I'll take your advice and do a bed upgrade

[@benlawrie6676]

Great video. I’ve got into 3D printing in the last year through work as I need to create machine tooling and have been using a pair of Ender 3 Pros (did extruder, Capricorn and spring upgrades on both which made a big difference). Have been really wanting to get one for myself to get into as a hobby and start making some cosplay too. Was torn between a Cr10 pro v2 or an Ender 5 Plus - have gone for the 5 Plus in the end and just waiting for it to arrive! Find your videos really helpful. Thanks!

[@huntercrozier128]

Day 2 of thanking Frank for his service

[@thecomiccircuit]

Great information, I agree the Ender 3 origiinal is an amazing printer, everyone who asks me I always recommend it versus any other printer.

[@Mr_Waffuls]

Could you do a tutorial video on the cr-10 standalone kit? Or is it simple enough to put together?

[@Shirleehee]

13:11 "I was sleeping on this bed" I don't think that's what they're used for...

[@Kyyanno]

Great video, helped me make my mind up on a printer finally, got a CR-10s on its way, along with a metal extruder, capricorn tube & carborundum glass plate :D can't wait to get started!

[@DeaconAles]

This is super helpful. I had an Anycubic i3 Mega, and upgraded to the cr10s Pro v2, and have had so many problems. I think I may be dialing it in, but still wrestling through.

[@TMR06SS]

2:06-2:26 straight fire loved the wording I hope to be in that realm soon.... Also that just made me a subscriber.

[@PhilippensTube]

What about the CR10 V3? It looks like it's got all the nice things too: double Z axis, direct drive extruder (which I think is a plus) and while it doesn't have the BL Touch, it can be upgraded (as a drop in upgrade).

[@JordanBuilds3D]

I learn something new every time! I think it's worth noting that the cr10 v2 (not the pro or s) is 452$ US and comes with all the upgrades minus the Bowden tube and bl touch. Not sure about the bed springs though. Loved the vid frank, keep it up!

[@scotthoffmaster4600]

I picked a sunlu S8...basically a decent cr10 clone for 159 bucks, and an anycubic i3 mega S for about the same. All in with the upgrades ive done im still cheaper then the regular cr10 s for both printers. BUT the sunlu does require upgrades to be a good machine its just a very solid base. And the anycubic is a great out of the box machine.

[@Crowquilll]

Great video! I agree with 90% of it. I bought an Ender 3 Pro last July knowing that it could do nice prints out of the box. There was also a great userbase and established upgrade path. Hasn't let me down so far. Today I'd buy a v2 and save printing all the common upgrades. I loved my glass print bed until I got a spring steel PEI sheet. There's nothing better for PLA. Another argument for upgrading is initial cost. 3d printers are modular by design. If you like and use it then you can always upgrade it and make it better. Biggest factor on which machine to buy is what print size you need.

[@hukigid]

i turned my ender 5 plus to what you could call an ender 5 plus pro. added a flexi filament extruder, from macewan3d, silent board, noctua silent fans, p3d hercules .6 noz, cap tubing , leds, a camera and the last thing is being shipped wich is a flex build plate. after that I am done. the machine is silent, sturdy and reliable. I have my setting in cura dialed in to my preffered filament (hatchbox)and she prints like a dream, failed prints are rare.

[@Vance16475]

man I was torn between these two and thought I wrote the ender 5 off talking to people on your discord then bam you hit me with thats the best of the 3 with minor upgrades.

[@JonathanCase12345]

The arc reactor intro gave me chills

[@boriliquid2880]

Thank you for this informative video!! Thanks from Puerto Rico!! :)

[@brunolopes9900]

I agree with the capricorn tube, however you MUST change the couplers too, because the stock ones are very low quality...And dont be cheap on filament, because capricorn tube as less toleranses than the stock one, so if you encounter a filament with no consistency on diameter capricorn+cheap filament will give trouble.

[@Talos1963]

Answered the exact question I was going to ask on the Discord. Thanks Frank!

[@stevenjones2371]

TY I been doing 3d printing for about 3 months I started with a ender 3d pro and yes to start off with a printer that has all the bells and whistles im glad i was like whats going on totally glad to upgrade and become one with a printer its a art form but TOTALLY worth it

[@chrisdixonstudios]

Your video was very helpful in my purchase after watching, thanks.

[@mattinman8800]

Thanks for the video, I pulled the trigger on a CR-10s Pro V2. I was almost swayed to go with and Ender 5 Plus. But after 5 years of fighting a Maker Select V2 for every print that came out of it. I wanted something a bit more plug and play. I'm going to try and pick up a used Ender 5 at some point though..

[@zackfolmar227]

Thanks so much Frank! Its so funny how we talked all about this a cople days ago lol

[@lordevilfishs3dprintingand184]

I have a Cr-10s pro v2 and an ender 3 pro, I have upgraded and learnt alot from the ender 3 pro, I upgraded to a carbondum glass bed I put pasted a really thin layer of non toxic Japanese scotch glue on it. The esun PLA+ and esun PETG sticks to it really well. As Bruno Lopes said don't go cheap on the filament or you risk causing problems. Funny googly eyes btw, I have a bobbing Stitch on my ender 3 pro.

[@FranklyBuilt]

Nice. I have to disagree with the filament thing tho. I’ve been using super cheap filament for over a year. Over 100kgs. Never any issues that aren’t my fault. I’ve also used expensive filament and it made no difference except to my wallet lol

[@lordevilfishs3dprintingand184]

@@FranklyBuiltwhere I live I can't really find proper good filament, most of them work fine but some have really bad diameter and nightmarish densities that destroy your extruder. I agree with you tho, most of my issues are my fault when I was still new even nowadays. Question: does anyone have a problem with Cr-10s Pro V2, when my power goes out and comes back on again my cr-10s pro v2 it does the power out resume print thing, but as it does this is the BL touch pin gets bent by the sides of my model, breaking the pin. Anyone else with this problem?

[@thedevil1286]

Just got a Cr-10s pro v2 for $500 to my door on Prime day 😀. It's been a fun week so far!

[@FranklyBuilt]

It was such a good deal!

[@MrFormenis]

Thanks for the great video as always, The question I'm asking myself is ender 5 plus or cr 10s ? Cause price wise the ender 5 plus is cheaper and has a bigger build Since I see you have both, can we have a comparison on those 2 machines?

[@JamesBuckleyusa]

Nice video, I thought it was very informative to hear about several different printers.

[@tumadsvids]

Update. The E3 Glass (black one) don't print PETG on the glass side it will take chunks out. Print on the texture surface perfectly. If it came with you V2. Clean and print. If you bought the glass. Hairspray and print. They are slightly different.

[@PanamonC]

I passed on the BL touch. (Seemed fragile to me.) Instead, I did a direct swap of the "crapacitve" stock sensor with an $8 INDUCTIVE sensor from Amazon. That upgrade, along with PEI coated magnetic spring metal printing surface, has made printing with my CR10s Pro an absolute joy.

[@FranklyBuilt]

That’s great!

[@TonyNocerino]

Thanks for the great video. Very educational and has helped me make my purchase decision

[@nearpath8785]

My cr10s came with some kind of internal bed leveling system that isn't a bl touch but seems to use the nozzle as a probe... I cans seem to find any info on if doing anything to upgrade the hotend/extruder will affect that

[@xxxxzorroxxxx]

This help me get Fever back .after my mom died. Thank you going do some dusting. 👍

[@FranklyBuilt]

It’s worth doing again my friend. I’m sorry for your loss

[@xxxxzorroxxxx]

Means a lot. Your videos are great. Binged watch all your videos have work don’t tell. And I just bought a printer from Creality the CR 10 version 2 pro. Wife going send me to my mom.🙏🥲

[@FranklyBuilt]

Oh thanks pal! And don’t worry I’ll keep it quiet haha

[@damienmoreau3859]

Excellent video, thanks a million!! Which one do you use to print armors?

[@richardcaracoza6782]

When you buy used CR10s for like $200 its definitely worth upgrading

[@mpulford311]

Great info brother. I bought a ender 3 pro did some upgrades like you mentioned and taught me how too work on these printers. I'm more hands on when it comes to fixing things then trying too understand the firmware and coding part of 3d printing sometimes even the slicer software trips me up. Haha. Keep making great videos. And thank you for your service. 👍👍

[@williamhargraves8813]

Waiting on my Cr10 s v2 to arrive 😱😍

[@rueben68]

Ok man it’s time for a how to on the stand-alone on the CR10S

[@seancraig6048]

Thanks so much! I just wish I’d seen this before I bought my CR-10. Thanks for the info on the upgrades. Ordered the kit while still watching the video. Now to find the second lead screw for my printer. Is there a lead screw upgrade you’d recommend?

[@FranklyBuilt]

Eh any from Amazon with good reviews

[@seancraig6048]

@@FranklyBuilt thanks.

[@pixel_vengeur391]

Hi Frank! have you ever looked into silencing the fans of you 3D printers? Adding Noctua fans and messing a tad with stepdown converters to power from the PSU, printing custom attachments for said fans, etc?

[@FranklyBuilt]

Yep IMO not worth it. They’re in a separate room. But I see people do it

[@pixel_vengeur391]

@@FranklyBuilt Right, yeah, I suppose that locking them in another room helps with the noise x) Thank you for responding anyway :D

[@littletrucklove]

I needed this video. I picked up an Ender3 v1 3 years ago. upgraded the bed, board, tube, hotend and so on. but now i want a bigger printer. been debating between the Ender5, Cr 10s, Cr 10 v2 and the Cr10mini. i enjoy doing the upgrades myself.

[@ShotgunR123]

V2

[@BossTweed69]

I got the ender 5 plus because of you and I love it, its my first printer so I'm no expert but it seems pretty good to me. Iv now got the 3d print bug lol.

[@Explore531]

I upgraded my cr10s too Ender 5 v2.2.1 silent board mute, and Hot end Silent Fan and direct drive and new Extruder its a very big Difference on the noises its totally silents and Creality glass plate now all I need is Creality Touch

[@paulviana838]

i have a cr10s pro and mine wont come down to level. any idea? it was working yesterday. any help i be grateful.

[@jacobchristianglover3655]

Excellent insight... I own 2 CR10Ss and 2 Ender 3s, and I agree with everything you shared. You earned a Like and Sub!!!

[@lioncat5394]

hey just wondering if there was anyplace I can get the cr 10s pro v2 that ships to Australia?

[@jeffreypajela1724]

I'm new to the hobby thanks for the information you have given 😀!!!

[@youngster30uk]

Been seeing your work in the user forums for a while now, and you do some awesome stuff. I do notice from your video though that you print at a relatively low speed, which with all your machines I guess works well for you. In regards to the 'ultrabase' The reason it is stock on the 5 plus and not the cr10max, is that it is heavy, on the 5 plus it make not difference, on a bed slinger, if you start to increase the speeds, this extra weight can cause problems. You are careful to say that this is what works for you at least, but for those printing at high speeds it many not be the case. No a criticism as you do explain it is what works well for you, just pointing out the potential issues for other uses cases of these machines Keep up the good work, I do enjoy seeing your awesome prints!

[@FranklyBuilt]

Hey thanks so very much man! I always try to be transparent and explain things as they apply to me and this area. Also; what forums?

[@youngster30uk]

@@FranklyBuilt Not sure, Definately facebook groups, possibly ender 5 group as thats what I visit most, but one of the facebook 3d Printing groups, thats what lead me here

[@FranklyBuilt]

Oh I post in there sometimes haha maybe it was me

[@youngster30uk]

@@FranklyBuilt It was 3d Printing Geeks faebook group, just had a look, first saw your work last June

[@wyattstahl6059]

Do you guys think I should get one of these or the endear 5 plus?

[@ericjouett1024]

I have a cr 10s the issue mine has is the when the bed heads up it displays a runaway temperature than shuts down I've replaced the board and bed heating element and still get the same results

[@Pajake570]

FYI regular glass beds you get from like lowes, work amazing. i don't know what peoples problem are with them. I have never had an issue whatsoever.

[@digitalmunky]

I noticed the link you provided for the CR-10S Pro V2 doesn't ship to the U.S... By chance do you have another link to a seller in the U.S. or will will ship here? Thanks in advance.

[@user-ss6db7fq1y]

not a marvel fan but that's a dope ass nova helmet

[@Klaymour28]

Im primarily a resin printer, but I am looking to get an Ender3 for terrain pieces and larger prints. My question: the upgrades you had laid out, are those for the Ender as well? Or, are there different ones for the smaller printer?? Thanks for the video and info!!

[@FranklyBuilt]

Actually 99% the same! Just different bed sizes is all!

[@Klaymour28]

@@FranklyBuiltThank you for the reply!

[@techsavvyhero]

Totally agree that working with a base model as a beginner, then making the necessary upgrades/replacements teaches you way more than using a fully tricked out model out of the box. The latter is best for experienced users who already know what the improvements do.

[@oliverhenwood6516]

Talking about this, I have a Ender 3 which basically upgrade parts through out (BL Touch, New Hot End, New Motherboard, New Extruder e.t.c) Do you think the pro would be better as i can take the things ive learnt from that?

[@stevankaighen5009]

I like your perspective and I’m hoping to get things set up so that I don’t have to worry about settings anymore. Right now I can’t even print PETG cause of the nuances associated with the material(second month maker) Love your lab and your work is awesome.

[@SimonPlatten]

Hi Frank, I have a Creality CR-10 Max, which I've had for just over a month, so far I'm having lots of problems, I haven't managed to print anything except a bunch of failures, the rafts print fine, then then model starts to print, after a couple of mm of printing the model, the raft detaches from the bed and I just end up with balls of PLA mess....the settings I'm using Bed: 60, Nozzle: 200, can you help?

[@FranklyBuilt]

Did you turn off Eco mode?

[@SimonPlatten]

@@FranklyBuilt yes, I’ve also set the hot bed temp to 70… it seems to be printing ok atm, further than before presently 39% which is way better than before, also changed print speed to 50

[@SimonPlatten]

Next issue and learning all the time … having printed a model which took 15 hours the support material is almost impossible to separate, will try again and lower the support percentage

[@SimonPlatten]

I returned this printer and got a CR10SPRO v2, it lasted just under 2 months. Waiting for creality to give me a returns number. Not impressed.

[@1ZombieMan1]

In my opinion the upgrades are part of the hobby if you’re treating it as a hobby

[@Pajake570]

Love your video. Very informative. Yet i'm still struggling on which one to get. Now it seems to be between the ender 5 plus and the cr10s pro v2

[@caseymcdonald5171]

Same...

[@Pajake570]

@@caseymcdonald5171 I went with the cr10s pro v2 and love it. It already has all the upgrades he speaks of in this video

[@jordanray6506]

Thinking I'm gonna get the 10s and upgrade it but I cant find the ultrabase bed for this printer. The link you posted sent me to an ender bed. Any help on where I can find it for the 10s?

[@FranklyBuilt]

Amazon. Search cr10 ultra base

[@jordanray6506]

@@FranklyBuilt I actually found a 10s pro v2 on Ebay for 470. What are thoughts on a pre owned printer for a beginner? Thanks for the reply btw!!

[@FranklyBuilt]

For your first printer? Highly discourage it

[@JJbm4233]

I bought a Ender 3 S1 and I’m looking to get either a Ender 3 S1 pro or CR-10 S pro v2 if I can install a creality direct drive sprite extruder on it. I went for works out of the box making great prints.

[@bigjoelowstudio6419]

I agree I have an end at three because I didn’t know about the pro version or version two and I think my end at three and I’m morning about it I am upgrading the extruder gear to dual extruder gear and PVS tubing the blue tubing because my stock tubing for the filament clogged up in the tube so in the future I might get a C10s Version and angel my food panda in the 3-D printing community but thanks for letting me know about the upgrades I can do to make to my ender 3

[@mateuszmiler2160]

I will go for upgrades, does anyone have link to all in upgrade on blue CR10 ? Its best I sam so far....

[@tekka1774]

Yoo I see that Final Fantasy SOLDIER sword on the ground👀

[@FranklyBuilt]

Iron blade buddyyyyyy

[@fenrirAWOL]

hey, so I'm in Australia and for some reason, I can't get the Creality CR-10s Pro V2. The best I can get my hands on is the CR-10 Smart Pro. Can anyone tell me the difference between the two?

[@bennettmartella8831]

Hey there I got an ultra base bed, but nothing is sticking, it is completely level, what do I do.

[@FranklyBuilt]

How are you cleaning it? And is your nozzle close enough to the bed?

[@bennettmartella8831]

@@FranklyBuilt windex, and it is close enough

[@FranklyBuilt]

Use isopropyl alcohol

[@yorkshirerapper83]

great video, to the point. I'm struggling to find a tutorial on converting a standard cr10 to an all in one, any useful links? Thanks

[@SqualidsargeStudios]

i started off with an ender 5 pro. so i learned my bed leveling with that ol thing. tho i did upgrade to a cr-touch after 4 months. now i also have a E5 plus. they are a couple of pain in my ass machines. but i do love em

[@bw29]

You've convinced me it's time to upgrade my basic CR10. I've ordered capricorn tubing, bed springs, aluminum extruder assembly, and a secondary z axis lead screw kit. My brother bought me a BLTouch this past christmas that is also waiting to be installed. I have one question though, where did you find the files for that all-in-one upgrade? I have been looking everywhere and found a couple similar, though designed for upgraded boards/screen. It looks like you re-used the stock screen so I'm very interested to see if it's an all stock parts conversion.

[@FranklyBuilt]

That’s awesome haha and the link is below in the description I think

[@bw29]

Wow, I could have sworn I checked...but there it is! Thanks!

[@Aagggyy]

How did it go for the all in one conversion? There seems to be no instructions for it.

[@bw29]

@@Aagggyy I haven't gotten around to attempting it for the same reason. I've done all but the secondary lead screw for upgrades then got busy. I still want to do it, but it's a little daunting without at least some basic instructions. Helluva jigsaw puzzle I guess.

[@Aagggyy]

@@bw29 Yeah, I see no instructions and I am confused asf since there’s no video on KZbin about it.

[@ceskgalaxycreations2751]

what's a good printer for out of the box ready that's smaller than the CR Series. I keep hearing that the Ender 3 takes a lot of work, I'm not trying to fix printers I just want to print a few things to connect to my clay sculptures

[@FranklyBuilt]

Voxelab Aquilla. I have a video on it now too