Рет қаралды 1,335
Well in my next instalment on this Freewing Banshee, I perform the assembly. The Assembly of this Freewing banshee could not be simpler. 11 screws is all it takes to assemble this plane. No surprises other than if want to test the ESC you will need to power the yellow reverse wire also.
Here is a non affiliate purchase link and plane specs:
wingspan 900mm / 35.4in
Length950mm / 37.4in
Weight780g (without battery)
CG (Center of Gravity)64mm from the leading edge of the wing root
Power System 2840-2850Kv Outrunner Brushless Motor
Speed Control 40A, internal SBEC with XT60 Connector
Propeller / EDF 64mm 12-Blade EDF
Landing Gear Fixed main landing gear, steerable nose gear.
Required Battery 4S 14.8V 2200mAh with XT60 Connector
Required Radio 6 Channel 2.4ghz radio
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps Yes
Lights No
Hinge Type Nylon hinges on all control surfaces
Material EPO Foam
Thanks for watching and staying up to date with Fat Guy Flies Rc!
You do that by hitting that thumbs up button and subscribing to my channel! Also hit that little bell and you will be notified every time I upload a video!
God bless!!