FRP REMOVE| HUAWEI Y6 Pro 2019 (MRD-LX2) Unlock the Device to Continue Google Account Bypass (TP)

The Long Wait is Over, Today we will rise your HUAWEI Y6 Pro 2019 Unlock the Device to continue back to its normal thing.
First thing first, you need to download this file: drive.google.com/file/d/14aGS...
How to Bypass FRP/Google Lock from Huawei Y6 Prime 2019 MRD-LXF1/LX2 model:
1. Disassemble phone (take out SIM tray, remove back cover, disconnect fingerprint flex)
2. Disconnect BATTERY!!!
3. Open SP_Flash_Tool_v5.1824_Win and select DA, Scatter and AUTH file as shown in the video tutorial
4. Go to Format Options and Select Manual Format, input Begin Address and Format length - check Y6_2019_FRP_WIPE.txt
5. Connect Test Point and USB cable to phone (DO NOT connect the cable on PC/Laptop for now)
6. Click Start on Format Options and Connect USB cable on PC/Laptop - MediaTek USB Port will appear now and FRP partition will be wiped
- If you see MediaTek Preloader Port instead, this means Test Point is wrong or it timed-out - TRY AGAIN.
- DO NOT FORMAT any other Partition or DO NOT ATTEMPT to Upgrade/Download firmware if your phone has ONLY FRP/Google Locked.
- This FRP/Google Lock Bypass procedure is RISK-FREE (if you follow it properly). However, I WILL NOT be held responsible for any brick.
- DO THIS ON YOUR OWN RISK, OF COURSE!
Enable Developers Option, Enable OEM Unlocking
and do Factory Reset After Bypassing FRP
FRP BYPASS TOOL: bit.ly/2MtfxtC
Disclaimer:
All videos on my KZbin channel are for educational purposes only and/or to help people unlock their phones who forget their Google Account. We do not tolerate or promote to unlock stolen or barred devices. DO NOT USE THESE VIDEOs FOR ANY ILLEGAL ACTION.
Please Subscribe!

[@FRPREMOVEDG]

Thank you for passing here By: Im DG sorry for making you all wait heres the direct link fot his file: Hope it help thanks for watching all my Content :) drive.google.com/file/d/14aGS70dJUWFRlwwS6jKoht0jHVz3l8qQ/view?usp=sharing

[@johaimaariman8736]

Tested With HUAWEI Y6 PRO 2019 MRD-L22 THANK YOU SO MUCH

[@HonkForLife098]

Worked on MRD-LX3. Thanks a lot!

[@FIREWIRECOMPUTERSHOP]

It worked!! Huawei y6 pro 2019 THANK YOU VERY MUCH!

[@joebertolarte1116]

Thanks bro 100% working big thumbs up to you and more power. God bless

[@htainlin4080]

Thanks so much it really work on MRD-LX2

[@markjobbylabrinto9096]

I know, a simple thanks is not enough but you don't know what a big smiles you put to our faces for this tutorial.. ThankYou Bro..

[@FRPREMOVEDG]

Thanks for appreciating the works brother, it's my pleasure to help you

[@paulvincentlaggui5]

Thank you Brother for this tutorial.. 101% legit..

[@FRPREMOVEDG]

Thank you for appreciating the work brother

[@zawmin1657]

100% working. Thank you very much

[@giz644.]

Thank You. this was so much fun doing.

[@BK1LINEBD]

thank you y6 pro lx2 done 10000% tasted

[@zakarialabaalli7308]

brother please respond me , is it necessary to open the phone , what will happen if i didn't open it and i did the same what you did in the video

[@frmgadget4292]

do we need a dongle to perform this or just a pc and the package you show ?

[@FRPREMOVEDG]

Its just spflashtool and file brother, no need box/dongle, follow carefully on formatting, goodluck

[@jcampride7465]

thank you 100% working!!

[@christianfranciso23]

Thank you sir..it's working to my huawei mrd-lx2

[@aakeelmohamed9760]

Thanks bro. 100% working as fine.

[@emanuelrigordimapilis6057]

Thank You So Much Brother.. GOD Be With Us! Kipitup!

[@FRPREMOVEDG]

Always welcome Brother, Please support our small brain channel

[@bentong1252]

thanks bro...keep up a good wprks,God bless i fixed my phone now.

[@FRPREMOVEDG]

Happy to help

[@raskiblogtech]

thank you 1000x... this tutorial is veryvery helpfull,

[@FRPREMOVEDG]

Glad it helped

[@noralibato2664]

thank you bro y6 pro 100% done

[@012002biscuit]

100% Working! Keep on sharing and God Bless!

[@FRPREMOVEDG]

Verniel Broñola thanks for appreciating the work madame

[@gsmabirnc3365]

working FRP Done 100% tnx bro

[@overburnedburned4698]

this method worked for me! Thanks !

[@FRPREMOVEDG]

Alright congrats brother you did a great job, and thanks for passin here by please stay tune for more useful tips and tricks

[@DEADPOOL-uq2wg]

Thank you still working 15/08/2023

[@die_go6045]

What do you hold with pliers? And the program that you upload to your computer needs the phone to be connected to usb? Thank you for your time

[@FRPREMOVEDG]

Good to have you here brother, It's not a Pliers, it is what we called here tweezer, It is what we use to pin our test point so that the computer will recognize your device MediaTek USB Port, yes it needs to be connected to your PC USB port

[@die_go6045]

@@FRPREMOVEDG So isn't it essential to do it?

[@FRPREMOVEDG]

Diego DP fortunately yes brother

[@FRPREMOVEDG]

Diego DP the guide was there, you need to be more vigilant to do it. Again thanks for having you here, if you a have a concern you can follow me at out social media account especially facebook

[@die_go6045]

How to disconnect fingerprint flex? And where is the SP Flash Tool?

[@gersonlumapak4783]

thanks still working ❤

[@tajkyatv]

Thank you Brother

[@pritsjoshuaquidon71]

thank you,its working tested 100%

[@FRPREMOVEDG]

Thanks for passing by brother

[@BinnOfficial20]

Thank you very much!!

[@onintechgsm8350]

can u please upload the stock rom,,the zip u upload is bypass apps not in sp flash tool

[@FRPREMOVEDG]

Yes brother it was for FRP bypass I dont have any stock rom yet

[@ibrahimslimani1826]

i have y9 2019 (jkm-lx2) with the same security patch level october 2019 . Any idea how to bypass frp ?

[@FRPREMOVEDG]

ibrahim slimani we'll find some devices brother and soon we will upload a solution for that. Keep tuning to this channel, thank you for passing by

[@FRPREMOVEDG]

Did you try this method brother? kzbin.info/www/bejne/p3vUdGpqbsanfbs

[@ibrahimslimani1826]

@@FRPREMOVEDG Till now nothing worked ( proxy . Emergency call . Mobile data share . Safe mode ) October patch security is a nightmare brother.

[@FRPREMOVEDG]

Is it unlock the device to continue?

[@ibrahimslimani1826]

@@FRPREMOVEDG yes brother . Always the same.

[@romano_01]

Thank you sir 👍👍😀😀😀

[@edrenzhguanco2581]

thanks its all work 100%

[@angelshine3470]

thanks bro very usefull

[@asp-mhenaplak6381]

thanks Bro working for me..

[@salamero5391]

Can i use updated sp tool

[@leonardmajua7875]

Really helpful

[@marazarez1934]

sobrang thanks uou po sir

[@DARKNESS19906]

Bro your a leget thanks so much.......😃😃😃😃😃😃👍👍👍👍👍👍👍

[@FRPREMOVEDG]

Yes brother Iam Legit! Legitimate, thanks for passing by

[@jack6.0_15]

Thumbs up for this file!!!

[@EdisonTechnician]

Why after the flash done go to deadboot

[@damboy8772]

Do you havw tutorial huawei mrd lx2 loop on e recovery?

[@FRPREMOVEDG]

Lookin forward to upload that soon brother, Please stay tuned to our small brain channel and do visit also our blog frpremovedg.blogspot.com/

[@jhesielvlogph585]

Thank you gumana sakin

[@gadgetfixsamal7537]

how to make my y6 pro 2019 seen in the device manager? not working fo me :( plssss help

[@FRPREMOVEDG]

You need to download and install mtk driver brother and make sure your testpoint is correct

[@digitalbdtips4616]

its warks 100% tnx

[@malindawijesena5750]

love you sir thanks lots

[@FRPREMOVEDG]

No Brother I love you, thanks for supporting this channel

[@wilmarxproduction2432]

bro i dont have tweezeer can i use any metal object ??

[@FRPREMOVEDG]

Yes ofcourse brother you can use even fork just be careful with the testpoint

[@de_realbosiako.6615]

Please am not seeing the safe mode on my phone Please help me

[@dadosduran6620]

hi sir you have a android scatter fastboot?

[@FRPREMOVEDG]

Thanks for passin by brother, unfortunately I don't have any

[@maricarsalas9805]

nice thank you..

[@juliusbernaldez395]

Yow. I not that kinda techie as you are guys.. but my daughter's y6 pro is not working anymore.. she doesn't remember her Google account.. could you guys help me ?

[@FRPREMOVEDG]

Just Follow and understand our video carefully, or just consult any repairing shop near you and let them do the job for ya, thanks for passin here by brother

[@toptv4332]

Tks pro 15/11/2019 done Y6 pro lx2

[@FRPREMOVEDG]

Thanks for appreciating the works brother! Cheers

[@simplelife9563]

thanks bro

[@gsmabirnc3365]

tnx

[@sulemanrumey9276]

Tnanks

[@markloren7766]

Hi can i know what driver can you used?

[@FRPREMOVEDG]

You may use MTK Driver brother you may search it over the net

[@jheraldsusal6695]

thanks sir still workng

[@reyseledio2323]

Do u have any files for huawei y6p mt6762

[@FRPREMOVEDG]

Sorry Brother, But I didn't have one yet

[@micahangelsudario2915]

How about y7 pro DUB- LX2 file?

[@FRPREMOVEDG]

Hi pinay, thanks for passing by, I have no yet file for that, looking forward to upload as soon as I could

[@rafaeljuangco5785]

it didnt work to my huawei y6s.. it says ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC00600001) do you have any idea? thanks

[@FRPREMOVEDG]

Y6s is a different model brother, be careful on doing this on other device it may cause your device brick

[@safesound5831]

same error. my device is MRD-LX2. anyone can help?

[@safesound5831]

and also copying at begin address wont do just like u did, i need to type it manually. why is that?

[@safesound5831]

@@FRPREMOVEDG any idea bro? why i recieve same error even my device sa y6 pro MRD-LX2

[@FRPREMOVEDG]

@@safesound5831 Make sure you all files in the designated location DA, Scatter, and Auth is located on the same folder and repeat the format process again Goodluck brother

[@royalblue9932]

Hello po kuya pano po yung flashtool idodownload ko ba sa laptop ko? Kailangan ko na po kase phone ko sa online class sana matulungan moko

[@FRPREMOVEDG]

Thank you brother for passing here by, you need pc for that, if you knew what you are doing, then proceed if not, dont take the risk, consult your nearest technical support and let them do the job for ya, good luck brother and good luck to your class

[@shirikliffangelrevalde4298]

Sir please update the link,new subscriber

[@polashray]

MRD LX1 / MRD LX2 SAME BRO ?

[@FRPREMOVEDG]

Yes brother mrd-lx2,lx1,lx1f supported

[@marfcan4175]

Do i need to backup nvram first?

[@FRPREMOVEDG]

Not necessary brother

[@FRPREMOVEDG]

By the way thanks for supporting our small brain channel

[@mheljamesviscayda]

Still working 2023???

[@kahitanolangletscraft]

bro i followed all the steps and it indicate's successful but after i plug out my phone from computer, it didnt turn back on, pls help me what to do, when i plug in to charger the light red apears but suddenly blinking and nothing happens after that pls help

[@FRPREMOVEDG]

You maybe have problem on some procedure and to be exact on format phase, be careful on the format process it will kill your phone, try to search for unbrick file brother, we'll find ways to help you out.

[@kahitanolangletscraft]

@@FRPREMOVEDG thanks bro for the reply i found some method about sending img file on recovery mode, but i need a firmware of huawei y6 pro 2019 that have a boot.img userdata.img recovery.img when you extract it, i tried extracting several update.app files but i did not found what i am looking for maybe you can help me with it?

[@FRPREMOVEDG]

update app will only work if your device is still running brother, now you need to find firmware to unbrick your device, unfortunately as of now I didn't encounter that yet, dont worry brother, we will include of flashing or unbricking when I get one, Don't loose hope you can do it brother

[@kahitanolangletscraft]

@@FRPREMOVEDG ok thanks bro

[@jaryedbautista7977]

I cant download the file, how can i download it sir?

[@FRPREMOVEDG]

Just skip ads showed in adfly then the download link will appear, login to your google account to download the file

[@nuwanwijekoon6860]

How to short it my mobile not short not connected pc why

[@FRPREMOVEDG]

If youre working with new version of this kind, maybe some proccess will not work brother

[@navaskandanakam]

How to bypass honor 8s ksa-lx9

[@FRPREMOVEDG]

First thanks for passing by brother, I didn't encounter that yet, stay tuned and we'll upload a solution soon enough, as we encounter that thing, again thank you for passing by

[@royalblue9932]

My phone is y6pro v7.3.0.2 what app shouldI install to my loptop to recover my phone

[@FRPREMOVEDG]

All files and tool you need is in the description

[@royalblue9932]

But how to do the test point? I will plug the USB cable when I already press the test point?

[@FRPREMOVEDG]

All instruction was already in the video

[@dessalatigay2955]

Need po b talagang kalasin?

[@FRPREMOVEDG]

Yes it was, this method is risk taking so its better to consult your nearest repairing station and let them do the job for ya! Thanks for passin by

[@junrymagcalayo2843]

nice

[@DARKNESS19906]

Iam subscribe you're channel.......

[@FRPREMOVEDG]

Thank you very much brother

[@lucidgaming2.038]

Mar lx2 unlock device to continue p30 lite any solution sir?

[@FRPREMOVEDG]

As of now I cant I didnt encounter that yet, but will upload as soon as i could brother, by the way thanks for passin by

[@lucidgaming2.038]

FRPREMOVE DG thanks sir

[@edsonmorales2218]

Sir no matter how long I"m connecting the test point to the ground, It"s not been detected.

[@FRPREMOVEDG]

It didn't takes too long brother, it takes only a few sec.make sure driver was installed if you don't have one consider to download and install one. androidmtk.com/download-mtk-usb-all-drivers

[@edsonmorales2218]

@@FRPREMOVEDG Sir do you have any idea about this error I'm getting? "ERROR:STATU_BROM_CMD_STARTCMD_FAIL (0xC0060001)"

[@FRPREMOVEDG]

Edson Morales I didnt encountered that thing, make sure you follow the step carefully, goodluck

[@danilynpace828]

icant paste the begin address

[@FRPREMOVEDG]

Be careful with the instruction it may lead you to brick device, we have instruction in our description box

[@cheannelangelabargados1238]

Need Po ba may loptop?

[@FRPREMOVEDG]

Yes

[@lesterdimla8638]

error : status_brom_cmd_send_da_fail (0xC0060003 PLEASE HELP

[@FRPREMOVEDG]

the address is incorrect+, make sure you select DA, scatter and auth file on our firmware folder

[@samanthamusset7623]

Bonjour après 8min 40 rien ne ce passe pour moi aidez moi svp

[@FRPREMOVEDG]

Hi, first thanks for passing by, did you downloaded the file we require and follow the video above? if you do, there's something in your process, just do it again and follow the process carefully

[@ronescolbernados]

I do not know how to do it.

[@FRPREMOVEDG]

Better to consult repairing center near you and let them do the job for ya

[@daviddelacruz5755]

unable to open zip file, damage

[@FRPREMOVEDG]

Please try to install 7 zip and extract brother

[@rawanddler]

My brother there's no way to do that without using The testPoint

[@FRPREMOVEDG]

No other solution yet Brother

[@danielando6837]

100% legit just follow the video guys!

[@jrsmith3265]

sir pls check the files..error file extract sir after download

[@FRPREMOVEDG]

Download 7zip and extract it again

[@otepmo5478]

Bro may iinstall pa ba na drivers? Or theres any drivers need to install?

[@otepmo5478]

Bro may iinstall pa ba na drivers? Or theres any drivers need to install?

[@clesterbaladad5491]

Bosa unlock device pa din sguro yan last option sp flash

[@FRPREMOVEDG]

Clester Baladad this method only works on huawei Y6 2019, this method is tale your own risk, goodluck

[@devilbhai2529]

chip misnatch scatter mt 6761 device mt 6761

[@wilfredcalunod]

dead link please update thank you :)

[@mevzradke9157]

required talaga baklasin ang likod idol

[@FRPREMOVEDG]

Yes Brother, this will connect your phone via testpoint

[@lesterdimla8638]

wheres the link for firmware

[@FRPREMOVEDG]

Please read the description, the file was already there, just keep lookin

[@lesterdimla8638]

bror errom da file apperead

[@FRPREMOVEDG]

@@lesterdimla8638 I got this, please read and understand the process carefully, goodluck

[@khimtantiado9365]

Thanks bro

[@FRPREMOVEDG]

Brothers, take time to read this on description: "First thing first, you need to download this file" the file link was already there! Thanks for your support!

[@AbdulRehman-ek5nv]

From where i download this music NCS

[@FRPREMOVEDG]

@@AbdulRehman-ek5nv go to studio's audio library brother, from there you can choose your music

[@boonesimon3712]

i guess it is kinda randomly asking but do anyone know a good website to watch new tv shows online?

[@keithemilio8888]

@Boone Simon lately I have been using flixzone. You can find it by googling =)

[@greyimmanuel2193]

@Keith Emilio Yea, have been watching on Flixzone for since april myself :D

[@devilbhai2529]

chip mismatch scatter mt 6761 athen mt 6761

[@FRPREMOVEDG]

Make sure it was the same model number brother

[@ainyhanapi3641]

please help po sir exact problm po :(

[@FRPREMOVEDG]

Hi pinay, Good to have you here, please read the description and follow it very carefully, Goodluck and thanks for passing by

[@adriancaayon6769]

bro im always stuck at calibration..doesnt load to format..pls help

[@FRPREMOVEDG]

First thanks for passing hereby, brother, If you follow the process until 6:15 you will see how to load the file

[@adriancaayon6769]

i cant download the frp tools..can you give me the link??

[@adriancaayon6769]

all i can see is apps..or apk files..

[@adriancaayon6769]

@@FRPREMOVEDG does it need drivers??

[@FRPREMOVEDG]

@@adriancaayon6769 Just keep reading brother, I know you will get it

[@ittechrobi]

Download link not working 😠😠

[@FRPREMOVEDG]

Link is now updated Brother

[@teegee3000]

👊🏼

[@justrosetv1931]

ERROR: STATUS_BROM_CMD_STARTCMD_FAIL (0XC0060001)

[@FRPREMOVEDG]

Follow the Guide carefully brother! Make sure driver is installed

[@justrosetv1931]

@@FRPREMOVEDG, thank you! done already...

[@justrosetv1931]

i subscribe to your channel... thanks

[@TeamMacthai112]

ERROR STATUS_BROM_CMD_STARTCMD_FAIL(0xC0060001) HINT

[@FRPREMOVEDG]

make sure you follow the video carefully brother, make sure driver is installed, good luck

[@solaimanomar2202]

What the password of file extract

[@FRPREMOVEDG]

no password

[@solaimanomar2202]

Uk bro thank you

[@amjadamil]

10000% ok

[@FRPREMOVEDG]

Thanks you for appreciating the works brother