From the Tech Desk: How to set the endpoints on the two speed servo in the AXIAL SCX6.

Please click "Show More" for links and more information.
In this video we are going to show you how to set the endpoint on the two speed servo in the Axial SCX6.
Axial SCX6: www.horizonhob...
For more Horizon Content Follow us on Facebook, Instagram, and Twitter!
/ horizonhobby
/ horizon_hobby
/ horizon_hobby

[@alfredocanto9901]

Anyone still having issues or you having a solid purple light instead of a blinking purple light, make sure your second speed transmission servo is in aux 1 so you can program it, my wasn't and was running fine till i left it park for a couple days and couldn't get the damn transmission servo to engaged so after researching for 4 hours i finally found out that it needs to be in aux 1. Make sure it is in aux 1 and give it a try, i solve my issue and now is driving great again.

[@MrDevo5]

thank you for this video. mine dropped out of bind today which also affected the shift servo . rebound it and followed your instructions an all back to normal👍👍👍

[@blizzardbasher4348]

thanks so much for this vid, i needed to set the shift points on a axial ryft with the dx3 remote, but couldnt figure out how to do it 👍

[@AhmedAli-my9we]

Hey my friend, how are you? I tried to follow every step you said but nothing work. I was trying to adjust the steering and then I turned off the RC and I turned it on again and the car it started going crazy. The wheels start spending and the steering it was going crazy it was going left and right Please help🙏❤️

[@rccasper1]

Does this video mean that we need to adjust the endpoints on the SCX6 or is it just a reference?

[@HiLuckyB]

I find most RTR's need to be adjusted, Or you're going to burn up the servo at some point. I'm going to check mine when I get my SCX6.

[@alfredocanto9901]

What if I'm not getting a purple light, I'm only getting a blue light. Do I have to mess with the knobs or something?

[@lowblueranger]

Mine is having an issue when going into 2nd gear. Some times it will not fully go into 2nd and just be in “neutral”. It will just sit there and click when applying the throttle. Do I need to set my end points?

[@TTORADell]

I tried to follow your video relating to adjusting the steering endpoint adjustment. After the adjustment I turned off the radio (TX) to save. Then when I turned it back on I had no throttle control coming out of the ESC. Then I took it to a local Hobby Store and they told me my RX was fubar and could not be bound ? So I'd be afraid of following anymore of you advice. As it stands I have an expensive paper weight collecting dust. 😡 This was following your instructional video specifically for the Axial SCX6. This video kzbin.info/www/bejne/hJixoqhmgdSiepo

[@MaverickAus]

I've adjusted mine about 100 times and it still won't shift correctly. It will go into hi gear just fine but will not consistently go back into low gear. I even tried a different servo and different radio gear and still cannot get it to work reliably.

[@OnlyDianes]

My transmitter won’t go into the auxiliary mode anymore..? It used to but now it won’t do it anymore.. that’s weird

[@paulguerrero972]

Still want this in kit form!!!!! 🤪🤪🤪