F30 & F22 Owners: WATCH THIS Before Installing Coilovers on your BMW

[@Pa-hy1te]

Awesome video, the best so far in regards of installing coilovers for bmws!

[@andrxito]

loving the Alu jack stands, really great weight/weight ratio

[@theman3343]

FYI, KW is very finnicky about warranties on the V series coilovers if the damage is a result from tracking the car. Another great install video!

[@FritzRamos]

Good to know. Thanks for sharing!

[@nofilter2091]

So much good content Fritz, great video.

[@FritzRamos]

Thanks for always showing your support! Glad it was helpful

[@rubenramos-wp4nw]

I‘m upgrading mine to a V3 Clubsport i was thinking about Just the V3 WO the clubsport but it‘s only 300$ more than wo so i have it if i need it 😂

[@FritzRamos]

With the addition of camber plates and the reduced stress of not having to compress the OEM spring I would say it's worth it. Plus the improved handling!

[@IAMMEMARIANA]

Omg thank you so much! I will be doing it my self for the first time, wish me luck.! 😅😊

[@FritzRamos]

You got this!

[@Tainami_]

How did it go? I would love to do this, but my mechanical knowledge is very limited.... aka I can do an oil change lol

[@typejlb]

How long was the installation time? Seems pretty straightforward.

[@andrxito]

I prefer to buy new top hats to preassemble the whole strut. It gave me huge peace of mind to have a fully fresh coilover from top to bottom

[@FritzRamos]

Good point. I would just recommend camber plates if the person is trying to fit wider wheels in the front, since the 2 series has so little space.

[@thekillerking7393]

Amazing video! Hello from Spain 😚

[@FritzRamos]

Thank you.

[@RentableSocks]

What's the status on those end links? I'm going to put the kw v1 on my f32 xdrive with a set of the vorshlag camber plates, wondering which end links I'm gonna be needing

[@lucian_7588]

Great work man !

[@concordlo9707]

Hello Fritz, thank you for this amazing video. The way how the front absorber removal is so creative and impressive. I would like to ask for the connection of rear absorber and camber arm. On TIS, this connection was recommended to be tighten down with 100NM and jointing torque of rotation 90 degree, (the car in normal position). What this procedure means? Thank you~~

[@chriskamen2152]

I am having coil bind on my xdrive 440i with KW DDC coilovers right now... very bad, after adding millway street camber plates. Any thoughts?

[@FritzRamos]

I can only suggest adjusting the spring height. It might be "out of spec" from what KW recommends but that recommendation is based on the OEM top hat. Aftermarket top hats might sit further in the strut tower. At least that's what KW told me. Start at the max recommend height then go up by 2-3 spins at a time. That's how I did it when I got the swift springs. The video below might be more helpful. kzbin.info/www/bejne/a3i4hJ-siLmhZrM

[@DarkComputer9090]

I have a 13’ 740i. Would it be possible to have an air suspension delete and have coil overs or regular springs installed??? 🤔 Each air strut is around $1300….

[@jamesksjsu]

Why did you switch out the DDC for the V1? I own a 2016 228i and really want to put on the DDC for my car to get the lower ride height, better handling and keep the EDC.. would you recommend it?

[@andrxito]

I own the DDC on my 140i. I really enjoy it. Lowering the car enough to never scrape and is still really comfortable. Not softer than OEM on comfort mode, but it does the job really well. On the other hand the car feels like it is on rails in Sport mode. way better at cornering. Extra points: the KW DDC weighs less than the adaptive by almost a kilo on each corner

[@jamesksjsu]

Now I really want it even more! So you would say overall it is an improvement from oem? No troubles switching from diff modes? I think that’s a really cool feature and don’t want to lose it..

[@FritzRamos]

I still have the DDC on the m235i these V1s for the 228i since it does not have EDC. I am very happy with the DDC and would recommend it for your car. If you have a front lip I would get a 225/40 or 235/40 tire if you're on 18's and don't want to scrape. These are the ones that I currently run. bit.ly/30PQbOf

[@FritzRamos]

Well said.

[@andrxito]

@@jamesksjsu recommend it 100%. I run 18x8 et40 on 225/40 and it is good. I installed a strut brace at the same time and it further improved the steering feel.

[@settounite]

Hey Fritz can you tell me why i can no longer use the OEM existing endlinks anymore? I want to do this DIY but in my country i dont have Access to the endlinks which you used in your video. I can only source OEM parts or Aftermarket ones which are not adjustable like your endlinks. Any tips?

[@timkebienda1809]

What do you think of the b12 ?

[@FritzRamos]

Bilstein is a good company. You're really splitting hairs between them and KW's performance. I went with KW because at the time they seemed to have better customer service which might come in handy if I need to go through the warranty process.

[@timkebienda1809]

@@FritzRamos OKay thank you. I've not heard of KW until watching your video.

[@anthonytayal]

Have you got the link for the end links or do those work?

[@BoBo-z2b8b]

Don't need to change bolt and nut?

[@dedan2]

What is the tyre size in the video fritz? 225/40/18?

[@FritzRamos]

Yes, 225/40/18 square

[@baronmunchausen645]

Hi Fritz, I’ve installed b14’s on my m240i. My driver’s side (rhs here in Australia) is sitting 14 mm lower than the passenger side with the same height on threads. Rear is perfect. I can’t figure why. Why do you think that might be? Thanks

[@TK-gd9td]

Did you get new adjustable roll bar links and control arms and tie rod ends? cause those need to change size to properly fit with the new lower suspension geometry. Otherwise you’ll have uneven suspension and maybe even some bump steer or drifting to one side

[@baronmunchausen645]

@@TK-gd9td I’ve figured it. One of the struts wasn’t fully sat in the knuckle

[@maxforster9892]

Hey Fritz, i really need your expertise advice on my headunit. Its a 10.25 android screen, for the F20 BMW, have sent you a video on instagram to explain, thanks in advance.

[@AlfaSixxx]

Love the videos mate! Would this install be similar to the F30 series?

[@FritzRamos]

Yes it is.