Front Wheel Solid Tire Replacement

Replacing the front tire on the Levy Electric Scooters
Changing the front tire to a solid rubber tire is a great option if you have had issues with flat tires. The front wheel of a Levy Scooter is the front motor so it is important to be cautious when changing out the tire. The wheel can be removed from the front fork, but the wire connecting the motor should stay connected.
What you'll need:
Tire Pry
Solid Tire: Purchase here
Needle Nose pliers
Pot of Hot Water
Bench Vise
Written Instructions:
Your first step is to start warming up your tire. Place it in a pot of hot water and let it warm up for around 10 minutes. This will allow us to stretch it over the rim of the wheel more easily.
While your tire is warming, you'll need to take off your front wheel. Remove the two side fenders. Loosen the bolts on both sides of the wheel until it is able to pop out from the scooter. The wire running down and attaching into the motor may need to be loosened so that it can be slipped out of the scooter. When the scooter is folded down, you will see a wire coming out of the stem. Pull it slightly out of the stem and feed it down towards the motor so that you have some slack and can pull the motor out.
When taking off the previous tire, we recommend having a bench vise. When placing the wheel in the vise, make sure the vise is clamping the two flat sides of the bolt so it's threads are not ruined. Place the wheel in the vice and remove the previous tire using the tire prys. If you need an idea of how to do this, check out the video below.
This step usually needs two people. Have one person take your warmed up solid tire and hold one side down over the rim. Have the other persons take the prys, push them under the tire on the other side from where your partner is holding down, and push the end of the prys forwards so that the tire goes up and over the rim.
Once you manage to get the tire onto the rim, you will need to get some vice grip pliers and fit the tires so that they are sealed with the rim.
And now you are done! You just need to re-attach the motor to the scooter, re-attach the fenders, and you are all set! When re-attaching the motor to the scooter, remember to pull the wire up to take out its slack that you created back in step 2. Feed that slack back up into the stem.
Link to Solid Tire:
shop.levyelect...

[@cachidril]

Good job, have you ever tried to install a neumatic tyre, those solids are so much hard

[@chunks23]

It skipped the part to remove the wire from the wheel,thats the part im stuck on

[@Jovan_2312]

I guess you don't need to, he brought the whole scooter on the workbench and didn't need to remove the wire, you just need to keep scooter close and remove the tire on the side opposite from the wire...

[@chrysolitetvmd5896]

Great video. Thanks for sharing... Can you do one for the hiboy max v2?...

[@terryaraya4524]

How do u disconnect the wires from the wheel ? U skipped that part.

[@itsmesezgin]

Can u use a vice you screw on the table by hand? Or does it have to be the big one

[@sakidanagogo7264]

How long do you heat the tire for?

[@levyelectric]

Around 10 - 15 minutes.

[@bilalahmad94]

I boiled it for 5 minutes and it worked.

[@shylomason3161]

I have same scooter what solid tyre size ?

[@rarbiyoutube]

Same

[@alisonellis843]

Ohh wow thankyou for your video im just about to change my front tire and I was concerned about where the motor wire was but now I know thankyou

[@magyverled]

Adjustable wrench? Hitting that drill on high and wobbling the drill all over? This is what NOT to do when doing this! 😢

[@cocdcy]

This is exactly what I’m about to work on this weekend, thanks for the video!

[@demon1k746]

Hello, how do I remove the steering wheel bearings?

[@Exciter68]

you skipped over the disconnecting the front wire

[@wyattswildadventures8183]

Phew. I thought I had to buy a whole new motor just to replace a tire. The problem is Hobou doesn’t sell honeycomb tires. Advice on where to purchase HiboyS2 solid tires? Good vid

[@XoDeathwish7]

i saw a transgender dude do this by himself yall need two people😮

[@dayvenjohnston1181]

How did you remove the motor cable, you totally skipped that part.

[@familydesignnicaragua7429]

Where are you located to take my hiboy s2 so you can change the tires?

[@iturdaddy7096]

What’s the name of this scooter and tire size as well

[@thebuyingseller]

Not sure I can take advice from someone that uses an adjustable wrench backwards. 😂

[@ianmayer8533]

There is no “backwards” way to use a wrench

[@RealAvery]

please put a link for the 10 Inch Solid Tire Electric Scooter Tires 10 x 2.125 from amazon in your description!

[@levyelectric]

Hi, we only sell our tires on our website. The link is in the description!

[@shylomason3161]

i can put on solid tyre turboant x7 pro

[@rarbiyoutube]

👍

[@RunNGunTarot]

what size solid tire for the turboant x7 pro? any recommendation? I'm tired of tube replacement.

[@rarbiyoutube]

@@RunNGunTarot same!,10" ,on Amazon, etc..(i think that😉).. *But on this vidéo i see "8,5 x2"...

[@RunNGunTarot]

@@rarbiyoutube yea but there are a couple of options, never sure which one to get. last one i got was too small, but that is before i was aware of the boiling in hot water method

[@mrepic7258]

Where did you get your hands on the solid tire? And what’s the size of the one used in the video?

[@rarbiyoutube]

Amazon, honeycomb 10" (if It's turboant X7)..

[@RealAvery]

heres where i got mines for my turbo ant X7 Pro smile.amazon(DOT)com/gp/product/B09BZ8YZPM/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

[@thedae415]

I have an 10x2.3 tubeless tire can I put on a different solid tire only one I see is 10x 2.5 or 10x2.125

[@itsmesezgin]

how do you know what solid tire fits your rim?

[@rarbiyoutube]

Hello,the dimensions are the same. If you have: 8.5" x 2 1/2 in classic tire, you buy solid tires (honeycomb) using the same references.

[@itsmesezgin]

@@rarbiyoutube Thanks :)

[@PigsTravels]

will those work with the turboant x7 pro

[@ELCapiTRAN]

Will a heat gun work instead of boiling? What alternative can i use for tire spoons?

[@samsonite363]

Great video. How did you attache the tire to the table Vice? Is it being held by a screw?

[@emmettturner9452]

Do you sell the solid tires?

[@rarbiyoutube]

but be careful, on the tire of this video it is written 8.5x2... is it a Turboant X7.. there is also the Turboant X7 Pro it seems to me.. it is the latter which must be in 10".. Normally you have to buy the solid tire (honeycomb) with the same reference as the original tire.. it is written on the tire whether it is 8.5x2 or 10x2 1/2..etc.. And on the video we can clearly see that it is a model with "double honeycombs"!!!

[@ayoubkharrazi1912]

Thanks a lottt

[@BryantLeoTorres]

thanks

[@vorexdams9369]

Please where did the tyre come from i need a link.

[@levyelectric]

Hi, we have placed a link in the description.

[@dongnguyen558]

where did you buy that tire and does it fit for back wheel

[@levyelectric]

You can purchase the tire using the link in the description. Tires are the same size for both the front and back wheels. Enjoy!

[@bilalahmad94]

I boiled the water and put the tire in it for 5 minutes. Your method worked. Thank You.