from weeds to water red waveblaster

Rumor has it that in the early 1990's Yamaha/wavrunner developed and manufactured a personal water craft that stands the test of time and will forever be considered the best mass production pwc ever made. The WaveBlaster 700 commonly called waveblaster 1 or wb1. On todays adventure the brothers will reclaim one of the legendary waveblasters from the brambles, revive it, and return it to its natural habitat. The water
shout out to sbt blacktip and hydroturf parts used in this video are available at www.shopsbt.com

[@NoSocial1984]

Wave blaster content is the best content

[@jacobsebbas6449]

I liked this video so much that I watched 2 minute ad for old people at the end!

[@boatbikemike8571]

Nothing like that first cold start after assembly. Always make sure the exhaust is pointed into the house. Makes it so much better

[@JoelArseneaultYouTube]

Awesome video, fellas ! When you build a WaveBlaster, we are all winners ! I'm excited to see what happens in the future. This makes me miss you guys and building / playing with skis. Thanks for sharing !!

[@JetSkiBrothers]

yeah buddy! Every one likes a good waveblaster. Miss you too but I will say the weather has been trash around here lately. Making it tough to get out there and ride.

[@JoelArseneaultYouTube]

@@JetSkiBrothers The weather has been trash here as well. Even if I wasn't in the situation I'm in.... I don't think I'd be doing much riding.

[@JoelArseneaultYouTube]

I have been waiting for over a week to watch this video, and less than a minute in, already, it is worth the wait.

[@wurthmannd024]

have had 2 1994 wave raider 700s for almost 10 years now. hands down the best reliable ski I have ever owned.

[@SleepingGaint]

You guys make it look so easy

[@royalzinho100]

Awesome build!

[@latunguley]

Cool insert of instant parts on really cool trick. Especially the seat cover stapler shot lol

[@TurboDog73TX]

The oft thought of but rarely seen JS Bro Jason in His natuaral habitat.

[@jasonskibrothers2192]

You can check it off your jsb bingo sheet. Cheers🍻

[@lakelifeandbeyond]

Great video and can’t wait to see more of these builds.

[@MrSector9]

color scheme is cool

[@bobthedude9322]

Under shirt with suspenders is gangster

[@viper8466]

I need to get a blaster. Great video as always.

[@simulation993]

Man, that color scheme is C O O L!

[@WVdavidB]

I totally did the rag trick on my first stand up. Ran great on the trailer...not so much in the water.

[@kurtheimerman8267]

Awesome video!

[@auriceburrell8148]

Hopefully that's the sun going down and not coming up, neighbors just love you

[@bmxbarron]

i dig the bootleg Black sabbath background music, lol, great video....

[@RealSuburbanCowboy]

Color scheme IS cool. Gold is best. Fun video.

[@ryanbrunson7002]

Lol, I'm going to start calling carb boosters "bombsights." They are a second venturi that further speeds up the air through the carb around the fuel nozzle to make the carb pull fuel in better at a wider range of engine speeds.

[@JoelArseneaultYouTube]

12:30 I kinda hope that Jason was making fun of me for leaving a rag in my intake last year, haha. "why is it only running on 2" ... Removing the rags is worth a few HP for sure.

[@GoldenCroc]

Jason the third brother? Come on, thats obviously Joel....hes been in way more videos these last years I should think... But considering your very nice build in this video, you can pehaps be accepted as the fourth brother. But seriously, well done Jason, it turned out pretty darn well I'd say. And that look certainly is something... very wild west bordello interior. I dig it.

[@asdmuzak]

You must be new to the channel, Jaso is the OG JBros, Joel Astronaut is a ring in at best.

[@jasonskibrothers2192]

Bordello...I like that! 🌶️💃🤠

[@GoldenCroc]

@@asdmuzak Oh I know, just poking a bit of fun at Jason.

[@GoldenCroc]

@@jasonskibrothers2192 Yeah the color scheme reminds me of old western movies look... the copper of old brass detailing and red velvet etc. Not fully serious though, of course. Anyway, sweet build man!

[@jasonskibrothers2192]

Great drone footage on the ride!

[@Detailonthemove]

I polish PWCs in like 2 hours for only 150 a piece. cut and wax. even a light wet sand sometimes. red and blue always fade fast unless you keep up on it. Also hydroturf sticks better if you flash the glue on the back with a heat gun

[@CoyoteChris]

Let’s see those races 😂

[@badm0t0rf1ng3r]

So uh... whats going on with that SXR 160 (hull?) you got there? maybe a 1100 triple swap?!

[@JetSkiJarrod]

You know bob ross was a drill sergeant? 💀

[@sofa-kingfpv3295]

The venture brothers shirt is so awesome. Who's that again is it #43?

[@jasonskibrothers2192]

Obscure find, very nice! It's 24, rip.

[@congerthomas1812]

I've got a 1969 sea doo,it needs resurrected!

[@vizibug]

there's something about watching a grown man build an engine with a claw hammer..?.

[@JetSkiSuper7]

That SX-R hull sitting next to it was mine at one time. I sold it to a wheeler dealer jetski fanatic near Seattle a few months back. Can’t wait to see what you guys do with it.

[@jasonskibrothers2192]

Not sure how you can tell, but it sounds like you're correct.

[@JetSkiSuper7]

@@jasonskibrothers2192 The scratch on the handle pole was done in my garage and I had talked to the guy once he posted it on FB and he said the Jet Ski brothers “bought” it. I kind of figured you guys traded some of your old hulls for it but who knows.

[@jasonskibrothers2192]

Interesting. Yeah, just trying to build it with a donor sit down. How much did you sell it to him for? Did it have a title when you sold it?

[@JetSkiSuper7]

@@jasonskibrothers2192 I sold it for $1,100.00 if I remember correctly including the driveshaft and yes, the title. Did you not get the title?

[@badm0t0rf1ng3r]

You put the 1500 in a gp1?

[@jonathanbrumfiel9909]

where's the carb book?

[@jeffbryner5355]

Dude those red pipes are a pain to install. I sold mine and got a bpipe with a mod chamber. So.much better

[@jasonskibrothers2192]

Confirmed

[@jeffbryner5355]

@@jasonskibrothers2192 🤣🤣

[@user-sv8ew4ep9g]

How come your Wearing winter coats? lol geez

[@jeffbryner5355]

The legend of pwc's If you have a ski with a seat and it's not a b1 u might as well just park you couch because the b1 is the only ski with a seat worth riding! Yes even better the a seadont hx wannabe blaster! The waveblaster is hands down the only ski with a seat worth riding

[@maccoretti51]

Comments like this tricked me into buying one as my first ski 😂

[@Flippinandrippin]

Hey don’t beat down the Seadoo xp for a sit down it’s very stand up like

[@jeffbryner5355]

@@Flippinandrippin well the 97 to 03 are but not really my buddy has a 951 and while it's unstable compared to tje couches we have now it's nothing like a blaster. The x4 hull is good and I even rode one with a 1100 in it. Still nothing like a blaster. The hx is the closest seadoo has gotten to the same feeling but still can't corner like a blaster and the xp are worse.

[@jeffbryner5355]

@@maccoretti51 lol!!! Get you a blaster. Most fun ypu will have sitting down lol

[@Flippinandrippin]

@@jeffbryner5355 yeah have a 1996 xp it corners pretty good I have beach house sponson on it so that helps but I would like to try an b1. If I can ever find one of a decent price

[@Flippinandrippin]

I got the first view and like 🤟🏻💪🏻

[@JetSkiBrothers]

🤘🍻

[@freekelsinghorst]

the 360 camera sucks