Free EVE-NG Lab | Free Home Lab | Palo Alto LAB | Detailed Explanation Steps by Steps

[@sss-bbb]

Man You Are Expert

[@mdmasumreza5360]

Thanks Bikash, you are doing an awesome job

[@RyanBess]

Please keep going. Setup an HA environment with 2 Palo’s

[@jaydipparmar5653]

Hi Bikash, just a comment, earlier you connected cloud 0 to ethernet 1/1 on palo and then you replaced to ethernet 1/1 interface with management 0 internet, that's why you got DHCP IP assigned, it took me time to figure out how you got it, but this was helpful. thanks

[@saurabhmittal2290]

This was helpful

[@guruswamy9119]

Thanks for wonderful vedios PA kindly share LAB manual if you have .

[@rajamourya7867]

Hi, at 23:20 virtual network editor. On my side it's not showing VMnet information - bridge and PA only cli access is working but for gui not showing dhcp IP in PA. Please suggest

[@keciapittman9833]

Youb are that Guy and I love you

[@rajamourya7867]

Hi sir, Palo Alto gui access is not working. PA is not taking dhcp IP. Please suggest

[@augustbernard3396]

FYI, when adding the cloud connections to the firewall, be sure the firewall is stopped!

[@BikashsTech]

Yes in eve-ng community version, but eve-ng pro version it is not required

[@augustbernard3396]

@@BikashsTech thank you for the clarification! And for all of the great videos!

[@augustbernard3396]

@@BikashsTechfyi, your patreon link doesn’t appear to be working for me. 😢

[@BikashsTech]

@@augustbernard3396 you can join the membership of channel.

[@suhask2597]

Hi Bikash, Much appriciated and really helpful video i started following your video and finished 10 videos . But i am not able to install . Problem statement : when i turn on the PA or any device it is not getting started or turning blue from grey kindly suggest me naming is proper reinstalled 3 times still not working

[@rushikeshpatil1983]

1) make sure your BIOs has virtualization is enabled 2) Enable the same under Vmware >system acceleration .. select nested VT/Amdx

[@abhilashvarma3989]

@@rushikeshpatil1983 hey buddy can you elaborate it

[@summertyme5748]

I have every component working but one thing I have not been able to solve. Poor network performance from Windows 2019 qcow images. I’ve tried the Virteo network drivers. Didn’t help. Note EveNG speed test from command line pulled several GBS per second. But Windows running inside eve isn’t more like 56K. I mean it’s unusable. I can’t even download chrome browser as it takes hours. Is there a solution to poor Windows performance for networking when running inside Eve-NG??

[@BikashsTech]

Hi summer, You can connect the server directly to cloud0 so that internet would be faster.

[@MrRome32]

Hello Sir, Thank you very much for sharing this video!! I was able to boot up the PA. However, As soon As I turn on the FW the CPU reaches 90%. I dont know if I am missing something. Any idea will be highly appreciate it.

[@BikashsTech]

Thanks for comment. Hi Luis, When we start palo alto the cpu will go 90% but after sometime it will come down. But you PC should have minimum 4 cores and 6 GB of RAM. How to check the cores and ram. I have showed in my video. kzbin.info/www/bejne/jHSZqmyvbb12hZI

[@arunvrg9055]

@@BikashsTech What is the password

[@narayanasrikarbonda4634]

as you mentioned we need to wait for 5 min before we enter credentials to PA. After waiting for 3 - 5 min, PA is rebooting kindly help

[@BikashsTech]

In that case, if you have wipe out the device and try to start

[@thakermahek2501]

Sir/all, i successfully download file rename it but when as per standards but when i open my eve ip through Chrome and add node it not showing Paloalto 100 and like any devices, kindly help me out i just get irritated now. 😩😅

[@paroray7541]

Hi thank you for such awesome videos can u plz share what is the network adapter settings u used for eveng by default it is set to bridged(automatic)

[@UPBiharVillagelife]

Hi sir, eth0 Link encap:Ethernet HWaddr 50:00:00:03:00:00 inet6 addr: fe80::5200:ff:fe03:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:1968 (1.9 KiB) error is comming when start the palo alto in eve ng

[@manvivyas1663]

Do you have paid course?

[@balamuraliganeshapandi2304]

Thank you❤😍

[@860726265041]

HI @Bikash I have done importing image as your guidline, but when i start the device, it stuck at below prompt, and nothing happens after that. I even did "unl_wrapper fix permission". The image size is same. Can you please help. ------- Booting 'PANOS (sysroot0)' root (hd0,1) Filesystem type is ext2fs, partition type 0x83 kernel /boot/vmlinuz ro root=/dev/sda2 init=/sbin/init_single_core console=ttyS 0,9600n8 console=tty0 quiet alternate_root=/dev/vda2 alternate_root=/dev/xvda2 hugepages=0 [Linux-bzImage, setup=0x3c00, size=0x393870] ----------

[@abhimakkar0025]

Hi, checked all things but palo alto is not getting started. Please help me out with the issue.

[@abhimakkar0025]

the palo alto machine is now in the vm. I am able to see the machine but when i click it and wanted to start the node, it doesn't start.

[@jagatjyoti1]

Hi , Thanks for the video but I can't go further .The password is not accepting .I waited for a hr now. But still it stuck in "old pwd" then "new pwd" then "confirm pwd" ,finally back to PA-VM login:

[@arendkolk1]

Hi, as soon as i turn on the firewall and open console it shows Critical error. Entry Reason: FIPS failure. any idea?

[@rahuselva638]

For cisco IOS image which one I need to download from this. . .

[@Kuch_Bhi_1908]

Username and password not taking admin admin after multiple attempts ... Even i tried after 10mints also .. it is showing login incorrect... Any idea abt this

[@BhanuPolavarapu]

i am not able to start palo alto, it is not getting started

[@shayannasir8803]

Thank you for sharing these informative videos, i followed all process but after successful boot up, i dont see any interface on cli, even management interface is not showing. anyone has same issue ??? i have panorama running on same eve environment and showing all interfaces.. i tried different versions but same results

[@wally19]

same here. I'm able to use the gui, do a login but even if i add the ip, dg and dns i cant connect to anything from or to it. Its the only device that is not getting the ip by DHCP from cloud so it must be something related to this device only. Have you been able to solve it?

[@balajib1125]

Hi installed evng and pan os but unable to get ip from dhcp please support

[@BikashsTech]

How you palo alto is connected. Have the taken network cloud with cloud 0

[@narsingrao6904]

hi bro, unable to open in browser with ip address, plz tell me what is the issue

[@BikashsTech]

try connecting to MGMT interface to PC and give IP address and check.

[@lvreddy8237]

Can't we run paloalto with google cloud GCP account ?

[@BikashsTech]

Thanks for comment. Hi Reddy, Yeah we can do it.

[@lvreddy8237]

@@BikashsTech can you please make a video on how to copy PA image to GCP please sir

[@BikashsTech]

@@lvreddy8237 please follow below video kzbin.info/www/bejne/m6iUnaGhjqmer5I

[@lvreddy8237]

@@BikashsTech sir PA image not opening after transfer like not turns into blue...what might be the issue

[@lvreddy8237]

@@BikashsTech by following this videos only I created GCP account thanks...and I can able to access routes..but not PA

[@BillyMondragón-d9z]

what is the password ?

[@vincekimcostales6658]

Useless, we need version 10 above