Franks Double Pole Update.

  Рет қаралды 18,976

TheZachLife

TheZachLife

Күн бұрын

Пікірлер: 140
@bluikkso
@bluikkso 17 күн бұрын
Pumped to hear this contraption gets another life & we get along to see it, thanks.
@johngaither9263
@johngaither9263 6 күн бұрын
My father was a petroleum geologist and I kicked around seismic crews for 15 years. I saw a lot of shot hole drilling rigs and work over rigs, but I never saw a combination work over/drilling rig. There must be a reason because original ideas are as rare as hens teeth and someone is bound to have had this thought before you.
@kentkeller5211
@kentkeller5211 6 ай бұрын
I worked for oil company that had a,Frank's rig mounted on a 1948 Ford truck. They bought it new. It had a,little turntable and a mud pump. It had 2 Buda motors powering the rig. It was only a single. A gentleman delivered it to Kemmerer Wyoming from Tulsa Oklahoma. That rigs top speed was about 40 mph. Rumor has it he crawled out of the rig and ran to the train station. He had enough of that rig on rough dirt roads.
@TheZachLife
@TheZachLife 6 ай бұрын
haha
@diesellivesmatter
@diesellivesmatter 6 ай бұрын
Oldest known data I've worked on was a 1945, of course is was on a truck from the 90's
@drallen888
@drallen888 6 ай бұрын
This is what I've been waiting to hear ever since you rigged it down and drug it out . Can't wait to see this happen.
@wornoutwrench8128
@wornoutwrench8128 6 ай бұрын
I think the very first video of yours I ever watched was Franks rig, I subbed after that. Good ole Jeff. Love that guy. I can't even remember how many years ago it was, I sent him a scale model of a Cat 245, I figured he would make more use out of it then me. Love seeing it on his shelf when he is sitting there talking with them behind him. As far as the rig goes, I do believe if anyone is going to get it running it will be you. Great channel Zack.
@TheZachLife
@TheZachLife 6 ай бұрын
Haha thanks.
@Mike33w
@Mike33w 6 ай бұрын
Looking forward to this project.
@mevinson
@mevinson 2 ай бұрын
Zach, as an amateur electrical nut ( who also watches Carlson's Lab ) making a lightening suppression rods around my well rigs would become a priority to me. Seems like you could come up with a homemade system sorta like what space x and nasa has on their launch pads to draw lightening strikes away from their rocket ships. This could be a great project for ya'll tubers! Just saying!
@zanereese4796
@zanereese4796 6 ай бұрын
I like your drilling rig idea. I broke out on a Cabot 900, built in Pampa, very similar to what you are thinking. It was an overgrown well service rig on a Crane Carrier, and a separate skidded sub with rotary table that we backed up to. Two 12v71's with Allison Automatics, we drilled to 10,500' with 4-1/2 dp. Also, Walker-Neer built combo spudder/rotary rigs like you are thinking.
@birddog9201
@birddog9201 6 ай бұрын
My first year running a rig in East Texas I run a double triple three-legged Frank’s. That was like 15 years ago and was one of my favorite rigs along the way.
@RustyorBroken
@RustyorBroken 6 ай бұрын
Hell yeah! I'm self admittedly nostalgic and sentimental. I'm all for bringing old iron back to life. Nothing more rewarding than seeing her eat again. I look forward to the video of that machine operating. No doubt she'll get right down and haul the mail.
@TheZachLife
@TheZachLife 6 ай бұрын
Me too lol
@peterhodgkins6985
@peterhodgkins6985 6 ай бұрын
Man, I'm tickled to hear that you're gonna resurrect that ole rig! I have an affinity for bringing old abandoned stuff like that back from the edge, and your project makes it sound even better by giving the thing not one, but TWO new leases on life! Thanks for the update, Zach!
@garyhoward3123
@garyhoward3123 6 ай бұрын
Look forward to seeing this project shape up. I have a Schramm rig been spending money on for some time now. Planning a trip across Oklahoma and Texas panhandle next month and look forward to seeing oil country again.
@glbaker5595
@glbaker5595 6 ай бұрын
Not so shocking when you consider it's only a small world for competent people who can do really good things,,, that's why I want you I enjoy seeing bright young men who can think for themselves,
@steveladner4346
@steveladner4346 6 ай бұрын
Work over rig is handy as a pipe wrench to a man that owns several wells.
@richspillman4191
@richspillman4191 6 ай бұрын
Thanks for explaining the difference between servicing and drilling rigs.
@gonzo_the_great1675
@gonzo_the_great1675 6 ай бұрын
I keep finding I bump into the same people, or linked people all the time. It is actually a big world out there, but there are a lot of small circles within it.
@danger3_255
@danger3_255 6 ай бұрын
can't wait to see more of the widow maker! zach, wear a hard hat, buddy.
@voxromantic3340
@voxromantic3340 5 ай бұрын
My grandfather built a rotary table for a work over rig. He couldn’t afford a swivel at the time. It was made out of a truck rear end..
@brucekelsch5080
@brucekelsch5080 6 ай бұрын
I worked on a cardwell 250 that had a drilling substructure that tied into the drivetrain on the rig. Simply backed into the sub. Worked great. Didn't need a ramp.
@grimey88tx
@grimey88tx 6 ай бұрын
Ditto. I've worked on Cardwells like that, and helped build an Ideco rig like that in WV back around 1978,. We built about an 8' substructure, chain drive rotary table that hooked up to a shaft on the rig. Part of the substructure base was a large beam that mated with the base of the derrick. No ramps necessary
@jonnojamwood
@jonnojamwood 6 ай бұрын
Thank you sir👍🇦🇺
@paulgoolsby6120
@paulgoolsby6120 6 ай бұрын
Old school never goes away. Best ideas always start with practices from the past. 👍
@TheZachLife
@TheZachLife 6 ай бұрын
100%
@aaronguffey6353
@aaronguffey6353 6 ай бұрын
Glad you are saving it i would. A nice hydraulic drive will make good for the table. I put all the components together for a fellow a few years ago with the same idea.
@kevinkoepke8311
@kevinkoepke8311 6 ай бұрын
I'm glad you decided to keep and work with this rig. Looking forward to seeing it done. Thanks, Zach!
@riverrat2592
@riverrat2592 6 ай бұрын
I'm always looking forward to your' videos!
@DetroitDiesel671
@DetroitDiesel671 6 ай бұрын
I love the drill rig... even if it didn't make the most sense from an Oil Man's perspective, that crusty old thing is KZbin Gold. That and dipping your arm in PCB transformer oil, lol.
@demartin5366
@demartin5366 6 ай бұрын
Hey Zach, so glad to hear that you are going to get your rig going. I can't wait to see your video series on this project! You've got some great ideas for it for sure. It will certainly be a nice workover rig for your leases, you will be saving a lot of money that way. If your looking for a vacation idea, how about taking your RV out to Midland, TX to the Permian Basin Oil Field Museum. It would be a great setting for your RV. I have been out to this museum several times and never tire of it. Of course, you may want a vacation away from the oil fields, just an idea. Enjoy your vacation.
@misterbacon4933
@misterbacon4933 6 ай бұрын
I can't wait for your new vlog about this project! Greetings from the Netherlands!🇳🇱👍🏼🇺🇲
@mcd5082
@mcd5082 6 ай бұрын
Can’t wait to see what that truck can do! Jay pay dirt is great! Thanks for sharing
@mitchberryman7690
@mitchberryman7690 6 ай бұрын
Man that office looks clean Awesome video can’t wait
@davidschwartz5127
@davidschwartz5127 Ай бұрын
Enjoyed!
@greggb1416
@greggb1416 6 ай бұрын
Look forward to the video series. Get that vacation planned, and go…! Thank you sir.
@RuralTowner
@RuralTowner 6 ай бұрын
8:45 Um...thanks? 😋 Had to turn captions back on to be sure I heard right. Didn't know I was a machinist...never got the chance start learning any of it though do have the lathes. I can weld well enough to make things stick together but that's about it.
@sallybrokaw6124
@sallybrokaw6124 6 ай бұрын
Feller locally here had 4 or 5 Bucyrus-Erie water well drilling rigs that set up on the ground like you were describing. He retired from that business and sold the rigs several years ago. AL B.
@tadeuszczernia5422
@tadeuszczernia5422 6 ай бұрын
Make sure you record the whole project. This would be really interesting to see. Good luck.
@johnparker221
@johnparker221 6 ай бұрын
Love your vids. It is good to see you plan and sketch. You come up with interesting plans and ideas.
@mepoweme
@mepoweme 6 ай бұрын
Zach, the best inventers are Men with an idea and limited money.
@budc865
@budc865 6 ай бұрын
Looking forward to seeing the rig progress.
@TechOne7671
@TechOne7671 6 ай бұрын
Stroll on Zach, that sounds good, what a project. Try to keep all your work in-house, we used to do everything in house but about 15 year ago we got rid of half our men and subbed the work out. Now we have had enough of cowboys and the like and are now bring the work back in-house. I look forward to the rig videos. All the best.
@scrapperstacker8629
@scrapperstacker8629 6 ай бұрын
Cool rig!! Looking forward to seeing it running.
@nickpopelka
@nickpopelka 6 ай бұрын
Thanks for taking time to make these videos bud know your a busy guy
@TurboDog73TX
@TurboDog73TX 6 ай бұрын
I'm looking forward to see it working like You intend!
@horatioyen256
@horatioyen256 Ай бұрын
Yay a drilling and service rig is going to be so cool going to dril some wells?
@Damien.D
@Damien.D 6 ай бұрын
When Zach (literally) drag that rig out of the field it was rotting on, I instantly thought there was no way he would cut it for scrap. I'm glad I was right. This big old stuff asked to go back to work when it came back to life years ago.
@TheZachLife
@TheZachLife 6 ай бұрын
Yeah I think I kinda knew but didn't want to convince myself lol.
@patmccauley3885
@patmccauley3885 6 ай бұрын
This will be a fascinating project to watch and another challenge for you to create
@Harold-si7eh
@Harold-si7eh 6 ай бұрын
I forgot to mention about a update on the silver/gray Ford Dually pickup! Thanks for the update on Mack,Rig!
@BedeMeredith
@BedeMeredith 6 ай бұрын
use a old flat bed of some sort as the platform, , back the rig up onto the flat bed structure, add a hydrolic ramp to level the rig truck, and clamps to fix the structure to the rigs frame. looks like a solid plan.
@markgreen7701
@markgreen7701 6 ай бұрын
Looking forward to this series!
@garrison3675
@garrison3675 6 ай бұрын
HOO-RAH !! ... looking forward to another project in The Zack Life ... keep on pump'n that Texas Crude !!
@stevetaylor1593
@stevetaylor1593 6 ай бұрын
Wow.. this will be a great series. Looking forward to it Zac.
@jd-ku3iw
@jd-ku3iw 6 ай бұрын
Thank you for the update 😊
@jakebreak8917
@jakebreak8917 6 ай бұрын
Another great video! Keep it up!
@carmon5229
@carmon5229 6 ай бұрын
🔥🔥 Badass Can't wait 🤘🤘
@jeffrogers8314
@jeffrogers8314 6 ай бұрын
might be a substructure and dog house from days gone by was for doing reentrys with a well servicing rig guy who owns it has sold rigs and is getting out located in perryton tx I'll chk tomorrow see if its still there
@richardlincoln8438
@richardlincoln8438 6 ай бұрын
As with most all of Your projects Zach, this work-over/completion/drilling rig , seems like a sound financial endeavor . The only rat sign in the oatmeal is, as You mentioned, hiring people that know the difference between their rump and a hole in the ground. Know what the hole is, what it does and how to make one or maintain one. I could launch a diatribe about how we built a drive on sub-structure for a truck mounted Garner Denver extended derrick 1500 , but i'm going to show mercy by shutting my pie-hole. Best Wishes to You and Your Family, hope Y'all enjoy the vacation time.
@TheZachLife
@TheZachLife 6 ай бұрын
Thanks. and yes I agree.
@dxopermian
@dxopermian 6 ай бұрын
The best guys I ever had didn't know anything at first. Now they can do anything
@nigelsears7191
@nigelsears7191 6 ай бұрын
always enjoy your vids , was wondering what was the plan with that rig all is now clear , keep em coming
@wilco3588
@wilco3588 6 ай бұрын
That sounds like a great idea to make a combination rig . would the table and structure be on wheels ? airbag them up or pin in your axles and move it? Or is it a slide off big trailer type item?
@SkylarMiller97
@SkylarMiller97 6 ай бұрын
Do you plan on having BOP‘s underneath your rotary? Or at minimum an annular. And as far as the rotary goes, I would personally go with hydraulic over diesel, similar to the style that you would find on a standalone snubbing unit. You will be able to adjust torque and RPM’s precisely.
@SkylarMiller97
@SkylarMiller97 6 ай бұрын
I would also recommend integrating a flow cross under the rotary With 1502 iron ports out each side of it.
@SkylarMiller97
@SkylarMiller97 6 ай бұрын
But in all actuality, it would probably be cheaper and more efficient in the long run to get a top drive power swivel for it. it would eliminate some of the issues that you will run into having a bottom drive rotary with the blocks.
@tinyskustoms
@tinyskustoms 6 ай бұрын
looking forward to new videos! always good stuff.
@JJ-jv1gu
@JJ-jv1gu 2 ай бұрын
Zach, FABULOUS VIDEO Fix that #BigPig fuk the paint, chrome don’t get ya home Keep it West Tejas Gangster Style
@andygulick6085
@andygulick6085 6 ай бұрын
good luck on the project
@WACRE44
@WACRE44 6 ай бұрын
Keep up the good work 😎
@Orbacron
@Orbacron 6 ай бұрын
16:13 an equipment drop trailer could be the base to build this setup you back onto. Just need to move it with an old semi truck to location
@kc033056
@kc033056 6 ай бұрын
Good job. I know it’s a lot of time to film and publish these videos, keep up the good work. Kc
@TheZachLife
@TheZachLife 6 ай бұрын
Thanks.
@dannywilsher4165
@dannywilsher4165 6 ай бұрын
This is going to be interesting!!!
@Lucky4wd4840
@Lucky4wd4840 6 ай бұрын
Hi Zach, We also watch Jay! I will enjoy watching you do the WOR! We had some rigs use top drives on WOR when they deepen wells in the Austin Chalk! They also air drilled some wells deeper with WOR! Do you have any SCDA damage from lighting! That's what I did the last 17 years I was in the oil patch!
@tylerrenick7157
@tylerrenick7157 5 ай бұрын
I bet that welder likes red, a lot!
@TheZachLife
@TheZachLife 5 ай бұрын
Haha you must know him lol
@tylerrenick7157
@tylerrenick7157 5 ай бұрын
@@TheZachLife yes sir he does awesome work. He has fixed a few absolute disasters for me.
@markk6957
@markk6957 6 ай бұрын
Now could you use two low bed trailers side by side with sub structure to 36" . So you'll have a 16' x 40' ish platform for rig,turn table , rigging. Set up would be easier if the turn table with motor was mounted one while the other can hold tanks, rigging, and more.
@kennardjohnson7875
@kennardjohnson7875 6 ай бұрын
No you are thinking, and you should go for it, you could find a Derrick and substructure. You see stuff laying around every where,even Kansas.
@corydriver7634
@corydriver7634 6 ай бұрын
5 by 5 two-bin.😂
@AnthonyStankiewicz
@AnthonyStankiewicz 3 ай бұрын
So look!!! On the main supports to the wrig, and even the frame... Do, density / material thickness, ultrasonic. meter is used in welding and it gives you metric material thicknesses in welding inspecting. Inspect the main supports and cross members, go from there, or cut out carefully and replace parts by welding and done, lol 😊😊😊😊🎉🎉🎉🎉🎉🎉🎉😂😂😂😂😂😂😂
@restaurantattheendofthegalaxy
@restaurantattheendofthegalaxy 6 ай бұрын
Will that built up / wedge piece have wheels on it or how else would you get it down the road?
@jasonbillings7997
@jasonbillings7997 6 ай бұрын
Ready for workover rig videos now
@diesellivesmatter
@diesellivesmatter 6 ай бұрын
There's lots of double triples coming up for sale I'd buy one of those, you can convert yours to a single pole rig and make it very handy and use a rig that has plenty of pulling power 70t+ instead of a 50t rig.
@lyndellucas161
@lyndellucas161 6 ай бұрын
You remind me of me bud, It cant be done !!! Hold my beer and watch this.
@dimbag1
@dimbag1 6 ай бұрын
Awesome
@brianmoore5498
@brianmoore5498 6 ай бұрын
interesting content. I think we may be heading to a point in time where you actually drill a well. that would be quite a thing!
@scrapbmxrider16
@scrapbmxrider16 6 ай бұрын
Where you at? I thought you were perma basin but then you said witch falls and all the darn rain
@jlo7770
@jlo7770 6 ай бұрын
Oh man... you aint put any turn buckles on the H base? I hope you aint pulling much weight? And you gotta make sure therig is straight or youll twist the derrick. Atleast thats how tripple doubles work. As far as the sandline drum. The way ive rigged up/down, on franks as well. Theres no "handle" at the swab stand (swab stick) it should be a ratchet type handle with a release that lets you release the brakes/engage them. You just set the handle to the middle so the derrick can scope/come up and the hydraulics will release some sand line but the brakes will slightly grab so it doesnt free spool. Rigging down you select the highest gear clutch in the sandline and set the brake to that middle spot where the brakes are grabbing but the gearing is so high that it wont rip the derrick down/over. Ive never had to have 2 people on the carrier rigging up/down other than when im ready to break the derrick over. When you rig her up and down enough times you know exactly where you need to put your blocks to make sure the blocks dont rip stuff up and the sandline does what you want/need it to do. When i broke out on a franks we use to "hang" the blocks there was a place in the derrick where there was a chain and hook that wed loop into the top of the blocks then let the let some drill line out to the half moods on the back of the derrick then lay the derrick over. I went to another company and ive never done it since cant remember if that was a franks thing or a the company i worked at thing but if you have a thin piece of metal in the back of the derrick so the blocks can slide up the derrick as you lay the derrick over you shouldnt have to touch the handle again. It makes rig up/rig down way faster and easier. Im not an engineer by any means but i do know rigs in and out, atleast trip doubles and your old girl looks the same just smaller, ive worked around a lot of really good user friendly set up rigs and rigs that were horrible to work with, ive worked on a service king sk1000 8 line 118' tripple double, a falcon 8 line trip dub that was either 118 or 112' derrick. Ive worked on frank with 98' derricks where you damn near crown out every time you pull a hang. I also know some old timers that love to shoot the sheet and have built rigs from the ground up. Engineering side i most likely wont be able to help you but set up side, man feel free to let me know ill shoot ya an email and give you my number and i can help with anything and if i dont know i know people who will know. I aint looking for handouts or shoutouts just one fellow oilfield trash hand to another. One thing ive learned about the oilfield is the more people you know the more information you can get, and sometimes a phone call can save a ton of money, especially working on rigs
@AnthonyStankiewicz
@AnthonyStankiewicz 3 ай бұрын
P.S..... Always go up on thickness of material and not down...😊😊😊😊😊❤❤❤❤❤
@roberthillyer2888
@roberthillyer2888 6 ай бұрын
Zack , i suggest thinking about a railroad gondola car. Some have low side and some higher. Flip it upside down and cut down the center beam. They are more than heavy enough, and you can buy them for scrap price. Im not sure the width maybe 12 feet wide. I think this will give you quick ideas.
@TheZachLife
@TheZachLife 6 ай бұрын
Interesting.
@wesleyhayes3100
@wesleyhayes3100 6 ай бұрын
Worked on many of the rigs your trying to build. Both drilling and work over .
@ravenbarsrepairs5594
@ravenbarsrepairs5594 6 ай бұрын
As you've got a growing KZbin channel, Video's of the rebuild/resurrection of the rig will also be a income stream. Prehaps some collabs with some diesel/mechanical type other channels would also be beneficial to both channels.
@TheZachLife
@TheZachLife 6 ай бұрын
Yeah I might. Thanks.
@mike97525
@mike97525 6 ай бұрын
thanks Zach😎😎
@turtulara
@turtulara 6 ай бұрын
Remote control will keep you out of line of fire, give mobility to work around while you drilling, they don't cost much now days and work perfectly with hydraulics which you have to use for all functions
@michaelmcclure8673
@michaelmcclure8673 6 ай бұрын
Zack could you build that platform like those portable tanks , it has a axle at the rear and you pull the front up to lock in the fith wheel ? 🤔😊
@itsjustmeinidaho
@itsjustmeinidaho 6 ай бұрын
Your awesome
@shignig383
@shignig383 6 ай бұрын
Why not run a xk 90 power swivel we drill out plugs outta laterals then your not dealing with a bunch more moving parts kinda a hybrid top drive rig for shallow wells
@Deepakshrikhandesir
@Deepakshrikhandesir 6 ай бұрын
Best Wishes to all of you Students ❤ Deepak Shrikhande Sir DME DBM DNDT DHFSM FIRE SEFETY INATRUCTOR NAFS GOV APPROUVED EX BARC INSTRUCTOR MUMBAI ❤❤❤
@Vernon-Chitlen
@Vernon-Chitlen 6 ай бұрын
Got your eyes on a place to poke a new well?
@robertschemonia5617
@robertschemonia5617 6 ай бұрын
Zach, if i weren't stuck in the armpit of the midwest, Southern Illinois, I'd come down there and harass ya into letting me help you pull a well or do some of the awesome stuff you do in the field. I have had a lot of very strange jobs, from literal gravedigger, to hot tar roofer, tree trimmer, mechanic, industrial maintenance and repair like the wiring in the control boxes for your wells, and now I work in a scrapyard. My job is a welder, but I do everything except buy scrap. I run the big machines, fix them, fix all the balers and electrical stuff and all of it. I reckon my job is just "fix it" lol.
@TheZachLife
@TheZachLife 6 ай бұрын
Haha sounds about like me. Just fix it lol.
@robertschemonia5617
@robertschemonia5617 6 ай бұрын
@@TheZachLife Thats it! FIXITFIXITFIXIT!!! lol
@Michael-B41
@Michael-B41 6 ай бұрын
could a guy build the sub structure to be pulled like a trailer you know double axle that would drop and lift make it easier to move to location?
@TheZachLife
@TheZachLife 6 ай бұрын
Something like that is possible.
@AnthonyStankiewicz
@AnthonyStankiewicz 3 ай бұрын
Okay well how much would you potentially pay, and if was accepted then were to stay temporarily then maybe live, maybe. Can send resume and go from there. Oooh, I got it give one shop to stay, and go from there..... lol 😊😊😊😊😊
@diesellivesmatter
@diesellivesmatter 6 ай бұрын
Franks 658 is rated to drill around 4000' maybe up to 4500 irc
@naggle
@naggle 6 ай бұрын
250$ a hour. I wish. Service rigs here are like 550$ per hour
@AnthonyStankiewicz
@AnthonyStankiewicz 6 ай бұрын
Because it's about swabbing; production gets lowered over time because oil, can clog like cholesterol in your veins, so swabbing increases oil production because it can clear the veins for the oil to flow.. I'm sure that that is exactly what that machine can do, tell me how it feels to get a few wells cleared and is it better????? 😊😊😊😊😊❤❤❤❤
@mariuszwieloch9137
@mariuszwieloch9137 6 ай бұрын
Życzę powodzenia
@564df6g5h4d6f5g4h6d5
@564df6g5h4d6f5g4h6d5 6 ай бұрын
Cool stuff
@floridanick
@floridanick 6 ай бұрын
Have a great week Zach
@TheZachLife
@TheZachLife 6 ай бұрын
Thanks. You too
@brandonrumley8322
@brandonrumley8322 6 ай бұрын
When you build your substructure why couldn't you make it so it is like a trailer that the duels are on hydraulic cylinder and cand raise and lower themselves to transform to be able to put down the road and if you are creative you could also make it hydraulically and to widen at locations and shrink to pull down the road to avoid wide load permits?
@TheZachLife
@TheZachLife 6 ай бұрын
Something like this may end up happening.
@diesellivesmatter
@diesellivesmatter 6 ай бұрын
There's companies that use double triples to drill with, back onto a sub and drill it down.
Construction of a Mountain-Side Getaway Home
1:59:56
Perkins Builder Brothers
Рет қаралды 10 МЛН
A Dream He Was Determined To Finish!
33:23
Neil Koch: Dig-Drive-DIY
Рет қаралды 206 М.
Andro, ELMAN, TONI, MONA - Зари (Official Music Video)
2:50
RAAVA MUSIC
Рет қаралды 2 МЛН
번쩍번쩍 거리는 입
0:32
승비니 Seungbini
Рет қаралды 182 МЛН
The Sweatiest Job On The Farm
30:13
Laura Farms
Рет қаралды 490 М.
Ya'll Were Right.
18:06
TheZachLife
Рет қаралды 44 М.
Moving the LAST 50 Ton Mine Locomotive w/ CAT 992 loader
5:39
American Industrial Mining Co.
Рет қаралды 22 М.
Studebaker Champion Parked 47 Years - Will it RUN AND DRIVE?
1:42:08
Vice Grip Garage
Рет қаралды 4,8 МЛН
Transformer Guts
20:29
TheZachLife
Рет қаралды 103 М.
Epic Dam Busting To Flood The 9 Acre Pond!
46:23
letsdig18
Рет қаралды 363 М.
$40k Hiccup on the New Lease Injection Well
17:32
TheZachLife
Рет қаралды 18 М.
BUILDING A LEAN TO CARPORT // Start To Finish (Part 1 of 2)
29:26
Andro, ELMAN, TONI, MONA - Зари (Official Music Video)
2:50
RAAVA MUSIC
Рет қаралды 2 МЛН