Fridge Compressor Not Starting Replace Start Relay & Overload

[@Boxofcrap]

Most common sense instruction ever! you did not skip a step, and I felt like I was there with you. Many videos I come across, they waste time with music and effects rather than give a thorough explanation.

[@carpediem9285]

Saved me money and time. The ceramic in my relay was in pieces. Overload was fine. Compressor ohm'd out good too. Thank You.

[@chandamwila1754]

How about this problem. How can it be fixed? kzbin.info/www/bejne/omO6ZWmejMusf9E

[@williamtell2496]

Thank YOU!Emptied out our lil cube freezer last year and stored it.Ran great up to that point.After our garden started producing decided to start it back up but NO GO!Tested compressor like you said and tested good.Shook relay and heard rattle.Shook overload and heard the same.Replaced them and old freezer runs GREAT!Thank you again!

[@cesiumion]

Thank you William Tell for your honest and kind feedback...

[@AnotherOverTaxedTaxPayer]

LOL, I did the same video a year or so back. Just ran into your version. Great job.

[@Premiumzest]

thanks for the explination that the rattle sound means the relay is dead. got a new relay that was rattly still and thought my fridge was done for

[@ayawoke9906]

Thank you brother, greetings from Phoenix!

[@Mrnikkisicks]

As a refrigeration tech, explaining taking covers off and talking someone through a service call or repair, or for those who are a diy kind of person, turning the power off before should be explained before... Some people get in a hurry, or just don't think about turning the power off because they just don't realize how bad it can hurt them if its not off before diagnosing a bad compressor.

[@bazthehandyman]

Exactly.

[@bnewco01]

🤬NOW ya tell me!!!!😳

[@freddiesandoval5047]

Lol..some people don't have common sense..

[@dannylinc6247]

Or, the symptom needs to be recreated and plugging it back in must occur. Even getting a flashlight close with covers removed can cause an arc or short trying to get eyes in to see something while trying to get a compressor to restart.

[@Mrnikkisicks]

Where is your head lamp Donny Linc

[@Jack.the.alchemist]

U the man kid. Helped me a bunch

[@rudybetances449]

Very good explanation easy and quickly 👏 👌 👍 100%

[@X-KokTehnik]

Very good explanation. Greetings from creators from Indonesia. And always success

[@smann7236]

It worked man...thanks for video. I just did it now.

[@Barplan]

For clarification, the part he was shaking is the overload. The other part is the start relay. Typically, if you shake the relay and hear it rattle, it is toast, not the overload. I wonder what happened to part II of the video to see if it actually worked!

[@jeanlenor1858]

Yes, you usually see they shake the relay and NOT the overload.

[@TaigiTWeseDiplomat--Formosan]

Yes

[@robbrown6495]

While I personally use the internet to find "fix-it" videos all the time you can see that some youtubers don't really know what they are doing and are just copying videos they have seen. As a result there will be some burnt fingers out there.

[@sailoRuatpuia]

OLP

[@williamrogers2756]

How do the eitrs How do worrs go back on defrost relay

[@chisel291]

My experience with the famous clicking and compressor not starting - 2010 Whirlpool model # ED5FVGXWS05, fridge and freezer were not cooling, compressor was HOT (the compressor was not turning on). I watched 12 hrs of videos about checking/shaking the start relays and listening for a clicking noise. I also watched videos on how to OHM out the compressor and it checked good. I removed the relay and heard some clicking but it didn't sound out of normal. So after talking to several appliance techs I decided to replace the start relay. I bought it from an appliance store where no refunds were allowed for electronic components ($60 gamble). No luck, relay did not work, compressor would try to start for 10 seconds then click no power). So, even though my fridge was 6 years old my compressor was bad and I was looking at $550 to fix it. Instead I rolled it to the end of the driveway, left a free craigslist post and bought a new one. Found out "maintenance" was required on your fridge every year to include vacuuming the coils, etc... Life long mechanic and never heard of that but from now on will make sure that I schedule with my wife an annual refrigerator coil vacuuming... FU Whirlpool and the $ u cost me...

[@kevinvt4174]

Hi Daryl, The cheap compressors that are made overseas or mexico now are crap and only last about 5-6 years this is normal and by cleaning your coil it would have helped extend the life a little more but crap is crap. Don't feel bad mine only lasted 4 years on a $2000 stainless boat anchor. My local appliance store sold me a new compressor for $149 and I installed it myself and it's been now 2 years now. When I was younger and moved out of the house my mom gave me a refrigerator that was already 20 years old and it ran for another 15 before it finely gave up the ghost they just don't make em like they use to.

[@monicathurston5995]

im in the bahamas and i paid roughly 2000 dollars for a 19cu whirlpool refrigerator after 14 months the compressor gave out and the store were i bought it from said the warranty is only 1 year and to replace the compressor is 700 for the part and 200 for the labour

[@kevinvt4174]

Monica Thurston I feel your pain.

[@aliexpert920]

please dubbed in Hindi

[@engma91477]

nothing is made good anymore its all throwaway now.old hotpoint refrigerators were tanks

[@SneekySecrets]

I had this problem in a chest freezer I picked up by dumpster. The ceramic disk in the relay had cracked down the middle so it didn't rattle. We we able to spin the disk so it made contact again and it actually fixed the problem.

[@partsfe]

great tutorial! The instructions for replacing the Start Relay & Overload were crystal clear and user-friendly. If you're looking for high-quality Bunn Refrigerator spare parts, be sure to explore our site!

[@Psycho9263]

If you test it, you don't need to scape the paint. Just touch the copper process tube. the terminals on the compressor are Common (where the overload is connected) Start and Run. When testing for an internal short, test all three terminals, a short can exist in any of the windings.

[@fidelisnhenga-mugarisanwa3575]

You took the words out of my mouth...I was also wondering why he did that after all copper is a very good conductor and is grounded or connected to earth

[@Psycho9263]

@@fidelisnhenga-mugarisanwa3575 I was once working on an A/C unit, and I made the mistake of feeling the low side and the compressor was NOT grounded because some dummy disconnected it and I don't know why. The compressor had an internal short, I receive such a shock, I had to feel the top of my head to see if I still had hair.

[@martinlutherbling424]

2:39 if you have continuity to GROUND then there's a GROUND, not a short, A short would be between wiring / circuitry. Continuity to ground is a GROUND and would immediately blow a circuit breaker.

[@scottytomcat4267]

Absolutely a great video man thank you always good to see people helping one another thank you🇺🇸🇺🇸🇺🇸🇺🇸

[@Jovemdaluta]

Hello people!! 3 pins... in this compressor Top is common (1), Bottom Left is Start (2), Bottom Right is motor (3). measure resistance between 1-2 and 1-3, write it down. Measure 2-3. it should equal EXACTLY the sum from the previous measurements. It could be ok electrically and be stuck anyways. best of luck

[@drewallen3100]

Thanks for the video.

[@MrJeffinLodi]

This is EXACTLY what I needed to know.....to clarify, those parts are just stuck on there by the connections and they just pull off, correct? Mine was very tight and I didn't want to force it.

[@mohammedamer7896]

did you manage to take it off mine is also bvery tight

[@alpinehs]

Great video

[@ruffryder818]

I removed my starter and it made a rattling noise when I shook it. I replaced it and it didn’t work. So I took off the overload and that also rattled when I shook it. However, I’ve purchased about 3 overload replacements and they all rattled as well. Is it normal for the overload relay to rattle? Either way, after changing the starter and the overload relays, the mini fridge still doesn’t work.

[@duanetucker]

Same here. I suspect this guy in the video is wrong about the rattling. I bought a brand new one and it rattled just like the one I took out.

[@danaerocha777]

Me too just bought one and it rattled as well. Even messaged seller about it.

[@metratone5]

Sorry I have just remove this part as in other videos they said that this is where the thermostat was. Any way I did a reverse image and found out it's was actually a starter relay. Note to all if you look closely at this part it kinda resembles a plug. The rattling as this video suggest is actually the bottom metal Marked C between the N (neutral) & L (live) that's making the noise. Hold it and I bet the rattling STOPS. So that bit of information in this video is incorrect according to my findings. Now I'm going to remove the internal temperature controller and test that with my multi meter. 🤔

[@geoquiroz5333]

Those will always shake lol the new ones don’t but if the new ones shake it’s broke

[@usahoangsatruongsa]

3:35 "make sure you guys unplug your power(to the refrigerator). Thank you for your safety caution. It's never LATE to remind that right??

[@sabby1234able]

4.-a

[@raykeenan7387]

Thanks... worked for me...

[@rb30athorn]

This appears to be my issue, however my problem is I have a sub-zero mini fridge and can't find a replacememt anywhere on line or in appliance stores. any tips?

[@samcheng7551]

Those technical guys so crazy, they always wanted to replace a new compressor or new refrigerator, but this start relay is cost only $10-$20.

[@johndorian4078]

But is it because once a relay goes bad the compressor isn't far behind? (not sure seriously asking)....... It might just be one of those things where they dont wanna charge you 20$+labor to fix something that wont last but a month

[@theatom7264]

Yeah, I only payed about $12 for an OEM replacement. The companies parts service was of no help so I had to try fixing it on my own.

[@TaigiTWeseDiplomat--Formosan]

Probably 3 4 dolllars.

[@sandilegoodwillcibane7251]

@@johndorian4078 p

[@mikes6853]

They are scamming you on your ignorance to make money for simple fix for cheap is what it is

[@PeterHopkinsMbewe]

wow thanks for the expertise

[@KTHKUHNKK]

I have a question my friend. My freezer is working fine. What's a refrigerator part does not get cold. Is it possible I have the same problem to relay switch ? Thanks Keith Kuhn I just subscribed and gave you a thumbs Up.

[@vondaprinty4798]

At the start, do you just pry the cover off eith screwdriver?

[@carlthornton3076]

Very Good!!!

[@glenz10]

man i have the same relay as yours but its only one prong thats connected to a wire is that ok? im still new to this and im tryin to fix by myself

[@mosamokwana7883]

This was very helpful, thank you

[@jsoto392]

What is the model # for the relay and overload package...please

[@snoverstudios123]

My start relay on my Traulsen G30012 is going bad...I'm having troubles finding a replacement...do you know where I can buy one?

[@russellbrown9655]

where is part II video?

[@bransonlopez8246]

great video/ but where can i get a compressor starter relay and overload for a 2003 electrolux/ fridgidaire model number frt17b3aw3

[@funkycoldmedina32]

I will try this. Freezer left open, defrosted everything..turns on but no noise...

[@steveleavens3020]

buzzing , clicking ocured on a 2004 amana...so compressor wasnt' starting. I cleaned all coils, ensured fan works ,and proceeded to install new Whirlpool Factory parts ( W10613606- Starter device and capacitor $120 Cdn) and compressor kicked on! Mission successful for 6 weeks, and came home after being away for a few days to warm fridge, rotten food! The same buzzing, clicking...so now I got an OHM tester and get all positive readings for continuity on compressor windings, and yes the start relay is burnt out again, as well the plug in power clip to the relay has an arced brown burnt look inside it. Here's my question....Is this a clear sign of a Bad compressor that is burning out the start relay? I guess I should have tested the compressor 6 weeks ago when I had it come on to ensure it has 120V going to it? I feel it would be foolish to spend another $120 to replace the start relay again to the fear it will burn out again in short order. Is the 3 n 1 option a stronger one than these cheap looking plastic made in mexico parts? Is there a more in depth test I could do on the compressor that involves it running to see why its burning out the parts? OR is it time to put it to the curb and go spend $2,000.00? thanks

[@keenanfaddy901]

I have a 20 year old Ge refrigerator; the overload is bad. The overload has 2 wires connected to it, (black and red) the relay has 2 wires, (orange and white). I can't find an identical overload. The overload you have, shows only one black wire connected to it. Can I use the same overload and relay as yours and how are the wires will be connected. Thank you in advance

[@fdanesh6371]

Very informative but you might want to get help with the camera. Very helpful

[@alakbar7870]

I replaced both the overload protector / capacitor and the starter relay on my GE Hotpoint HSS25GFPD WW side-by-side fridge of 20 years yesterday, based on the info. I've been seeing on these YT videos about those 2 components going bad, which prevents the compressor from starting up. But even after replacing those parts, when I plug in and turn on the fridge, the same malfunction still occurs: compressor runs for about 5 seconds, and then shuts off, and I hear a repeated clicking noise as if the overload protector or relay is tripping the circuit (which is what it's supposed to do I guess if the electric current is too high going to the compressor). So what else can I do in this situation on my own here that won't require a "professional" repairman to come out and take a look.

[@mamin-br9gs]

Do you have exact wiring diagram ?. I have tree wires going in relay (Black, White, Grey) and two wire going in Overload (Black and Blue). How do I retrofit these wires in new Overload/relay which has only two wire ?

[@EricLoser]

What if you aren't hearing the clicking described above and the compressor is warm? Is that an indication of anything? The fan is working and the evaporator fan in the freezer is working, but the compressor isn't kicking on.

[@InvokeThought22]

I'm sure you have it fixed by now but sounds like the relay may be the problem.

[@EricLoser]

haha - changed the relay and that worked for a few days. And, I now have a shiny new refrigerator.

[@agee7777]

hows the new two year old fridge going?

[@roadstar499]

just noticed my compressor clicks on then clicks off around 6 seconds later.this happens every minute or so...is this the start relay needing to be replaced?

[@bishop2503]

roadstar499 I have exactly the same problem....did u get a solution to the problem?

[@Ponpursat]

I had the same problems with my refrigerator, did anyone found a solution

[@brendacatron3703]

Is the overload supposed to rattle if bad?

[@mohammedamer7896]

hi there, i can't take the cover off. it's stuck or what. is there some technique to doing it? thanks

[@doug.a.2665]

...for gawd's sake!! ...hold the frigin' camera steady! ...I wasn't confused before ...but I am now!!

[@stacyp6138]

I don’t have a clip on my cover I need to know how to remove it

[@lanazaakat9466]

Hold the camera steady.

[@larrinenelson7293]

Can it work with the over load

[@vladimirprato6449]

Would that same part work for a Black and Decker fridge?

[@nonamedelete9132]

The overload just needs to show continuity. It doesn’t say anything if you shake it.

[@who0icu812]

Show them how the new ones wouldn't shake?

[@immisterim]

What do I do if one of the three prongs on the compressor is burnt/melted?

[@geoquiroz5333]

Cry

[@dorelcalin8806]

hello, where can you buy the relay and the protector for a reasonable price ?????

[@BRENDAJASON1]

Got a hotpoint and mine stop coming on and I accidentally touched the overload part wire and the fridge kicked on but won’t shut off now

[@X-KokTehnik]

If I arouse the capasitor

[@nephiilim]

the second you take it off ..is the precise moment the camera moves just enough to no show how to actually take it off.

[@jeanlenor1858]

Your right..

[@mrpndaman129]

Ikr, how tf do I take it off, I can't

[@kevinmeeker9223]

Can you ohms test bothe relay and overload to see if God or bad? If yes how? Ty

[@jasdeepkumar6042]

kevin meeker hy

[@kevinmeeker9223]

jasdeep kumar hy?

[@JCWinner]

You can check the thermal overload with ohms.... Its it reads shorted like when the test leads are shorted good to go... shorted should zero out the meter when connected. but you first must remove one wire from the overload protector so it will not read back in to the circuit and give a false reading... use a lower ohm setting like 100 ohms or less and then look for shorted or a zero reading. You could I guess you could anything smaller then 1K settings or less on the meter for testing this and should get a reading like the leads are shorted or meter should zero out... The start relay can be tested with the beeper... ...However a start relay of the PTC type Relay can not be tested using an ohm meter.....If your unit is clicking every few seconds to a few mintues or its buzzing and sounds louder then it did a few days ago when it was cooling then The start relay is bad... Find the part replace it and check ebay. Way cheaper then the dealer...

[@bat197]

It would be clearer to the people watching the video if you identified what the black and red wires were. Traditionally the Black and Red wires would be"Hot" . Is that the case here? Thanks Ron

[@somphos9617]

how to fix the old mode Frigidaire refrigerator compressors

[@justdissin7340]

I googled to replaced overload relay cause is making the same sound but no luck finding replacement wtf...i typed every freaking # on relay & nothing comes up,thanks for video

[@theatom7264]

Yeah, its diffucult to find an accurate replacement. I just went with the one I was able to find that was close enough. Seems to work Ok althouh lag times bettween off & on periods are longer for some reason. Could be because the new relay is a tad different from the old one. Its two pins instesd of one pin & the overload unit has a different number at the top but looks identical to the one that came with my mini fridge.

[@ManuelPerez-gf8gf]

I replaced both parts an the overload think burn out when I plug it in. I took the overload out to check it and shook it.And it made some noise inside. any idea why it would burn out the overload like that'?? thanks Manny

[@rahrah8076]

Manuel Perez locked you compressor need a new one I’d say

[@miclwass7626]

If I have to connect three wires to two black wires on a hard start what should I do

[@rollofthedice]

So on mine, the compressor checks out, no shorts, the relay and overload have been checked and replaced, the thermostat is fine and it still doesn't start. This time suck is going in the trash!

[@MrSTINGRAYJ2008]

THE GUY WAS WRONG YOU SHOULD TOUCH PRONGS ON EACH COMPRESSOR AND HEAR A BEEP. IT IS GOOD. BUT IF YOU DONT HEAR THE TONE IT IS NO GOOD

[@VincentUma-gf6fo]

Can you please send me a link?

[@SumDumGy]

I thought serialized cliffhangers were a thing of the past!

[@sonyawalker7236]

I have a GE it will run for a bit and then stop it seems like a black box is getting hot and making a lot of noise please helt

[@samisulaiman7967]

I have samsung side by side fridge , when I put the plug the fridge working in both side but after some while it stopped no fan working the display is ok no flashing , is it possible the main boar relay connected to compressor or the compressor overload protector and relay compressor or the big capacitor how to tell if the capacitor is broken thanks in advance

[@ruffryder818]

I’ve done this and it still doesn’t start. Does that mean compressor is bad?

[@reynaldoirizarry5973]

Can I use a 250vac-15mf in a 180vac-12mf refrigerator start relay?

[@arvoelias2448]

Reynaldo Irizarry yes

[@jamesmclaughlinprimitivele4587]

So I guess it didn't work since you never showed it running.

[@tonytlllis2514]

Just bought a Magic Chef refrigerator working fine at the people's house laid it down to move it got it home now it's just making a clicking noise won't compressor won't come on any ideas

[@168tsai8]

From reading on the mini fridge manual, mine says that when the unit is laid on its side, to stand it up straight and leave it for 6 hours (Don't plu it in the outlet), I think the oil or gas inside the compressor needs to drain back into the reservoir.

[@jameskakki3520]

Electric connection is not coming on Fridge what could be the problem?

[@anjanarustagi6853]

Mera fridge two month se bar bar problem de raha h machanic bar bar relay lagata kuch din chalta h phir kharab ho jata h mera fridge double door samsung k h or 10yr old h first tym problem di h samjh nhi aata kya problem h aj morning s fridge chal raha tha abhi sham se band pada h koi machanic bhi available nhi h is waqt pls suggest kya problems ho sakti h pls

[@anjanarustagi6853]

Compressor agar kharab h to kya vo repair ho sakta h pls anyone suggest me kya krna chahiye

[@jefferyhicks3678]

How do I know which 3 in 1 hard start to get for my refrigerator?

[@jamesmclaughlinprimitivele4587]

Take a guess that's what most tech do or whichever they have in the van.

[@1Dubroller]

Fir your camera guy!

[@elcostumbrismo2760]

Whrilpool tiene representantes confiables en Quito ?

[@jacquelynbradley1400]

E L C O S T U M B R I S M O

[@elcostumbrismo2760]

No fué posible ver el vídeo pero, de todas maneras, mil gracias.

[@CCP6577]

Hi, my GE side by side fridge the compressor is not turning ON I don't hear NO clicks from the motherboard

[@electriclocha]

If doesn't start with relay you can start without relay with a starting capacitor

[@malayalistech8631]

I have checked the current using tester but there is no current

[@gangareddy8928]

How to check ice inside

[@williammiller1289]

where to order? or sell yourself. part number was flashed had to freeze to see it. otherwise a lot of talk about ordering but no specific info. godd video thou. very specific. get an editor and you'll be famous.

[@amenelectronicsandliquiddeterg]

why the comprossor is sound but not work

[@specialeducator1370]

samsung single relay and overload kitna price hoga ? kharb he fridge ka

[@tavy7200]

Hello I bought one use fridge to repair in the back the Cooper pipe close to compressor it's broken,what I can do to repair the fridge ? the last orner he checket with the technician and he cut the cooper pipe in the back ,after the orner decide to sell the fridge I think the technician told the orner the cost to fix it's to much But I want to fix the fridge Thank you very much.

[@GeeTrieste]

you say you are going to put links, but you didn't

[@eomyenom1]

If you have continuity why replace it?

[@sakaraiakolinisau832]

I have a hisense refrigerator and the compressor is not working but the interior light is on..

[@nunubotshelo4164]

I dnt no much but i think u mst check yo relay at de bck of yo fridge.i hope it will help to get new relay

[@aquaexhibits831]

I went and bought a new relay overload and shook it and it sounded the same.

[@arthurknibbs328]

Me too, but the broken piece shook louder.

[@jeanlenor1858]

@@arthurknibbs328 Lolll

[@АнтонКукляев-з9ж]

Покажите как установить временной таймер оттайки

[@africagreatwalks7142]

FRIDGE FREEZER NOT COOLING. THE FAN IS WORKING PROPERLY BUT THE COMPRESSOR STARTS AND STOPS WITHIN SOME SECONDS AND STARTS AGAIN AFTER FOUR TO FIVE MINUTES, AND CONTINUES LIKE THAT, ON AND ON AGAIN AND AGAIN. WHAT IS THE PROBLEM.

[@kevingongaware583]

why cant you check over load with ohms meter to see if it i open?

[@JCWinner]

You can.. open bad... closed good... but use a low ohm setting like under 1k and on meter should zero out if unit is good.

[@LenaAlexander98]

It seems is the relay and overload is the problem because my fridge is not cooling but the compressor is hot.

[@LenaAlexander98]

Where can I get the relay and overload for refrigerator

[@vinaysetia3113]

Hi lenisha alexander i'm technision from india how can i help u

[@LenaAlexander98]

My mini refrigerator is not cooling

[@vinaysetia3113]

Lenisha Alexander from which country u have

[@vinaysetia3113]

[phone] call me i have solution 4 u

[@Slim-Pasty]

My Lemair brand freezer stopped working. I removed the relay and overload protector, then plugged each back into position, plugged power cord into wall socket and freezer works again *~* . Done this twice so far, seems to reset itself. Also the rattling heard at times, when shaking the overload protector, doesn't necessarily mean it's bad ( the case with mine ). Good to test with a multimeter to be sure. Too much food in freezer caused shutdown, i believe...someone else got a better theory?

[@hassaananwar6212]

I guess , u have a faulty compressor that consumes too much electricity and causes overload to shutdown , the same issue is happening with my deepfreezer and I am pissed off with it .!!

[@Slim-Pasty]

Interesting...perhaps so, thanks.

[@hassaananwar6212]

smallpeckerman No problem :)

[@Elfnetdesigns]

Sheese $40 for the parts when you could have spent $12 for a capacitive start kit and achieved the same thing.. Also continuity tests do not determine if a compressor has gone bad, You could have a locked rotor, thats why you put a clamp amp meter on it and see what the compressor draws while starting.

[@wisemjk9813]

So where is part 2

[@joshuaryanferguson3702]

mine is just humming and going off on a over heating

[@Mushtaq_Ahmed786]

Whirlpool refrigerator will not turn on in Sade light working ones I turn on the power ice maker sound for 2 seconds if I hole the power switch all lights blinking on the display model number GISFSAXVY02

[@Psycho9263]

We call them "Peanut relays".