Freightliner cascadia turn signal issues tractor/trailer.

[@douglasmartin4919]

Thank you. I have been chasing this issue for a month trying to find a broken wire or ground or anything. Finally found an answer.

[@e.s5625]

Thanks for the video man it saved me some money going to the shop

[@royfredericks2231]

Glad you were helped, stay safe💯

[@gtsport3881]

dude, have same problem just now, your video helps me, problem solve. Thanks man

[@royfredericks2231]

Yw bro👍

[@amaanaarabbii9736]

You save my time thank you body

[@SadeAli-f1y]

Thank you sir this solve my problem.

[@hornofafrica6512]

Brother I learned a lot about your videos thank you so much

[@royfredericks2231]

Yw man, more to come. Blessings

[@samuelberry4311]

Much appreciated!!! My truck a do the same thing, good advice. Bless up!!

[@royfredericks2231]

Big up

[@samuelberry4311]

Jus got out here with landstar, been following your videos and u been out ya fe a while so, here I go!!! Stepping out on faith and god bless prayers 🙏🏾🙏🏾🙏🏾

[@royfredericks2231]

@@samuelberry4311 yeah man, stay in GA, SC, NC, TN AL, AR, IN, IL, stay away from the northeast unless you live there and I understand if your truck is not paid off yet, set your rpm at @$3.00 , avoid the hills with heavy loads. Keep up on maintenance, quick on the load board and you will be fine. Bless

[@samuelberry4311]

@@royfredericks2231 much appreciated the advice 🙏🏾 me and wife out here, she drives too. We live in a Georgia snellville area. Will take the advice and put it to good use. Bless up 🙏🏾🙏🏾

[@jorgemelendez9546]

Good video amigo and well explained thanks a lot

[@KevyJBeatzBangerzfromBelow]

Helpful bro! Thank you.

[@royfredericks2231]

👍👍👍

[@erwinruiz5717]

I have the same issue, thank you very muchas gracias bro.

[@abdirahmanabdi3285]

Thnks for let us know , it helps me

[@JayJack91]

Great video is there a part # for the relay?

[@royfredericks2231]

Part numbers are identical, you can take it to a parts store and match it. GL

[@tonynewson1102]

Same Problem! Thank you brother!!!

[@royfredericks2231]

Yw bro👍

[@Boyleheights213por-vida]

Thank you hermano I hope that it works for me because I have the same issue identical.....

[@royfredericks2231]

Technically it's the relays, changed mine and issue never returned. Hope it works . Stay blessed

[@Boyleheights213por-vida]

@@royfredericks2231 thank you sir it worked now it's my turn to do a video of a problem you may or may not have ..

[@kanijo000]

Thanks!!!

[@Genprojectalternativeenergy]

Thank you for sharing

[@royfredericks2231]

Yw

[@seanroberts6723]

My high beam don't work either or wipets and turn signal comes on when ever it feel like. Can this cause from the same issue?

[@kenyanobles5161]

I’m having the same problem now did you ever find out what’s the problem

[@Tipa509]

Running light works properly but front right turn signal doesn't work and also rear left turn signal doesn't work. Any advices pls?

[@royfredericks2231]

Ok, hope you did check both the relays and fuses while you are there as I pointed out, check your pigtail electric line and of course the bulbs. Hope that works.

[@ktcarroll4723]

having issues no left turn signal right side good switched relays no go, checked fuses all good right relay is getting a ground when i turn turn signal switch to right its flashing a ground on/off real fast(activating relay}activating bulb to flash left relay is getting no ground signal on/off like the right side checked trailer pig tail plug at the rear of cab right side flashes left side dead was told the SAM controls the flasher for turn signals what's weird is the 4 way flashers works normal left and right blinkers work eliminating bad bulb or wiring socket issues just the ground signal is not going to left relay when i turn turn signal switch to the left thinking either a bad turn signal switch or wire inside the SAM is bad i did replace turn signal switch about 1 yr ago when i was having similar problems it didnt fix it but eventually they started working and never stopped until a week ago they would work and then stop work and then stop but now its nothing for 2 days any ideas

[@royfredericks2231]

Hello my friend, I know you said it might not be a bulb problem, but have you inspected the bulbs to see if they are grounded properly? i.e turn park lights on and 4 way also manually pull out and reinsert the bulbs. Otherwise as you said it may be the wiring. Thanks

[@ktcarroll4723]

@@royfredericks2231 yep I actually exchanged the right side bulb and but it on the left side vice versa and still no left turn signal. I’m gonna try and reinstall the old blinker switch tomorrow and see if that is the problem apparently that sends a ground through the SAM to the rely with a pulse(flasher) signal. I wish I could delete the SAM and go old school Oh when life was simple

[@royfredericks2231]

@@ktcarroll4723 true, let me know it works out .

[@ktcarroll4723]

@@royfredericks2231 well I fixed it. Believe it or not there was a bad connection on the switch in dash that controls the emergency flashers footwell dim switch The wire from turn switch stalk goes there then to SAM module and gives it a ground 😅 when all else fails try wiggling wires on that and see if it works

[@royfredericks2231]

@@ktcarroll4723 there you go 💯, we got to run our own diagnostics to determine the problem. Glad you found the issue and sharing. Blessings

[@yadwindersingh9606]

What have to change my driver side turn signal blinking fast and driver side trailer signal not working

[@ralphborroel5684]

Driver side blinking FAST means a bad bulb...driver side TRAILER SIGNAL NOT WORKING - check in SAM CHASSIS (Fuse box in engine on driver side attached to wall , for blown fuses and check the relays that correspond to your problem. Replace with NEW RELAY, if you don't know how to do Ohms test on Relay. Also, check the wires and connection to THAT TRAILER LIGHT, make sure bulb is good and no broken wires or even crimped, pinched or indented wires. Make sure the CONNECTION TO THAT TRAILER LIGHT IS SOLID (Clips good with no damage). Replace connector or repair bad, broken or frayed wires by using BUTT CONNECTORS, if necessary. Always protect but connections on wires with ELECTRICAL TAPE after fixing.

[@geraldxcii]

Thanks 🙏🏻

[@ELKOKE-]

I had the same issue with the same tractor but mine was a fuse

[@emilyschannel5470]

My fuse keeps blowing. What do you think it is?

[@mohamedyonis9539]

Thanks

[@zorangrujic657]

Thank you

[@royfredericks2231]

Yw, bro