FRP Butt-Joint Kit Lamination Tutorial【FRPpiping】 *Please turn on CC subtitle in setup*

FRP Butt-Joint Fiberglass Kit is a package of fiberglass strips precut for FRP technician on the field or shop as ready use Fiberglass reinforcement to fabricate Butt-Joint FRP Pipes and Fittings lamination without going through time consumed preparation of cutting different types and sizes of Fiberglass material.
The specifications meet PS 15-69 “Custom Contact-Molded Reinforced Polyester Chemical-Resistant Process Equipment” minimum total width. It is for customer’s option to select suitable pressure type of kits for joining both FRP Hand-Lay and FW piping system.
All fiberglass materials are the highest quality commercial grade meet FRP industry and Marine standard. It can work with almost all types of Unsaturated Polyester and Epoxy resin.
For more product information, please visit www.frppiping.com.

[@khoironabdul9456]

THANK YUO VERY MUCH

[@JOEGGGJOE]

I would of wrapped a strand/s of woven roven in the beveled gap first with the slurry mixture you made. That slurry is more of a filler with no strength properties.

[@WanXinFRP]

We are specializing in the manufacturing, design and development of various FRP products, including FRP pipe fittings, FRP flanges, FRP Elbow, FRP grilles, FRP storage tank containers, FRP winding equipment, FRP pipe molds, etc.,

[@wakar93]

Good jop grp pipeline ❤

[@geabea2806]

Agree with comment above regarding pre-gel / bog used in the beveled area of join. Even rovings wouldn’t do a great deal. There’s no extended stagger or graduation in the additional layers , no mention of overlap length or the stagger of overlap locations ( 12 o’clock- 4 o’clock -8 o’clock) let alone the fact that it’s CSM used in joining laminate! Use triaxial weave with the uni running along join , 20% over lap and increase ply width each layer . Remove air by screening by hand massage then wrap in stricture ( high temp stretchy clear film ) to consolidate . Use peel ply between laminate and stricture if coating necessary otherwise coated or add additional laminates within green stage of cure ( chemical adhesion ) OFFSHORE OIL & GAS method

[@MarcosAntonio-ec6wv]

Neste caso ae eu uso foi rolving pra Barreira Química

[@muhammadazlankamaruddin8798]

how many layers that i need to wrap with fibreglass sheet on 2",4",6",8" & 16" diameter of frp pipe?

[@macktyler5268]

I have a 4” pipe that sticks in a 30” frp pipe or it’s actually the underground sewer but I need to make a frp weld wrap where the 4” branches into the 30”. I’ve got all water stopped, I have the old existing weld ground off and it’s clean. I will put putty in the 1/4” crack before I weld. My question is does anyone know if they sell a 4” branch connection kit. I’ve not done this in 25 years but I believe I remember just using a kit and cutting short pieces with a split in them half way into so it can adhere to the 30” and 4” and same time or rather go on around the connection. Just a shot in the dark if anyone understands what I posted and if anyone has purchased a branch connection kit

[@cheyennemedicine2853]

What is the clear paper used to lay the material down?

[@balasubramanian8738]

What are different tyoes of joints used in frp piping

[@balasubramanian8738]

In how many ways the frp pipe spools can be joined

[@johnveloz9640]

How long do you allow each stage of epoxy to set/dry?

[@litekcomposites921]

Apologised for the late reply. we are using vinyl ester and it take appx. 2 hrs to dry

[@user-jd3td3ce9m]

ممكن مترجم عربي

[@angkiykumar6792]

All chemical name

[@shohelrana30]

পাইপিং ল্যাবরেটর এর কাজের কেমিক্যাল গুলোর নাম কি ভাই

[@shohelrana30]

কোন কেমিক্যাল কতটুকু দিলে কি হয় একটু জানিয়ে দিন

[@Emezepe3]

What are some good tools to have for this

[@nivethamathi4589]

wantad irutha sollaum

[@vapaustuonelassa]

Muovia, muovia, muovia.... Nämäkin Käytössä "ehkä" 100v Mutta ongelmajätteenä vielä varmaan miljoonan vuoden jälkeenkin...

[@hamdihamaadi6051]

Pourquoit le mastique c'est une faute

[@syedsansar3064]

What they are putting white second layer

[@worldnews2893]

Pls tell the resin formula

[@sunjune6215]

WORLD NEWS உலகச் செய்தி resin ke enna formula venum?

[@Perintis062]

Salam.. I am from indonesi

[@sunjune6215]

Tis is useless video... to be frank... at site condtion hw can u do tis kind of lamination by rolling pipes..tis lamination luks like surgery being done inside an ICU...

[@malkinsz80]

1 step - train Step 2 -tissue mat + 3mat, and press this program into the chamfer. 4 step putty 5 step train 6 main program Making a chamfer to fill it with putty is not right !!! If you are not going to put a protective layer with tissue mat, then it makes no sense to make a chamfer!