Frigidaire Oven Not Heating - How to Find & Fix the Issue

Рет қаралды 89,696

Күн бұрын

Пікірлер: 103

@lianinutter4069 4 ай бұрын

This was the best video to show all the ways to check that your oven isn't heating up.. We have determined it's the sensor and is most likely the cheapest fix of all.. I want to thank you so very much for taking the time to make this video! You were very thorough and your video was very clear in the pictures and what you were doing.. Thank you thank you

@ralphroberto4413 9 ай бұрын

MAN !!! This is the BEST !!! Video ....Keep up the GOOD WORK !!!.............Thank You :)))

@bensappliancesandjunk 9 ай бұрын

Thanks, will do!

@jayjudd6518 10 ай бұрын

I found my way to your channel. You have showed me so much. I did get a stove and dishwasher. Your microwave class was insightful. I’ll hit stop for the rest of my life no more opening that door while running. I’ll check with you on parts when needed. 😊😊thanks😊😊

@ethelryan257 10 ай бұрын

This was really well demonstrated. I wish Frigidaire, today, was the quality of Frigidaire in the mid-20th Century!

@bensappliancesandjunk 10 ай бұрын

Sadly, there aren't as many good factories churning out reliable parts like they used to. Frigidaire has to buy from the same garbage parts manufacturers others do. Some parts are really, really reliable still. But there are others like the control boards that really stink, because the assemblers just aren't offering good components, from what I see.

@youdontknowme5969 10 ай бұрын

OMG I have to share an oven mishap that happened in my family last night. My mom's flattop Whirlpool range from the late (maybe even mid) 90's finally gave up the ghost (well, the oven control board did). She called me in a panic. She said she heard two pops, smoke coming from the control panel, the display was all wonky, no buttons responded, both the bake and broil elements were on, and the door was locked!! I told her to turn off any "double" breaker, which of course stopped the madness. Resetting the breaker the electronics that ran the oven were dead. In the meantime it's holding an unbaked cake hostage LOL. I'll be helping her shop for ranges this weekend.

@bensappliancesandjunk 10 ай бұрын

I had that exact scenario happen to a tenant of mine. It can be scary!

@K5EGG 27 күн бұрын

Great video! My 10 year old scratch-n-dent Frigidaire stove "violently blew up" its bake element last week and a new element didn't completely fix the problem. Your video got me in the unit to diagnose that the bake element's relay was fried (melted a bit) My midnight-on-a-Wednesday-night fix was to grab a spare 5-pin Bosch (30A@250V rated contact) relay out of the garage along with a wiring harness to match and swap it in place of the original Omron 16A relay. Result is a working oven that makes a satisfying CLICK sound when the relay activates. Removed the "NC" (center pin) wire out of the 5-pin harness (guess its a 4-pin now) as it wasn't needed for the result.

@tymetalcorp.3120 5 ай бұрын

Thank you for a thorough and informative video. Precisely what I needed without a bunch of fluff. Great content and pace. Thank you.

@tasham1844 6 ай бұрын

Thank you so much for the video! It was perfect for me, who likes to fix before replacing. Issue ended up being the main board. Frigidaire oven is back in business! I didn't think it would be the board since the stove is only 7 years old. Indeed, it was. Disappointing because i got rid of an old Kenmore stove that worked fine, but my husband wanted new appliances. Kind of wish i had held on to the Kenmore a bit longer. Thanks again!!

@codysauer5299 3 ай бұрын

You saved me buying a new oven! Thanks For the excellent information!

@derekwood2361 3 ай бұрын

You are a jedi sir. Clear instructions and got the element and mother board replaced. My oven is working again. Subscribed. Thanks

@dporrasxtremeLS3 Ай бұрын

Ben IS Fantastic! Thanks Ben! You're a lifesaver!

@bensappliancesandjunk Ай бұрын

Thanks for the support!

@DaleYoder-i4e Ай бұрын

Awesome video. Easy to follow. I think I found that my thermostat has failed. Appliance store currently closed, will replace the thermostat as soon as I purchase one, hopefully that fixes the oven. Thanks!

@HINDEREDANGEL 9 ай бұрын

I don't see the link for the mother board.

@GinePB 5 ай бұрын

Hi Ben I live in Ottawa Ontario and want to thank you for the video 15:35

@hotpuppy1 10 ай бұрын

If you've had the experience of having an element explode, it's a real show. We had our oven element (Magic Chef) explode and arc. Impressive. My sister in law had a stove top coil explode and blow hot bits around the kitchen.

@rdiehl7809 5 ай бұрын

Great Job. Great information. I've seen many and you are the best. I'm saving you to watch later for reference.

@LuigiTorchia-g3p 23 күн бұрын

Thank you. It was a great help.

@dutchmiller704 10 ай бұрын

Good video. I saved for the future.

@bensappliancesandjunk 10 ай бұрын

Thanks!

@dporrasxtremeLS3 10 ай бұрын

Amazing!!! Thanks Ben!

@woodrowwilliams1812 10 ай бұрын

Hey Ben, is there an adjustment on the board to make the set temperature match an oven thermometer?

@bensappliancesandjunk 10 ай бұрын

yes, I have that video being edited to add to the collection!

@bryndonhelmick8784 6 ай бұрын

Freaking awesome video. Got it traced to the control board. Thank you.

@bensappliancesandjunk 6 ай бұрын

Nice! I am so glad it helped!

@zekenzy6486 10 ай бұрын

Great Video. Thank you for sharing. Have a nice weekend

@bensappliancesandjunk 10 ай бұрын

Thank you! You too!

@joshv2100 Ай бұрын

Great video. Thanks for sharing.

@aaronparisi3081 2 ай бұрын

This was an awesome video. Thanks for the help

@davidconnell6893 Ай бұрын

Nice job, this video helped a lot.

@bensappliancesandjunk Ай бұрын

Glad it helped

@lostee2001 4 ай бұрын

Super thorough! Thank you so much!! 🙂🙏🏿

@mellisb 5 ай бұрын

Excellent Video! I am having trouble with my Frigidaire FFEF3018LBG electric oven. Sometimes the bake element wont come on at all. I replaced the element and the temperature sensor, but it is still erratic. When it does heat up it could take several hours to cook anything. The broiler and the stove top work fine. I am also not getting any error codes. The panel display I am using looks exactly like the one in this video. I am going to order the controller and the overlay as soon as possible, but I wanted to see if you had any other advice. ☺

@fatheadbakingcompany 3 ай бұрын

Hi! I'm having the same issue with my oven. I replaced the element and temperature sensor and it's still doing it. :( Hoping I don't have to replace the mother board and I don't want to have to pull the oven out. It's a double wall unit. I hope we find answers soon!

@matthewmanucci 3 ай бұрын

Thanks for the tutorial Ben. Im 99% certain after performing all the tests that it is a simple matter of replacing the element. However, one thing concerned me. I don't have much experience with electricity so please tell me what I should do. I was testing the signal of the 3 wires that connect at the bottom. I got 120 for them and 240 for the outside ones. However, upon doing the outside ones, there was a spark of elecicity which burned the red side of my multimeter. When I got the courage to check again, the reading was still normal. 120v on the two insides, 250 on the ouside except the place where the black wire connects looks burnt now, even though it works fine. What did I do and what do I do. Thanks. Matt.

@user-kb2dy5uj1k 6 ай бұрын

I have the same stove, oven wasn’t working and ended up replacing the control board from the site recommended. Oven now works, but my clock keeps changing time, any idea why or how to fix this?

@bensappliancesandjunk 7 ай бұрын

Everyones' been asking for the Oven Control Board as they are VERY hard to find: bens-appliances.com/products/5304509493-electrolux-oven-control-board-by-choice-parts

@stephenblack8804 8 ай бұрын

Great video, very concise explanation, easy to follow. We have a Frigidaire model GLEB30M9FSC wall oven, the oven temperature is low, at 350 degrees the temperature is 25 low, at 450 it’s about 30 degrees low. Replaced the lower element about 6 months ago, element wasn’t heating, fell apart when removing. Went through the calibration procedure, problem persisted after calibration. Any suggestions on how to proceed? If it’s the control board what’s a good source? We are in a very rural area, service people are hard to find.

@bensappliancesandjunk 8 ай бұрын

I'd replace the sensor first

@Kiskadee8388 10 ай бұрын

We moved into my Grandparent's house that has a Magic Chef 30-inch gas stove, electronic ignition, manual on / off knobs, no electronic digital control panels. The four burners work, the oven does not. The appliance tech worked on the oven for over an hour. Replaced the broiler igniter, it did not light up. The oven igniter did light up but no gas flowing to it. Still the oven and broiler doesn't flame up. Tech said the gas valve is bad. He could not find a replacement gas valve for it. How can the gas valve be bad when the gas gets to the burners? Where can we find a replacement gas valve for the oven? I can take a photo of the appliance spec label if you can use it. Appreciate any feedback.

@bensappliancesandjunk 10 ай бұрын

He needs to do an amperage test on the ignitor with electricity going to the unit, but not gas. Often times, the amperage on the ignitor isn't high enough to actually turn the gas valve on. It can glow cherry red, but if it doesn't hit >2.8a, it won't open up. This is a safety feature because it takes a certain level of heat (produced by the electrical current) to allow the gas valve to open up. I do have videos on this for Frigidaires and GEs on my channel. We've been bitten even by new ignitors being faulty out of the box, only pushing say 2.6a which wouldn't trigger the valve. A new ignitor should be in the 3.0 - 3.3a range which is well above the threshold needed.

@nathanreeves1701 7 ай бұрын

I just replaced the control board (from the site u recommend) but the clock now goes faster than it should & the interior light doesn’t work now. Any idea why?

@user-kb2dy5uj1k 6 ай бұрын

Having the same issue, did you find a solution to this? I also replaced the control board and now my clock keeps changing.

@deanhenderson4405 5 ай бұрын

Our oven is a Frigidaire model FEF352AWF with 10 buttons, but our buttons are laid out in different positions. The letter/number posts are labeled the same for the 5 main wires. Will the part you listed still work?

@johnblystone8781 10 ай бұрын

I have an Amana gas range that has a glow type of igniter. It is perhaps 15 to 20 years old. The igniter comes on quickly, BUT it then takes the oven approximately 5 minutes to light. Does this seem normal to you? If not, do you have any suggestions or a video that covers this problem? John

@bensappliancesandjunk 10 ай бұрын

Likely a weak ignitor that needs replaced.

@tshaunscales8086 9 ай бұрын

I can't get the screws out to get to the bottom element. what do you recommend in that situation? also how long should it take for the oven to heat up afterwards?

@mssj4gokou 10 ай бұрын

What is your go to recommendation for smoothing out/cleaning a flat top like this? Mine is similar but severally scratched. Do you use The Pink Stuff?

@bensappliancesandjunk 10 ай бұрын

I need to do a video on how to properly restore these. It's a bit complex, but you can fully restore them to new shape

@ajwodrich3239 9 ай бұрын

I love the video and your guidance has helped me replace the exploded bake element, but now I need the control board. The link doesn't seem to be here; can you please provide so I can support you in obtaining it?

@bensappliancesandjunk 9 ай бұрын

Whats your units model#?

@ajwodrich3239 9 ай бұрын

@@bensappliancesandjunk PLEF398DCA

@jackieflowers134 8 ай бұрын

@@bensappliancesandjunk model FFEF3048LSM serial:VF70939852

@jackieflowers134 8 ай бұрын

@@bensappliancesandjunk I'm in this same boat. Trying to decide if it's worth getting the control board or getting a newer appliance as based on the serial number below it's 2017.

@MATRIX2K 21 күн бұрын

my Frigidaire electric oven both broil and oven bake stop heating, but top burners still work, what do you think is the issue???? don't want spend money replacing the heating elements...

@ShannonSmall-z1o 4 ай бұрын

Hey Ben I replaced the broil element in my frigidaire but it is stil not heating up. My element had 2 humps lie in this video, i replaced it with one that has 3 humps..would this make a diffrerence?

@gloriamcleod6386 3 ай бұрын

Broil and bake element do not heat up at all. The bottom bake element was replaced 2 yrs ago. The panel works as well as the stove top. What's the single fuse under the top of the stove for? It's beside the oven light switch and the plug in on top

@bensappliancesandjunk 3 ай бұрын

Thats the thermostat for the unit

@aliullah1014 9 ай бұрын

Where could I find the control board?

@85celticsfan Ай бұрын

Awesome video

@bensappliancesandjunk Ай бұрын

Thanks!

@deeonn2500 5 ай бұрын

Hi Ben, I replaced the baking element and the oven still not heating up

@deeonn2500 5 ай бұрын

@bensappliancesandjunk

@jsavoni6478 8 ай бұрын

I wish the replacement control panel and layover where listed in the description

@bensappliancesandjunk 8 ай бұрын

I was given a prototype for this video. Allegedly it'll be available in a week or two and I'll post it as fast as possible.

@jsavoni6478 8 ай бұрын

@@bensappliancesandjunk no problem. I ended up ordering one of Amazon for around $97. I beleive it is from the fridgidiare store.

@michaelkughn3591 28 күн бұрын

how can you tell if your oven is getting enough electricity if it is in a cabinet without a stovetop?

@michelehale5364 7 ай бұрын

I did not pick it out. But I love a good puzzle.

@kiamon-jr8ep 9 ай бұрын

Hi Ben my oven is not working no heat if i set is 350 baking it jumps 150 f like no heat what should be rong with thanks for answer me

@JohnClark-sl7ps 8 ай бұрын

is there no link to the board replacement?

@bensappliancesandjunk 8 ай бұрын

Should be added soon. I was given a prototype board for the vid assuming that when the video was done, they'd be available but they are running behind for another week or two

@lynnschantz9185 10 ай бұрын

I have a 18 year old glass top Frigidaire range, the problem is the oven I have to set the temperature 25 degrees higher than what I need. Which is doable for me, it’s been doing this for a few years. There is no way my husband will check it out he’s 72

@bensappliancesandjunk 10 ай бұрын

Thanks for the great comment. I totally didn't do it in this video, but you can program an offset on it to fix that issue!

@pamelamanning99 2 ай бұрын

Similar here except I have to go up 50 degrees higher. Landlord sent a list of things to check, essentially what's listed here. We're both 72 but I guess we'll be doing this.

@daisukiyamamoto3904 8 ай бұрын

My Kenmore oven automatically turn on. It has digital display. Is it because board gone bad?

@MrDutch1e 2 ай бұрын

My oven, a very similar model to this, about 8 years old made a pop and wouldn't heat the oven last night. Upper and lower element don't heat. I was hoping there was some kind of fuse but from this video I'd guess it was the control board 😢.

@bensappliancesandjunk 2 ай бұрын

Pop could be the power cord/terminal block too. Does the stove heat?

@MrDutch1e 2 ай бұрын

@bensappliancesandjunk ya the stove works fine and the pop sounded like it came from behind the top panel. Could still be just the sound escaping from up there I guess. Control board being almost $200 CAD makes it a stretch to not just go new considering the age.

@dvxdude12 2 ай бұрын

@MrDutch1e mine did the same thing last night, very similar model to the one in video. Stove top works but hears a loud pop. Going to look into it after seeing this video.

@MrDutch1e 2 ай бұрын

@dvxdude12 let me know what you find. I'm thinking it's the board but not sure if it's worth it in Canada. Board is $200 here and it's 8 years old anyways.

@Johnobrienrulz Ай бұрын

Any results? Did you replace control board? Same symptoms here

@LeBlanc_James 9 күн бұрын

I see no one is taking about the over heat kill switch? does this oven not have one? i made the mistake of trying to heat my kitchen using the oven and now it doesnt heat up anymore, but i dont see a spot for a over heat kill switch?

@user-hjbmommyx3 2 ай бұрын

What about if the on light is lit up but everything is off

@joaquinsuarez6090 4 ай бұрын

Great video, thanks and question on Maytag MER8800FZ0: oven bake when setting temperature to 350 only preheats to 280 and take long time (30 minutes). Broil works fine. What can the problem be? I can afford to pay a technician. Anybody please advise.

@chucky2141 4 ай бұрын

I am having the same issue. Did you figure out what was causing yours?

@sabesta 12 күн бұрын

My harness openings are so small that the probes can’t fit inside. Now what?

@ryangreer4812 4 ай бұрын

the yellow transformer on the board is what goes bad its a bummer that there aren't any places to buy them

@jimsmith7636 2 ай бұрын

Ok.....I've got a strange problem. Clock won't operate and won't activate bake or broil. Swapped out board with same result....I'm stumped

@Johnobrienrulz Ай бұрын

Did you open up your control board? Is it fried on inside?

@styga1969 Ай бұрын

Ok. So my temp sensor reads 0 ohms. Would that make my broil and bake not work? The upper and lower grids read good. Broil and bake not working .. not heating.