BACK TO THE BOATYARD…. Replacing old rusty Engine mounts... Ep 314

A simple 2 day job turns into a nightmare!! www.sailingnan...
Check out Ellebogen here 👉 ellebogen.com/
For all your needs in Marine diesel engine mounting.
Arriving into Langkawi, Malaysia we were in need to complete a few repairs from our sail down. We had ripped the boom vang out the mast and had an ever growing list of jobs needing to be completed to get our new boat up and running.
Heading into www.rebakislan... for what we thought would be a week of boat jobs, turns into an extended stay with little end in sight... Whay does everything have to be this hard!!!
#boatlife #sailing #sailingaroundtheworld #froth #tayana #newboat #sailboat
Support us here ❤️
Patreon: / nandji
Paypal: www.paypal.com...
Merch: sailingnandji-... I recommend the coffee mug 👌
Socials and all the other places you will find us🤘
Facebook: / sailingnandji
Instagram: / sailing_nandji
Website: www.sailingnan...
SUBSCRIBE to our Newsletter on our website for updates on our adventures!
SUBSCRIBE TO OUR CHANNEL. 👌 / frothlyfesailingnandji
CLICK THE BELL to know when NEW Nandji videos are up!
Cheers legends!
If you enjoyed this video, Click the link below and view it again! 👇👇👇 Yew!
• CHASED OUT BY WATERSPO...

[@mintimperial1762]

Yosh put copperslip on any nut and bolt you touch , you will feel the benefits next time you have to work on that nut or bolt.

[@davidnichols147]

Great job, not only on the engine mounts, but taking the Family to the pool. Soccer balls, fantastic idea, your a STAR!

[@daled8221]

At 10:00 mins. I'm screaming hurry before the soccer ball blows up! :))) 11:00 blue Loctite is your friend "if they sell it there"! My hats off to you! Any!!! Any engine work in the bilge sucks, but in the heat humidity & short of a marine store walking up the gangway is even worse. You are again a rock star!!!

[@over-there]

Now the boat will go faster, its like getting a new pair of tennis shoes

[@dustylense]

If anyone can get that vessel in tip top shape, it's these two frothers.

[@sabretom7594]

Buddy, I worked in a boatyard for several years. I feel your pain. Your comment about how a single bolt can make you feel completely defeated is dead on. The drill and tap job was genius.

[@sandspike2929]

Nothing feels better than the satisfaction of completing a long and difficult project.

[@jaywatson7451]

How could you not be happy with that cheer squad.

[@georgesampson4714]

I don't handle heat well so you have my respect for persevering with all that sweat dripping off of you. Good thing you had the balls to be able to tackle this job. 😃

[@greglight3745]

Impressive ! Actually preventative maintenance, replacing components before they actually fail ! 5 stars to the Nandji2 crew ! We are ordering Soccer balls !

[@belindachappell9875]

Wow tough slog!! Well done 🎉

[@tomcraddock244]

Most times nothing on a boat is easy!way to go !! It’s done !! Taking care of the boat so it takes care of you Fair winds ⛵️

[@robertnixon3816]

Well done Yosh! The satisfaction of finishing a job like that is apparent! You'll be far better off with those old ones gone! Great innovation with that soccer ball! This is one of many things I love about your videos. Working as a team and getting it done! You have earned a day off! Go play!

[@GM-cq6ez]

A hard days night. Tulula is precious. She LOVES her daddy.

[@amberrf]

I love your daughters laugh!

[@michaeldenyssen9945]

Yes keep your nuts in place buddy. Your footage just gets better. Thank you

[@ianprice2298]

Those mounts were brutal!

[@griptopia]

Yosh with the bolt, was like golum in lord of the rings... amazing trick with the football, my dad was watching with me, football jack!! new one on him and he's been a mechanic for over 40 years!

[@YudronWangmo]

No big hurry. You have a wonderful family and live on a nice boat. Life doesn’t get much better than that.

[@Ron-zr6se]

Murphy struck again but you kicked his arse! Good job Yosh!!

[@nickmolonlabe5780]

It never fails to amaze me the easy jobs turn out to be night mares. The tuff jobs turn out to be a piece of cake. Congratulations you went to war on that easy job.

[@briancochran8356]

That was a job forth at least two BIG cold beers when you finished it.

[@sheerluckholmes5468]

I dare say those cold Tigers at the end were very welcome, well done that man.

[@clearthedek]

Well done! Extremely well done! And thank you so much in letting all of us know that it’s not just me who took 4 plus days to do the same thing! I feel feel you pain but nice to know that I am now part of a larger club looking at the comment from everyone who has suffered doing mount exchanges! 😂

[@moneyfornothing3264]

Love it!! Im very sporadic with my videos, but when I do finally KZbin, I definitely enjoy your channel. Josh has such a great attitude, along with being very skillful in many areas. You are actually both the same in that aspect. Great character and the willingness to persevere! Wishing your family the best of everything always!! 👍🏽👍🏽👍🏽

[@jaywatson7451]

An excellent use of that Friday. So much better than boat work.

[@michelebushnik2874]

Oh gosh Yosh! Well done! Well done!! The new mounts look fabulous! Blood, sweat and tears!❤ Bonita it's Mothers day this weekend in USA, Canada, Happy Mothers day dear!❤

[@Cturnerwrite]

Well done indeed! And the moral support in right there. Bless you three❤

[@kristaready8812]

Yosh, you work so hard for your family, you rock! Great support from the girls too. What an awesome little family 🤗💞

[@saylaveenadmearedead]

Good balance of hell engine work and heavenly resort luxury... beats the crap out of alternative venues!!! Good on ya, yeah the grrls!

[@SailingSisu]

and there I thought our engine mountings needs to be replaced :-D I am now certain ours can last another year or two!

[@steveeggert8814]

Wow, a very tough job indeed! Well done Yosh! You even impressed your two lovely ladies.

[@rickgarland8543]

"No fans" as a fan spins in the background lol love it 😊

[@michaellabombard9507]

Should have fixed the AC first😄

[@wallywombat164]

Good work as per usual mate. All i remember is Dua Lagi. Time goes by.

[@jesswilson366]

Gosh baby girls is so adorable! She’s talking so clearly now - you guys are doing great work with her

[@chriswedding1]

What a relief.

[@codydody]

Man, I hope you rehydrated yourself after that motor mount job. You sure did lose a lot of fluid through those pores😂. Great job ❤

[@kb1esx]

What a great place to entertain Tallula!

[@LisaShankk]

Yes I always look forward to a new video from yall. ❤

[@alisterhay1895]

What a bastard of a job! Pretty inspiring how you kept your cool

[@ryanborsecnik4597]

Salty Wisconsin roads have me feeling your pain. I underestimated the power of a simple propane plumbing torch on rusty bolts for years, now I swear by it. Hit those rusty bolts with a torch til they glow red or close. will definitely help to loosen them up. Penetrating oil too, but don't start a fire lol.

[@mikemoxley9477]

Another SUPER video !!!

[@bobbie7355]

Way to go Yosh. I knew you could do it. Especially with the GIRLS 🩷🩷. And a few sailor words of course 😁 Hugs from Texas sweeties 😎🩷

[@overtime_approved]

Yip always one snapped bolt away from a 3 day ordeal. Plenty of anti-seize on anything you fit. Looks like a lovely marina.

[@troublekaliman]

Awesome! 'cept for the bolt snapping part - bugga...

[@Joe.Blow1]

Hi, Before to remove an old tighten bolt, you can put some penetrant, tap a few shots on the bolt to let the penetrant oil penetrate and let it work 5 minutes. After this first 5 minutes, do the same another time and wait 5 minutes. Now you can start removing the bolt 1/8 anti-clockwise, 1/8 clockwise, 1/4 anti-clockwise, 1/4 clockwise, etc etc... You have to feel the bolt, and always pray. If the bolt isn't moving or requiring too much force, stop. The penetrating oil is maybe not the good one. After a second try, if it's not working, it's time to heat. The best Penetrating oil I ever used is State Pen Penetrating oil in aerosol (Item #121822-12). I've tried over 20 different penetrating oils and this one unjams everything. Its better this one than heating... But you have to use it as I told you first. Putting a few drops, tapping on top of the bolt to help penetrating, letting work for 5 minutes or more, and redoing it a second time... Cheers

[@alanmayes851]

Man I felt your pain with those engine mounts, the relief you must have felt at the end must have been immense. The channel is brilliant, you have a beautiful family……enjoy life my friend.

[@jamarie1972]

Great video, just think won’t be long and you’ll know Nandji 2.0 is Ocean ready. Your nuts should be safely stowed before playing near the bilge. Two Wedges opposite way round to each other tap until tight job done If you haven’t got any wooden wedges use a football ⚽️ 😂😂😂

[@alansailing1387]

Every 20 minute mechanical is only one snapped bolt away from a three day ordeal. Fun times.

[@gmchristie123]

Good job your patience has paid off.

[@tophatter15]

You are bloody amazing. Well done and done well! Froth on. Cheers n beers from Home 🇦🇺🇦🇺🇦🇺

[@davidsfollys]

Don't you love the "five minute job" that turns into 5 days had way too many of them myself.... I feel for you.. Totally love the soccer ball idea.

[@celatid6632]

Living in the North East of the US I feel your pain with rust. Every job on car is doubled due to dealing with rusty hardware. But man, doesn't it feel incredible once it's done.

[@smulismuli7976]

Title should be "Ballers sailing" 😁

[@richb313]

What a tough job changing those mounts turned out to be congrats on completing that good luck with the alignment.

[@internalcombustion641]

Boats can be a challenge but rewarding when done, what kind of dinosaur was that walking on the beach looks like it could eat a kid!

[@Lumpschlevot]

Oh man, I felt your pain. Job well done mate.

[@pamelarw58]

Yosh you are amazing as you don't give up plus Daddy's little helper was there with encouragement & of course Bonita! Those engine mounts were stuffed just in time!! Yosh you deserve a long massage after all that HARD work bending etc!! 🤗🇦🇺🍻

[@EllebogenOfficial]

Thank you so much for this video! You are an inspiration for many of us. I am so blessed to have you as a customer. If you ever need something or need help/ questions/ doubts. Let me know!

[@FrothLyfeSailingNandji]

Thanks so much guys! Extremely happy with the new mounts!

[@EllebogenOfficial]

@@FrothLyfeSailingNandji really? I am so happy.

[@halfglassfull]

RIght there with ya Yosh I DIY most jobs around the house and cars - jack of all trades. Always takes less time - until you start hehe. Tough fight but so worth it. Respect.

[@miket8453]

Good on you young man. You are a beast!

[@TRAVIS-L]

If I was closer I'd help you guys out

[@sailingstpommedeterre4905]

Yes, Ellebogen...Excellent vibe mounts!

[@EllebogenOfficial]

Thank you so much!

[@slobama]

Well done mate!

[@andrewdavisca]

Great video and great work on the engine mounting

[@MrLebro11]

Genius! With the balls. Hooray for escort living at the marina. Gotta ❤Malaysia.

[@MajTom-wd2yt]

22:40...SO glad to finally see the thread lube...was hoping all along you saw fit to do it and make the next time easier for you or the next captain. Ventos justos e mar calmo ⛵ Bob & 'Pirata"

[@davidc6510]

Hello Legends!!! A hard frustrating job that pays big dividends when it got completed. Another great update. Wow Nandji 2.0 sure is a beauty. Thanks for sharing. Yew!

[@robyg7037]

eL of good job ! Master Marine Boat Mech A Nik ! Yep, what we plan as a 1 day task turns into a 10 dayer domino of issues !

[@ThatSandersboy]

"I'll start with something easy, the engine mounts, it's just bolts." I honestly said, 'Ohh you sweet summer child ' out loud. 😂

[@DYoung-vt8pq]

Hahaahaaa!

[@adamdiakowsky4026]

Yoshie you display characteristics of Mark Wahlberg. Love the video guys

[@meltaylor7780]

Great job for the WIN!

[@adrianhockey1571]

Yeau the girls 🤘🏽... well done bro 👏🏼, awesome episode 👌🏼 ❤🇿🇦🇿🇦

[@brentchatfield5286]

equal parts acetone and automatic transmission fluid provide the best breaking. Cheaper than WD, Power Blast or whatever you guys use. Keep it up, Awesome sight. Talula is pretty sharp.

[@DYoung-vt8pq]

Yosh, hate to see you sweating so much. Good job on the engine mounts! 'Tulah is going to grow up to be a Warrior Princess. Please, teach her everything she's interested in learning about boat maintenance. She already has her parents' gift for gab. Safe travels ❤️

[@wissw.5210]

Yoush you are a hero man.. great job

[@Odonanmarg]

Well done Captain.!

[@ericvonwiegen5672]

Nice 👍

[@Mr.Stacey-L-SCC]

Nice job captain!

[@Leith.D]

Mate. Ill yell ya a secret, ive snapped a metric crap ton of bolts over the years and 99.9% of the time you use an easy out the mungrel will snap in the bolt. I just dont even try them anymore. Heats my usual go to but probably a bad idea in the boat lol. Id cut a slot in the top with an angle grinder (1mm cutting blade) and get an impact driver with a large (#4) slottled screwdriver bit and belt it out

[@waynemazan7485]

good job !! never give up !!!!!!!!!!!

[@SuperKeylight]

Hard work... but great succsess! You are excellent 👌🌊☀

[@billbaxter2914]

That was brutal.

[@bryonensminger7462]

You need to invest on a magnet on a telescopic Pole Teresa Down Under the motor and getting nuts and bolts you drop tools

[@doradosurfcharters]

Bit of neverseise on the threads followed but a lanolin spray on the mounts and engine 👍🍻

[@327365hp]

Well done Yosh!

[@Sommers234]

So great to see a happy mom and dad and child. You're beautiful accents❤ I could listen to all day

[@webheadusa9377]

Yosh, I notice the two swallow tats for 10 nm. I think your next tat ought to designate your status as a master mechanic. Yeah, you do great work on your projects! :¬) Webhead USA

[@darrenykema979]

Crikey that was a hard slog mate

[@atlaspath5803]

Well done - 2 days to 11 days - man you have patience!

[@cnking38]

Awesome. Looking forward to more adventures.

[@briandale8386]

I couldn’t get new bolt threading to match up with the old bolt threading on my mounts down in the stringer . It’s a Tayana 55. I had to put the old bolts back in . Good thing mine weren’t to toasty. I think the eye bolts next to the quadrant where the steering cables attach are undersized to

[@jonathanscott550]

Great job Mate. I guess with this new boat you will have many more job just as frustrating. Great video enjoyed watching safe sailing

[@fxpthl]

Congrats on finishing that very difficult project! Snapping off a bolt has to be one of the most frustrating things that can happen, surprised you didn't go ballistic! Your "Girls" are so much fun!

[@hanssolo4ever]

I have change engine mounts on the yanmars many times, they use different pound, on the front and back. Also I think manual says replace every five years.

[@FrothLyfeSailingNandji]

Depends what motor as it is different pound on each side 🤘

[@hanssolo4ever]

@@FrothLyfeSailingNandji yup

[@makatasailing]

Hope everything well done soon ,and thanks to come visit Rebak hope to see you are all again Rocky miss Tallulah❤

[@DanOMallsVideo]

Legend!

[@brice5542]

Upgrading to the same mounts in my Tayana 37, Yanmar 4jhe. good job Captains, love the Ball inflation,, cheers. pop's fl

[@dalltm]

Congratulations!