From

  Рет қаралды 2,335

Jason Walton

Jason Walton

Күн бұрын

Пікірлер: 40
@gary63693
@gary63693 7 жыл бұрын
Yay a drive a along. Thank you. I'll watch this tonight
@danwok
@danwok 7 жыл бұрын
Jase. I found this on a website about M6 closure. Parts of the M6, completely closed due to an "unsafe" bridge in Staffordshire, may not reopen until Friday evening. Highways England says routine maintenance work on the A51 bridge between junctions 14 and 15 found fascia panels urgently needed removing from the underside of the bridge. It stressed to BBC Radio Stoke no panels had fallen down and it had decided to remove them as staff were already on site earlier.
@jasonbarnett8911
@jasonbarnett8911 7 жыл бұрын
Ere Jase, I've looked on the section from 14/15 everyday since they closed it on that Friday, and can't see sod all damage. That day cocked me right up.
@kierankitch9944
@kierankitch9944 7 жыл бұрын
Sunday drive along sunny drive along in a Volvo AND!! a trailer side dance 😊😊
@JasonWaltonDriveAlong
@JasonWaltonDriveAlong 7 жыл бұрын
kieran Kitch I did say you would appreciate that.
@philbrown3685
@philbrown3685 7 жыл бұрын
Nice to see you back on the road again Jase, even if it was on a motorway, still the chat was worth it, even if it was related to SHIT LOL.
@FarmerjakeNht
@FarmerjakeNht 7 жыл бұрын
You are the best KZbinr ever ur hilarious love it absolutely grand, have u got a tour of the the all mighty Volvo and is that your truck, brilliant so entertaining I want to be a trucker
@Heirl00m
@Heirl00m 7 жыл бұрын
Editing is on point!
@JasonWaltonDriveAlong
@JasonWaltonDriveAlong 7 жыл бұрын
Hoestbo you like that do ya! Cheers!
@robertmustard1711
@robertmustard1711 7 жыл бұрын
hi jase great vid again m8 :-)
@jameswhyte8345
@jameswhyte8345 7 жыл бұрын
Good video. And there was a new scania at 1:28:11 if any one wants a look.
@Davetg01
@Davetg01 7 жыл бұрын
I had to tip at scewfix so used the a38.
@truckerfranglais4375
@truckerfranglais4375 7 жыл бұрын
You can have certain plastics that will not mold back to their original shape ( thermosetting plastics) and a alloy that will do the same thing I do believe is nitinol (nickle and titanium) which is found in some glasses frames, a bit more useless info for you :-)
@JasonWaltonDriveAlong
@JasonWaltonDriveAlong 7 жыл бұрын
Trucker Frenglais love that! 😜
@truckerfranglais4375
@truckerfranglais4375 7 жыл бұрын
Ohhh, and example of thermoset plastinc is plug socket plastic, if you get heating, it will just char but keep it's original position
@JasonWaltonDriveAlong
@JasonWaltonDriveAlong 7 жыл бұрын
Trucker Frenglais yeah, certain plastics that handle heat will need to resist a certain amount of heat. Or they would just end up in a puddle on the floor! Or catch fire 🔥
@stevecampbell7589
@stevecampbell7589 7 жыл бұрын
it was an overhead bridge
@michaelthomas3646
@michaelthomas3646 7 жыл бұрын
ET was trying to use the service phone to phone the AA on Mars, and due to the long distance service, then the phoneline signal was extremely weak, so they had to stop all traffic so that he could hear the phone, that plus the UK AA didn't know how to tow a space ship without hovering capabilities!! then phoning his mother to say he won't be home for supper!! lol, ok so a little ott, but you got to have a laugh. :-)
@michaelthomas3646
@michaelthomas3646 7 жыл бұрын
so you were right on the filming part, as Steven Speilburg was there shooting ET2, and you were also right on the Aliens part as well!! lol
@michaelthomas3646
@michaelthomas3646 7 жыл бұрын
Or was it ET vs. the Zombies as a Speilburg special that no-one knows about yet, that he is keeping under very tight lock, and key!! lol
@adamkay135
@adamkay135 7 жыл бұрын
was that trucker jay at 33:18?
@OfficialTrucker
@OfficialTrucker 6 жыл бұрын
Sometimes I think your insane but its hilarious
@thetrainsrock
@thetrainsrock 7 жыл бұрын
wait. you dont like parsnips? or beetroot just as it is? whats wrong with you Jase? haha just joking. great vid as always ;)
@jasonbarnett8911
@jasonbarnett8911 7 жыл бұрын
I bet that petrol station is spitting now they've blanked the old 556 off.😂😅😈
@stevecampbell7589
@stevecampbell7589 7 жыл бұрын
aint it the A5103 (PRINCESS PARKWAY)?
@stevecampbell7589
@stevecampbell7589 7 жыл бұрын
from that second junction as you head into wythenshawe (another place i lived in for a while) the A560 junction, soon as you pass the exit for that junction, then it goes to NSL as you are technically the motorway section. the 6'6 width sign confused me too as they were covered by a black bin liner about 3 weeks ago.
@JasonWaltonDriveAlong
@JasonWaltonDriveAlong 7 жыл бұрын
Steve Campbell's Transport yep. What do you think of the new road!?
@stevecampbell7589
@stevecampbell7589 7 жыл бұрын
yeah, it was fine, i was busy having an road rage incident with a woman in a honda civic that cut me up and break checked me on the m6 a few times from junction 18, and i had been stuck at junction 14 for a little while on that same friday lol. or, the offending bridge was about 5 or 6 bridges south of junction 15 where the stobart depot is, i know it was much closer to 15 than to 14. it had the green panelling removed apparently it all become loose. it was an overbridge. anyway, is that a556 going to be a motorway eventually, it felt like a motorway to me, and has the blue signs which to me, must mean its the same rules as motorways.
@JasonWaltonDriveAlong
@JasonWaltonDriveAlong 7 жыл бұрын
Steve Campbell's Transport nope just an A road. It the bypass for the old section. It is long over due though.
@campbellstransport3538
@campbellstransport3538 7 жыл бұрын
still me, just different account. that road is much quicker now.
@milohughes3677
@milohughes3677 7 жыл бұрын
thinking of getting back behind the wheel after 10 years and can you tell me whats the story i dont have a cpc card was driving 15 years plus class 1 can you give me any info you think i my need ta
@JasonWaltonDriveAlong
@JasonWaltonDriveAlong 7 жыл бұрын
Milo Hughes well, you will need a CPC card so get that sorted first. Then get on an agency to get some practice!
@milohughes3677
@milohughes3677 7 жыл бұрын
ok man ta have a good one
@milohughes3677
@milohughes3677 7 жыл бұрын
ta man have a good one
@matthewsmith1147
@matthewsmith1147 7 жыл бұрын
got a feeling i passed u on that shit day. took me 2 hours get to 14 from endon piss take
@matthewsmith1147
@matthewsmith1147 7 жыл бұрын
you went under the bridge
@andrewfox1410
@andrewfox1410 7 жыл бұрын
how long have you been driving the new fh for
@JasonWaltonDriveAlong
@JasonWaltonDriveAlong 7 жыл бұрын
Andrew Fox I had one for 6 weeks when they first came out. 500 Euro6. These ones though, I've drove them since they were hired!
@andrewfox1410
@andrewfox1410 7 жыл бұрын
Nise
@S7EVE_P
@S7EVE_P 7 жыл бұрын
First for once!
From Trafford Park To The Yard
1:47:25
Jason Walton
Рет қаралды 1,6 М.
From Knowsley To Walkden
43:27
Jason Walton
Рет қаралды 1 М.
Миллионер | 3 - серия
36:09
Million Show
Рет қаралды 2,1 МЛН
Thank you Santa
00:13
Nadir Show
Рет қаралды 33 МЛН
Lessons Learnt ​⁠@welderfabber
1:55:39
Bowden Builders
Рет қаралды 1,5 М.
Building an Instagram Clone with React Native and Cloudinary
3:57:32
notJust․dev
Рет қаралды 135 М.
Manchester's Film Industry. Nostalgia and More Mills
33:48
Martin Zero
Рет қаралды 16 М.
#HGV Alright are ya!
1:01:46
Jason Walton
Рет қаралды 4,3 М.
3D Modeling Notre Dame Cathedral
3:58:49
SketchUp
Рет қаралды 681 М.
From Banbury To Devizes!
2:08:24
Jason Walton
Рет қаралды 1,2 М.
#HGV From Goole To Immingham Docks
1:28:14
Jason Walton
Рет қаралды 6 М.
Kubernetes 101 workshop - complete hands-on
3:56:03
Kubesimplify
Рет қаралды 1,7 МЛН
From Wigan To Manchester
46:49
Jason Walton
Рет қаралды 3 М.
AWS Certified Cloud Practitioner Training 2020 - Full Course
3:58:01
freeCodeCamp.org
Рет қаралды 7 МЛН
Миллионер | 3 - серия
36:09
Million Show
Рет қаралды 2,1 МЛН