Man Fully Restores Abandoned V8 Chevrolet C10 | Start to Finish Build by

[@FLManGarage]

Thank you for your share! I reply to all comments on the original video on my page if anyone has any questions or more details. 😃

[@TechFreezeOfficial]

Thank you for your cooperation, and best of luck with your future projects!

[@Praise___YaH]

Guys, Here is The Savior HalleluYAH - Hallel u YAH - “Praise YAH” YAH The Father (Genesis 1) YAH arrives via The TENT OF MEETING YAH was Who they Crucified for mans sins YAH was Crucified on an Almond TREE Original Semitic of Moses Isaiah Scroll (The Original Isaiah)

[@iamgermane]

He should have used cordless ratchets more.

[@ДмитрийЮсова]

Отличная работа!!!!! Сколько времени ушло но восстановление автомобиля???????

[@kennethpaladino4948]

Kool! I just built a ‘65 c10 for a customer! Cut the floor & firewall out of 2000 silverado & welded the 65 cab 2 that! Never disconnected the floor from the chassis r removed any running gear! Lots of difficulties though due 2 the 99up chassis/ body mounts being mounted further forward! Built at least a dozen old hotrod cars & trucks this way! But used the 88-98 donor chassis & floor/firewall! Great way 2 build & eliminate the floor rot at the same time! I’m going 2 build my grandad’s ‘64 c10 from a 2006 4WD Tahoe! Have been told the chassis is correct length! Don’t know bout that yet, but had 2 add 7 inches 2 the front of the bed on the ‘65! U have inspired me 2 get on with it, but I have so many other projects 2 finish 1st! 👍👌

[@iTeerRex]

What a labor of love. He more than just swapped the frame. He refurbished restored the guts of the 2001, and the body of 1966, and then fitted them together.

[@ecannon649]

Would have loved to heard it run and see it going down the road. Nice work!

[@raimundopedrodasilva5417]

Boa tarde amigos eu amei assistir o vídeo da restauração que vocês fazem nos carros é impressionante vem tudo enferrujado e sai novo em folha parabéns adorei o trabalho de vocês que Deus os abençoem infinitamente certo 🙏🙏🤠😇😊

[@P.H.U_FixItGarage]

"F250 Restoration Project: Rust Repair and Complete Transformation!"

[@P.H.U_FixItGarage]

"F250 Restoration Project: Rust Repair and Complete Transformation!" 😍🤩

[@brianparker6811]

Brother you have so many different skills. What an amazing job. This is truly a treasure from the past saved!

[@richardcline1337]

But it's NOT! The body is all that's left of this old classic. Even the interior is basically trashed. I wouldn't have that junk given to me.

[@gordocarbo]

@@richardcline1337 Probaby drives and rides 100 times better but see your point.

[@francoisbouchard602]

Nice job sir Nice truck sir Nice show 😃👏👏👏👏👍👍👍👍👍

[@loiho9078]

Cảm ơn anh đã chia sẽ video rất hây ❤🎉chúc anh và gia đình nhiều sức khỏe an lành hạnh phúc và thành công 💕💕luôn đồng hành cùng anh ạ 🤝🤝

[@butchquizon8986]

Wow, what a job well done. I always love patina finished.

[@paulcarter2907]

So much hard work..Well done and thank you...Enjoy!

[@Six4691]

I’m not a big patina guy, but great work in saving a piece of history! Looks beautiful!

[@richardcline1337]

But all he actually saved were parts of the old body. Everything else is from the victim Tahoe. I'm glad he likes it because I wouldn't want any of it.

[@P.H.U_FixItGarage]

"F250 Restoration Project: Rust Repair and Complete Transformation!"

[@MrRestoration9999]

perfect restores 🥰🥰🥰🥰🥰

[@mrpesky163]

I like everything done, with one exception. The interior door panels are more "nasty" vibe than "worn and cool". Thanks for the video, nicely done!

[@FLManGarage]

I agree with you! I will be wrapping them in vinyl to match the seat at some point 😃

[@peterdrew9393]

For all the work put into this transformation, the bodywork would have loved the same attention.

[@donparker1823]

I get that. This is a super cool project but I have a hard time appreciating the patina look. I've had enough crap cars that I don't really understand the desire for a high end restoration to look like junk.

[@johnthomas3842]

@@donparker1823 Don, you Pete and I are of the same mind. I cannot imagine putting all that time and money into this only to end up with a junky looking truck. But, to his defense, It is his truck, his taste.

[@scottsatterthwaite4073]

@@johnthomas3842 Same here.

[@dalemanolas5994]

Yeah, I'm not a fan of the patina (hipster rust) look. Still, whatever makes you happy.

[@wackowacko8931]

All you need to do is to paint a vehicle to today's standards yourself to understand patina. A "nice" paint job (ie. no Earl Scheib paint jobs) entails removing all dents and fixing all rusted panels, then bondo, then sanding the entire vehicle through all the steps, then primer or sealer, then 2k, then blocking, then taping, then color coat and clear. After that you need to wet sand the clear and then cut and buff - and you need to do this all yourself and pay for all the materials ($2-3K minimum). Expect it to take a minimum of 6 months of nights and weekends if you are diligent and multiple years if you are not (most never finish). Then you will truly understand the patina crowd. Don't want to do the work? You can write a check, but at the very least you are looking at about $12k at the very low end for a "nice" paint job if your vehicle is near perfect to start with.

[@eustaquiodias5688]

Isso sim é um projeto de verdade, top demaissssss 👏👏👏👏👏

[@BlakeParker15]

Great craftsmanship and excellent results! Beautiful truck!! 😍

[@JohnGuess-g6k]

Old guy here. Great job! Takes me back to my Dad’s 66 C20 fleet side. Hooked me on trucks forever. Like the blend of old and newish.

[@NachoPeco]

Guauu!!!! Hermosa!!!!! Qué trabajo!!!! Te felicito amigo!!!!! ❤❤❤

[@lanalyons5206]

Derek, you are so kind and giving .What great job getting this Model A back not to mention you are giving it back to the family! Awsome...🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲

[@JWnFlorida]

Gorgeous.. beautiful build..

[@carylawson-le7og]

It sucks without paint I don't care if you're a patina freak or not. Trucks nasty as keck lookin

[@JWnFlorida]

@carylawson-le7og the people who spend more on paint than their motors are what is wrong with America. All show no go.

[@gordocarbo]

@@JWnFlorida Not really...some arent into bling and power but want a nice looking ride. Usually the lowrider crowd. I like both power and nice paint, like driving a new car

[@JWnFlorida]

@gordocarbo I like it all.. perfect paint.. rat rods.. as long as the frame and the brakes match the power I'm a fan.

[@B-radT5]

My dad had that style of truck. I’ve always liked its looks. Nice job🤗

[@africanhoopoetours]

Easily onr of the most wonderful pick up restorations I have seen.well done.

[@brianward3944]

My favorite body style Chevy ever made! Awesome project!

[@matthewpeters3642]

Oh my ! This was such a great build ! Well done ! 👍

[@stevepaznokas1568]

A work of art. Outstanding!

[@peterironrope]

Wow, what an amazing transformation for this beautiful Abandoned V8 Chevrolet C10 pickup truck. You all demonstrated and performed some very exceptional top tier automotive mechanical repairs and restoration. You guys are so good, you all should run a summer youth program or spread your wealth of knowledge at a local high school automotive class on automotive repairs and restoration. Share that beautiful wealth of knowledge with today's future youth. Great job guys, I'm proud of you and the people you have become to be.

[@diegoovalle2193]

Excellent job, many make videos fixing cars with all the dirt on the car, you did a good restoration.

[@tonoalvarado1436]

¡Maravilloso trabajo! Gracias por compartir.

[@TopTech-pq]

Tears fell as the music started to play. It was as if that old car was singing its final song, echoing like it once did, before leaving forever.

[@denniscarreno5882]

I love🎉 your video…no nonsense chatting….straight to to work….well done….greetings from down under,Australia….stay safe!

[@joserodriguez3479]

This man is an artist

[@kateandstevebeasley1678]

Awesome result of a labour of love, congratulations on great looking truck👍👍

[@frankmoyarivera5282]

Otro nivel🎉 Ojalá algún día me acerqué sabe de todos los temas tansiquiera en el animo que lo iguale yoo😅 Una troca vieja con las prestaciones de una mas Reciente❤🎉

[@RoverLover-mm7lb]

Love it! I would have gone with flat instead of glossy! great job!!!

[@gordocarbo]

Same!! Gloss clear over rust just dont hit me right. Some days almost wish I put flat clear on my 'El and called it a day rather than 10 yrs 2 paint shops and way too much $

[@jerrybushman]

This is on par with the ICON Derelict brand 👏👏👏👏👏👏👏👏👏👏👏👏

[@MultiKekek]

Que trabajo imprecionante quedo hermosa felicitaciones

[@eddiereeher7594]

good show.alot of work. But the end is rewording.Keep on Truckin 😎👍

[@SuperParacuru]

OLHA: EXCELENTE TRABALHO, NOTA 10. JÁ A ESCOLHA DA PINTURA, MATOU A CAMIONETE!

[@kurtgood2914]

Awesome transformation and the truck looks very good 👍

[@gavinobarrera8412]

What a beautiful turn out man. I can't wait to see videos of it running

[@خالدالبيومي-ظ1ز]

I love your work man ! You 've done a beautiful restoration ! Enjoy and stay safe !❤

[@Gibbydogs]

Bravo such a great restoration I so enjoyed watching it. Years ago I had a 1965 Chevy C10, I sold it before I went into the Navy. Man I regret that, but thank you for sharing the build.

[@joseparra2648]

Saludos desde Venezuela Edo Trujillo 🇻🇪 éxitos cada día más hermano quedó calidad la camioneta excelente trabajo

[@gil2760]

Saudações do Brasil(Curitiba/PR), trabalho espetacular, vocês estão de parabéns. Nós aqui no Sul do Brasil somos aficionados por esse tipo de trabalho. Parabéns.

[@iosifa5397]

excelente trabajo y gusto por la C10 , una hermosa maquina de vuelta a la vida, felicitaciones , saludos desde Argentina

[@irishhandyman2009]

What impressive work! Glad to see a man your age that can do that much work to create such a piece of art. You have a talent that is becoming a rare trait now a days. Hope you enjoy that Bow Tie for many years.

[@jimromansr9971]

Man, you had me until you decided not to paint the truck. To each their own, but if I put that much work into a vehicle, I’m going to paint it.

[@gordocarbo]

Agree totally. Not a fan of rust, clear wont stop it either.

[@justinphillips6136]

I’ve heard some say the patina is a cool look on budget and drive it and enjoy it. Others say paint it make it look good and last. I’m torn on some builds.

[@maxmason6053]

Restoration masterpiece.

[@johnkaimins9998]

A very impressive level of attention to detail. The only thing that detracts from the end result (if I may) is the lack of body work and OEM level of paint.

[@gordocarbo]

Aging paint...maybe. But rust has 0 appeal, Id paint it too. Cant wrap my head around how much work and $ it took to do this.

[@LisaMedeiros-tr2lz]

Not a patina fan. Most old trucks look like old trucks. Few look like new from the factory. But, this was a nice build.

[@juleesadventures7925]

That looks amazing I would love to buy that ❤🇬🇧

[@lencampa9049]

Excellent .❤Excellent ❤excellent😊 job😊

[@adaorobertofreitas6338]

Simplesmente maravilhoso parabéns 👏

[@petroassuncao3392]

👏👏👏👏👏 excelente, parabéns.

[@SuperchiefApache]

Just flipping well done!! Love it!

[@SalahNoor-e4w]

بارك الله فيك وكفاك على هذا العمل الجميل

[@roberttapley8881]

Really enjoyed watching your work. Best no noise { music } video I have seen. Thanks for sharing.

[@Detroitmuscle74]

Fantastic craftsmanship details amazing.

[@allenrichard8795]

A very beautiful truck 💯

[@IronSikh44]

That truck looks sweet! Good job!

[@brycecrousore1985]

One of the best restoration videos on YT!!

[@FLManGarage]

Thank you!

[@gordocarbo]

@@FLManGarage How long did it take you and how long to work all the bugs out? Ive done frame offs with no swaps and know what it takes. Good job

[@Nobrun1]

Wow. I've never seen one of these where you leave the dents, rust holes and overall original look intact. Nice.

[@gregeverett8932]

Fantastic build. Personally, I'd sand that body down and give it the slick paint job it deserves after all that hard work. Great job anyway.

[@MarkRobertson-ho9tp]

Great job, impressive accomplishment and it came out very nice.

[@GroundedFlyboy737]

Incredible! You guys have serious skills, thanks for sharing this journey. I learned how to drive on this truck but with a 3 on the tree. I get so tired of seeing the slammed to the ground C-10s with LS7 swaps, and streamlined bodys. This looks, and I would think, performs like a proper truck. Only thing I would change is I would have fixed the rust holes in the front of the hood. Amazing work, how does it run?

[@gordocarbo]

I leave most my trucks stock ride height. Caminos Ill drop them an inch or two no more. Love gen 1 power

[@adammcgeorge3538]

Cool truck, love the look of clear coat over petina. The Jerry can fuel filler is very nice!

[@gordocarbo]

Flat clear but shiny not to much

[@clintmcgauley9211]

Love every aspect but the body. Such a beautiful shape deserves a clean finish.

[@MarioCruz-q9x]

Te felicito por esa restauración, te quedó bien, gracias por tu video, saludos

[@Gemellimodas]

Show🎉 . Uma caminhonete dessa aqui no Brasil sai restaurada uns 220 mil reais ou 40 mil dólares. Já dá uma casa boa na cidade. 🏡.

[@lp-fluzaotf]

Excellent job. Congratulation. Luiz Paulo - Rio de Janeiro- Brasil

[@hussamal-takriti8792]

AWESOME Good Job 👏👍

[@richardc6269]

A lot of work there. Excellent job buddy 🤙✌️. The cherry on top in my opinion is that you didn't do a single colour on the body. That's a dream vehicle I'd love to have!! 🎬🤘✌️🇺🇸

[@JoseCarlosAlmeida-rt5bn]

Simplesmente maravilhoso. Ficou nota 1000, parabens pela restauração.

[@romanrusavuk7764]

Truck look awesome. The blue paint would look nice

[@LanceJohnston-d9q]

Dude this is so sick, i cannot even begin to explain how cool this is.

[@josefelippecaetanofilho6504]

Congratulations on the beautiful work. Araruama Rio de Janeiro BRAZIL

[@pedrodlpdelapaz1217]

EXCELENTE TRABAJO,ME GUSTÓ.

[@alanpaulick7815]

Wow guy's this is absolutely gorgeous. Thank for sharing your journey on this build. Take care and be safe.

[@jarodmorris4408]

My dream truck is a mid-60s step side like this. I have a 2003 Yukon and this idea never crossed my mind. Would be an amazing build.

[@gordocarbo]

This is a hell of a lotta work, time and $. Sure it drives nice but Id just put an engine trans and update a few things on the original frame

[@wiliamsmash453]

Freaking phenomenal!!

[@armandoalanizjr.7730]

Wow!! That's badass.. I love that patina Iook.. that's a lot of work.

[@RickyMyers-g9m]

Gave the old horse a new and upgraded as well as updated life!.....NICE!!!!✅️🥇🥇🥇🥇🥇⭐️⭐️⭐️⭐️⭐️

[@lucianopedro8841]

Parabéns bela restauracao

[@osmanartan6115]

Helal olsun ustaya her beceri var onda tebrikler.

[@tobyboles5932]

TOTALLY AWESOME. YOU ARE THE REAL DEAL BROTHER. LOVE THIS BEING LEFT ORIGINALLY OLD LOOK. TOTALLY AWESOME.

[@dougnorton5143]

That gives new meaning to a bottomless gas can! 😆A very nice job, makes me want to get up off my 'can' and finish mine!

[@TheJohndeere212]

Nice looking truck. I loved it!!

[@acemeriel]

simply AWESOME! The brackets to drop down the cabs it fabricated or readily available for sale? this is my dream build.

[@darrellroeters4951]

You are a master and a well rounded mechanic, to pull this off.

[@gordocarbo]

Sure is! Electrical, fabbing on and on. Dont think Id have the patience to literally rebuild the truck adapting everything to work.

[@hankcuccina5260]

That's a huge job to undertake, good on you and thanks for the video.

[@lendog203]

you got crazy skills brother... congrats.

[@UncleRobsGarage]

Whole lot of work condensed into a short period excellent

[@fedsweet1234]

Awesome job awesome I have a 78 C10 you gave me a lot of good ideas excellent job dude excellent

[@xDrywall]

🎉 Looks amazing. 🎉

[@garywinkel1831]

Very cool, thanks for sharing!

[@donaldstutes9194]

Awesome idea with the gas can

[@alanward4506]

True but 5 gallons capacity ? you` spend all day stopping at gas stations.

[@neitabeel]

Show de bola! muito top.

[@kirkbrown8389]

Beautiful restoration. Congratulations.

[@alanparkinson5724]

Wow what a nice truck great finish mate

[@joemannix1226]

Incredible! Amazing!!!!!