FS2020: How to Set-up the Hat Switch to look around freely in External View - like FSX and X-Plane!

[@themtoniraniremaxbroker2447]

You Have Single Handedly Helped me by doing a Splendid Job of Explaining in such Detail. I am now really Enjoying my flying immensely and That is Thanks to you Sir! This Even Works with Airbus!! Wow. Much Appreciated from Toronto Canada! Super!! I might have to skip work for a Week!! Thank you very Much!!

[@Huddison]

That's an amazing comment 😉

[@easternhops]

@@Huddison wow I never seen a youtuber reply back to comments as you do cheers to you and for the great videos

[@Huddison]

@@easternhops I feel it's important to respond; after all, I'm only doing this because of you chaps 😉

[@themtoniraniremaxbroker2447]

Your Explanation is Simple with NO Confusing Jargon. I come back to your site very often , just to Refresh. Thanks Again.

[@Geoweb35]

Hi, thanks for this video, you also need to set in General Settings > Camera > POV RESET to MANUAL if you want to use HAT Switch to control External View

[@G_de_Coligny]

THANK YOU That was driving me insane…

[@littlebearstudios]

Thank you, that was my issue!

[@infinityarts2763]

After many years of FSX adventures, just few hours ago I got MSFS with an annoying attitude, gratefully I found your tutorials and already makes me feel home like FSX, now I can enjoy FS even more, stunning views indeed plenty time to discover as I started with FS2004 ! Let the Flight adventures go on ! Thanks pal

[@Huddison]

Fantastic comment - glad to be of help ;)

[@stevehughes4400]

Great help! Thanks for doing that video. I was so frustrated that I couldn't get my HAT in FS2020 to work as it did in FSX. Now it does! Now I will review your many other FS videos and will stay on top of your contributions going forward. Thanks for being there to help us.

[@Huddison]

Wonderful comment; thanks to you too.

[@glennmullis1477]

Thank you! Thank you! Thank you a million times!!! I have hated the "view"system in MSFS every since my first flight... basically bad enough that I just don't fly the new sim. Using your incredibly detailed (and very easy-to-understand) video, I now have a fully functioning hatswitch like I have enjoyed for decades in my beloved FS2004 and FSX. You have made me incredibly happy! Thank you so much!!!!! -Glenn Mullis

[@Huddison]

You're most welcome Glenn :)

[@jackbailey3156]

I have owned MSFS for eight months and have been using and hating my mouse for external views. You SIR have totally transformed my world.

[@Huddison]

Glad to be of help ;)

[@MrAndrew1000]

Huddison, recent subscriber and MSFS 2020 user here. Just want to say a huge thank you for videos which are not only always relevant and helpful, but also very clearly presented and explained. THANK YOU!

[@Huddison]

Wow, wonderful comment - thank you Andrew! 😊

[@bradhaines5711]

If you ever come to Western Australia I'll buy you a beer or two and shout you out for dinner. You have helped me immensely. Thanks

[@Huddison]

Wow deal! ;)

[@GerdKossack]

thank you very much . These settings make flying even more confortable as I like to use the external view more than the cockpit views

[@Huddison]

You're most welcome.

[@terrafly204]

Excellent explanation, clearly and simply set out and has helped me a lot.

[@Huddison]

Thanks George.

[@RevNicholasJonsson]

A superlative and most informative video on MSFS sir!! Thank you for ALL your videos on MSFS... they continue to be my go-to source for all my questions on MSFS 2020

[@Huddison]

Happy to be of help Nicolas :)

[@PeterNGloor]

golden age ist a good way to describe FSX, as there everything "view" was easy and straightforward. Thanks for your viedeo

[@AcesDwn1]

Glad you mentioned that it's ok to have something bound in two places. I stumbled upon that myself, but it would have been nice to know ahead of time back when I set it up. I think this will be very helpful to the newer simmers for sure! Nice vid again! :-)

[@Huddison]

Thanks Aces, appreciate it :)

[@jamesparry3122]

Going to be setting my TFRP up tomorrow, can’t wait to try them! Thanks for taking the guess work out of the device setup nightmare stage, your suggestions are spot on. I’m so glad I joined Huddison for sure! Now I have to get to bed , I’m hooked so bad I’m losing sleep staying up late flying ! (And No I’m not complaining one bit!)

[@Huddison]

Lol it is addictive isn't it ;)

[@theaviationastronomychannel]

Thanks so much man!I've always been using quick views and it sucks compared to the fsx cams but now it's so much better because of your video thx!

[@Huddison]

Great to hear.

[@jfsnyder15]

Great video, I've watched this video and the drone video, learned so much. Great job sir, make MSFS 2020 so much more enjoyable. On to the cockpit camera setup with I assume is the same as the hat switch video. Thanks again!

[@Huddison]

Thank you, it is indeed the same hat switch. It's always great to hear feedback like this!

[@ELR1-C]

Simply Awesome! This was doing my head in! Thanks to you, as usual you have made it a simple task. I'm learning so much from your vid's

[@Huddison]

Thanks ;)

[@davegrams1438]

Thank you. Even coming back to MSFS2024 and trying to configure the external view via Hat Switch - this video is very helpful. (Can't remember how I did it 4 years ago...haha)

[@Huddison]

Glad it helped!

[@yassermian9913]

Simply great. There should be an option in MSFS to print all your keyboard/hotas assignments.

[@Huddison]

That's a great idea!

[@yassermian9913]

@@Huddison I am having a problem when i launch MSFS (after formatting ssd and install) i get message "You are missing packages that are essential to run..." i have reformatted twice and installed FS twice but same message. any idea please?

[@Huddison]

@@yassermian9913 Try our Discord - lots of helpful tips in there.

[@yassermian9913]

@@Huddison thanks for reply. So i reformatted ssd twice and installed FS twice in one day no luck. I did not modify any config files or fiddled with any thiing i just left them as it is and turned off my system. Next day when I ran FS i saw Installation manager screen and it started downloading mandatory update 12. Lets see how it goes its still downloading.

[@VHKDK]

Very easy to follow and clearly spoken, thanks very much. Liked and subscribed.

[@Huddison]

Thanks, appreciated.

[@howardmoscovitz9353]

Thanks so much. Your explanations are very detailed and helped me very much.

[@Huddison]

You're very welcome :)

[@CHROME098]

Thanks very, very much. After one sees what you explain here, it all seems so simple and logical. It is, But it is not intuitively obvious. Without your effort to produce this vid a lot of us would still be flying around wondering how to make use of the hat switch. Do you have any advice for setting it up with the drone camera? Thanks again. Your teaching style is just perfect. don't listen to people who say it needs changing to "a less redundant style. It is good to cover every key-stroke and mouse-click at every step like you do.

[@Huddison]

Thank you Don, your comment means more than you could imagine :) Here's my Drone Camera settings video :kzbin.info/www/bejne/Y5vPhGWlpdtjoZY

[@Dragnhorn]

Thanks you so much! Just what I was looking for and easy to follow.

[@Huddison]

You're welcome!

[@jakeroth5809]

Omg thank you I been trying to set this up you are the best!!! Subscribed and liked thank you for sharing

[@Huddison]

Glad to be of service!

[@scootermason2746]

I did the very same thing with the cockpit view. Now it works like FS9 and FSX. Now I can look around freely inside.

[@Huddison]

That's great!

[@MD90Tech]

Excellent kind of video, - you solved my problem! But really, - it could have been at least 4 min shorter until you got to the juicy part.. ;) Anyway - big thanks! :)

[@Huddison]

You're welcome!

[@bstikkel]

Additional info: one can also set the movement speed via the in flight camera menu. My experience is, the speed sliders have to be set rather low, to reach a workable movement speed. But maybe that differs per system.

[@Huddison]

Excellent addition - thanks!

[@bstikkel]

@@Huddison I only just noticed, MSFS does not remember the settings after shutting down. Probably it would if one hand-edited a settingsfile, but I think for the time being I will keep changing the slidersettings.

[@Huddison]

@@bstikkel Yes I expected that - still, it's not to difficult to change the sliders each time.

[@jeanverbist1754]

Hello, wonderful tutorial. Followed your advice, it used to work… But now for some time I have the left, right or whatever direction swirling continuously… The expected movement does not stop, I must have altered some other command…. But where and when..? I even reinstalled msfs completely (a 10 hour pleasure..). FYI I am using the hat switch on my alfa yoke (honeycomb) Tia

[@Huddison]

Are you using the Xbox or PC version of MSFS?

[@jeanverbist1754]

@@Huddison I am using the pc version, I fact the (?) boxed version, 10dvd, (quite a pleasure to install or reinstall ..}

[@tbu1mi]

Sir you have made my day. Thank you so much for your excellent video.

[@Huddison]

Thank you for the great comment ;)

[@kenmunn4421]

Another fine job done with your expertise……😊

[@Huddison]

Thank you:)

[@ramnik.khanna]

@Huddison, Thanks so much for your excellent tuts! I just got my Logitech Saitech G Pro Yoke, throttle and rudder pedals, and was able to successfully reassign / remap the axis and buttons assignments by referring to your vids!! Please tell me, can I assign the same Hat Switch to the Drone camera views too, i.e. the same Hat Switch keys are assigned to Cockpit View, External Camera view and Drone camera view?

[@Huddison]

You sure can: kzbin.info/www/bejne/Y5vPhGWlpdtjoZY ;)

[@ramnik.khanna]

@@Huddison thanks a lot! Another question, are there any changes required in the Logitech flight controller settings / configuration after SU6?

[@johnfournier4341]

Great video! I am a very happy camper! Thanks!

[@Huddison]

Great to hear!

[@normanparke1065]

Again , brilliant, thanks a lot for your expertise .

[@Huddison]

My pleasure!

[@nitwit4947]

Bindings are valid in two places!!!! Who knew...not me. Thanks

[@Huddison]

Yeah handy to know

[@ricktana]

A very informative video. I enjoy your channel. An observation-only, and probably a matter of personal preference, but I think MSFS has their up and down arrows reversed. When I push my hat switch up which is actually forward, I expect to go nose down with the camera just as the nose of the airplane goes down when you push the yoke or control stick forward. The opposite for looking up. I have all my hat switches configured this way in all of my camera and drone views. To me, it just seems natural that the hat switch would act the same way as the aircraft control stick, and confusing to have them opposite.

[@Huddison]

Yes I see what you mean. Thankfully, it's not to difficult to switch/reverse those views in settings.

[@elliotspiegel2968]

Can you give some advice on looking around internally in the cockpit..i.e. to see the AP panel, Throttle quadrant etc.....thx

[@Huddison]

I'll come back to you on this, once I've installed the UK update (it's just gone live!). I think you can press keyboard combinations of Ctrl and 1,2,3 etc to look around the cockpit instruments; but you can likely set these to a joystick button assignment.

[@Huddison]

I'm planning a future video on this- stay tuned!

[@ixoye56]

If you have a 8 switch hat you can use the other 4 like look down and up on each side as well.

[@Huddison]

Yes thanks, I covered that in subsequent videos.

[@chrisadish]

I just did this now. Thanks, like fsx style!! Yesss❤❤❤❤

[@pedroelaleman5624]

Great video! More of it! Thank you so much

[@Huddison]

Very welcome!

[@amovierunner4112]

Great video, I just downloaded Flight Sim 2020 and having some issues getting my Wingman Force 3D to work properly for Elevator & Ailerons that worked as they should in flight Sim X. Thinking of getting the Flight Yoke like you use.

[@Huddison]

See my videos on setting up f light controllers from scratch (amongst others) kzbin.info/www/bejne/d2TTZH6Ed9-hZrM

[@255-southcarolina8]

Thank you very much I enjoyed the video you help me a lot I'm still not through with it I'd like to ask you a question is this a free swell or is this a snapback swell let me know because I do I have having a problem with a snapback swell is there something I have to disconnect like a lot system or something like that thank you very much

[@Huddison]

I'm not certain what you mean by free/snapback swell?

[@JamesSmith-km8xu]

Thanks for your video, very concise and informative, can I just ask you one small thing? I have bound all directional POVs to my X55, but when I press END, I can view the aircraft as you would expect, but the view springs back to the rear view, how can I stop this? thanks Jim

[@Huddison]

Hmm that's an interesting one - I'll give that a little thought; in the meanwhile, you could post the question in Discord as lots of brains there who may be able to help quicker: discord.gg/3kra6JfHZT

[@defect2889]

thank you for the update and video ill give it a try...........

[@bravoone17]

Thank you....Great video! Now I know I can update my hat button to work just like FSX. MikeS

[@shelsmith2001]

That helped so much ... thank you!

[@Huddison]

Most welcome

[@schiphol104EEF]

Hello, in the past it worked by me just as explained in your great video. I used it again as a manual, but since the upgrade with Dune, it does not work anymore. After releasing the hat switch the picture swings back as a spring to the standard position behind the aircraft. Any suggestion what I do wrong or how to fix it?

[@Huddison]

Check under Camera in General Settings: you'll want to set the external camera up as 'Toggle' rather than 'hold'.

[@schiphol104EEF]

@@Huddison Thanks for reaction. I followed your direction and found that the POV stood on auto in stead of manual. Problem solved.

[@garywiley7886]

I was ab;e to set this up with my Logitech Hotas stick. However, I can't seem to get back into the cockpit view. Not sure what I need to change. I can take off in the cockpit view, once I go to external view, just not sure how to get back into the cockpit. Any suggestions? Thank you.

[@Huddison]

The 'End' key on your keyboard will toggle cockpit/External view modes.

[@botchi1]

Thank you for fine videos. I have done exactly what you did. But! I can only rotate 45 degrees from back position. No turnaround. Please HELP!

[@randychamberlain2338]

Thanks for the video. I am having problem with my Logitech yoke. I can fly for a while and then the plane seems to freeze and lose control. do you have any settings that may need adjusted. I have been playing with the sensitivity settings, but have not found anything that changes this behavior. Any help?

[@Huddison]

You may want to alter some of the settings in 'Assistance options' & 'Piloting'. Essentially, turn off AI control of your aircraft.

[@LeovBakel]

Dear Hudisson I followed your instructions for both the cockpit view and external view. The cockpit view works perfect but the external view refuses to stay in place. It always keeps turning around. The settings are as you instruckted. Is there a way to make the the external view the same as the cockpit view using the pov hatswitch.? What did I wrong?

[@Huddison]

That's difficult to say, it could be one of many things. Jump on to our discord for more in-depth help.

[@marblox9300]

Yea, but how do you do it in FSX.???

[@MsFs-Train-BOEING-747]

Hello ,I assign the hat switch for the cockpit view , I follow your instructions for external view hat switch , is there any way to switch back and forth from cockpit to external (I was able to do it on fsx) thank you

[@Huddison]

The 'End' key on the keyboard will do that by default; or you can set up a button on your flight controls: kzbin.info/www/bejne/jZStoGSheMaMoZI

[@MsFs-Train-BOEING-747]

On controller under what name I’ll find the shortcut to assign please

[@Huddison]

@@MsFs-Train-BOEING-747 look through the video I linked in my previous comment; this clearly shows you where.

[@davidreisman412]

Hey...I'm using the CH Flightstick Pro, and this works perfectly for the cockpit view. It also works with the external camera, however after rotating my view with the hat it snaps back to the default position of behind the plane looking forward. Any thoughts HUD? Thanks!

[@Huddison]

Yes: in Options, go to 'General' & then 'Camera'; in there, scroll down to 'Chase Camera' and change 'POV Reset' to manual (You likely have it on 'Auto').

[@davidreisman412]

@@Huddison You're a god!!! You just made my flight simming experience 100 times better!!!

[@Huddison]

@@davidreisman412 You're most welcome ;)

[@NGC008]

Excellent, thanks for sharing. 👍👍

[@Huddison]

Glad it helped👍

[@benbelman7105]

Thank you so much!! Anyway to zoom in like when using the mouse scroll wheel?

[@Huddison]

I often use the mouse wheel to zoom in & out and quite like it.

[@jeanverbist1754]

Bravo for all your good videos. But I have to call for help.. I did apply your advice, and it did work, but it does not anymore! The camera movement does not stop when I hit, say , look left, the camera swirls around the plane, never stops..! I guess I miss something, but what?? Can you help? Tia Jean

[@Huddison]

Hi Jean, is that just in external mode view it does that? I can't be sure what's causing that but come and join the discord to see if others can help there: discord.gg/3kra6JfHZT

[@jeanverbist1754]

@@Huddison no, cockpit view is not working as it did..

[@Huddison]

@@jeanverbist1754 I had that trouble on my Xbox and Hotas one, so I changed the cockpit to quick-views and left the external as pan. It's obviously a bit buggy still.

[@jeanverbist1754]

@@Huddison hello, sorry, not very handy in this « world » , Yes, same problem in cockpit view. I do not want to start looking for the guilty one, but somehow I have this feeling that every update brings its load of changes to one’s settings. I have some proof of that. I was convinced to keep v-sync (in graphics settings) to « off », and yet found it set back to «on » recently. Msfs is wonderful but steep learning. Thank you for any help.. Jean

[@jeanverbist1754]

@@Huddison is there someone else messaging with the same name…

[@raymondgoubet]

Thank you. You got a new subscriber! For the diagonal DL DR UL UR buttons they can work when using the hat but you need to try a few times as the U D L R seem to be picked up more easily... But I have an unrelated problem with SLEW mode: the default L R forward Backward keyboard keys move the aircraft far too much, and it depends how long you press them. Actually, barely taping them move the AC by hundreds of meters! What do you recommend?

[@Huddison]

Thanks😊 I'll take a look at slew controls when I'm home this weekend.

[@Huddison]

The best way I've found to be a bit more precise in Slew mode , is using the default numpad 8 & 2 key-bindings; these only slew the aircraft in small leaps.

[@raymondgoubet]

​@@Huddison Thank you. I actually found better. You see, numpad 8 2 4 6 in slew mode are fast because they are either pressed or not pressed. It's all or nothing. So I assigned the slew command *to the axises of the stick of my joystick.* Because the axises are going from 0 to 100 %, so by moving the stick just a tiny bit, you get small moves, so they are very precise! The slew command are part of Camera - not obvious as you may think it's more moving the plane, than using the camera! To find that out: use search for 'slew' on the left field. So, now: I assigned: SLEW TRANSLATE FORWARD to my stick forward (to pitch down) SLEW TRANSLATE BACKWARD to my stick backward (to pitch up) SLEW TRANSLATE LEFT to my stick aileron RIGHT: for going left you need to go right, as it works inversely SLEW TRANSLATE RIGHT to my stick aileron LEFT: for going right you need to go left, as it works inversely SLEW YAW LEFT to my stick rudder LEFT SLEW YAW RIGHT to my stick rudder RIGHT I wanted to fix this earlier, but the Gaming Services update has messed up FS: at every start, I, and other users, need to redo the settings. Read this posts for the details: forums.flightsimulator.com/t/starting-fs-please-insert-disc-then-i-restart-fs-asks-for-settings-as-in-first-install/368981 forums.flightsimulator.com/t/ui-broken-and-reset-user-settings/368832 By the time I reported in forum + investigated: 3 hours wasted!

[@Huddison]

@@raymondgoubet Brilliant! I hadn't thought of assigning the slew mode to the Joystick axis. Shame about your wasted hours though :(

[@raymondgoubet]

@@Huddison Yes, I wish I had thought before. Do you have that problem when starting FS?

[@chrisharveyjazz]

Hello thank you so much for your tips so far im a new comer from Fsx can you tell me 2 things i love to fly using AI CO PILOT to fly me around as i love to be in the cabin and im not to good at flying just yet but the AI CO PILOT is now playing up since the new update my a20 comes down short of the runway and crashes into buildings it over speeds flies else where and now a trip from Cardif to Dublin half way nose dives into the sea not only that but whats happen to ATC FSX ATC use to tell you fly heading climb and maintain turn left or right heading but MFS 2020 has none of this can you please help thank you sir Chris

[@Huddison]

Hi Chris and welcome to MSFS 2020. I can't help you much with the A320 I'm afraid, as I haven't flown it much in this sim, as yet.

[@chrisharveyjazz]

@@Huddison Hi many thanks its not realy about the planes its the AI CO PILOT IN THE SYM IS PLAYING UP BIG TIME WITH ALL THE AIRCRAFT WHAT DO YOU SUGGEST ABOUT THE AI CO PILOT IM SURE OTHER PEOPLE ARE HAVING THE SAME PROBLEM

[@Huddison]

@@chrisharveyjazz I never use the Ai Co Pilot, so can't help you there.

[@hsuperbird9504]

Well done. Thank you Sir.

[@Huddison]

My pleasure.

[@TheLifetraveler1]

Thank you. I got it setup the way you instructed. Just one problem, once I release the hat switch, the view snaps back to looking at the plane from behind. With FSX when I release the hat switch the view of the plane stays in whatever viewpoint I had when I release the switch. So with FSX if I'm looking at the plane from the side and release the hat switch the view stays there, until I touch the hat switch and move the viewpoint elsewhere. Any suggestions? Oh when I use my mouse to do it, the view stay where I put when I release the button.

[@Huddison]

Under General Options/Camera, ensure you have 'Toggle' selected and _not_ 'Hold'.

[@TheLifetraveler1]

@@Huddison Hmm, I checked under camera settings and they were already under 'toggle'. I switched them to 'hold', but it didn't solve the snapping back to a rear view, after releasing the hat switch. So I switched them back to toggle. Any other thoughts, would be appreciated.

[@scottle6566]

FSXer since 2006, missing the "hat" switch look around in the fs2020, that I just acquired a week ago. So can I set this up for internal view too? Thank you!

[@Huddison]

Yes I have a video on that somewhere - check my playlists.

[@jeffhague4916]

Thanks nice to get the hat working like fsx

[@Huddison]

Yeah it makes MSFS feel like home now.

[@MrJDL571]

Thank you for this!

[@Huddison]

Most welcome

[@johnlennon1049]

Excellent job!

[@Huddison]

Thank you very much!

[@peterjohnson350]

Saved me yet again!

[@pintokitkat]

'Click up and left, which is right...' perhaps 'correct' might have been less confusing than 'right'.

[@dabneyoffermein595]

what about in the cockpit, MS2020 is totally funky (jacked-up) by default... I want it like X-plane. Can you link me to someone who did the cockpit settings to make sense like x-plane?

[@Huddison]

Here you go: kzbin.info/www/bejne/rJC1dH2MqK58gJo

[@jcbak]

Thanks. Very useful.

[@Huddison]

You're welcome.

[@stephenmason5682]

Well done, great explanation! !eep doing them?

[@Huddison]

Thanks Stephen, highly appreciated.

[@ariel340]

Using a Logitech joystick, and followed the instructions, and it changes the view, but it doesn't stay in place, once the hatch is released, the view skips back to the rear view. :(

[@Huddison]

You have 'hold' view enabled instead of 'toggle'.

[@Wingsems]

Great work thank you

[@Huddison]

Thank you ;)

[@petersmith4423]

Excellent, thank you.

[@Huddison]

Most welcome.

[@Khakans]

Thank you very much!

[@Huddison]

You're welcome!

[@manoxyde]

Very useful, Thx

[@ZenonZolek]

Good job thank you

[@Huddison]

Thanks

[@nal2us2]

I have MS Flight Simulator X and whenever I go to External View all I see is a propeller, not the entire Airplane. Please help!!! What do I do to fix?

[@Huddison]

It's difficult to tell what is going on there - come and join the Discord: discord.gg/3kra6JfHZT and we can help work you through it.

[@nal2us2]

@@Huddison Thank you. I figured it out. I had the Detail set too high in the application for the Graphics card to process. Thank you for your response and have a blessed rest of your evening my Friend!!!

[@Huddison]

@@nal2us2 Great to hear ;)

[@ready4fitness1]

Thank you!

[@tgmjrtgmjr8221]

How do you set a Hotas button to toggle to external view? It just seems buggy to me. I want to push a button and get inside and outside quickly. External toggle does not work for me.

[@Huddison]

From memory, I set my 'Prev' button to toggle cockpit/external views. I was able to scan for input with that, with no issues - clear anything that's set to the button, if necessary.

[@nwpilot1218]

This should be titled "Microsoft: Please stop messing with what were formerly perfect flight control sensitivities and camera settings and hot keys" They tried to fix something that wasn't broken lol RIP

[@Νικόλαος-ο5δ]

Do you know is the same procedure at the prepare 3d simulator?

[@Huddison]

It's not a sim I own unfortunately.

[@ellonysman]

On Xbox S I tried but after validating the change the whole box dissapears. Now I dont know what to do

[@Huddison]

Which box?

[@mrturismo]

Great info, but you don´t really need to say "left click" for every command you make. It´s assumed people know how to use a computer if they reached your content.

[@Huddison]

Thanks for you comment; I consider it constructive and will take it onboard. There are a variant demographical number of users with MSFS 2020: some may have intermediate experience with computers; others may be relative newbies - I am just 'covering all bases' in my approach to my videos, without (hopefully) coming across being overly patronising :)

[@mrturismo]

Its absolutely constructive. It gets repetitive. Keep up with the content.

[@howardmoscovitz9353]

No no no your’re wrong. Huddison’s teaching method is very helpful. Too many you tubers wave the mouse around and say set this or that and it’s impossible to follow. Here there is no doubt what to do and repetition is very helpful. This is the first Huddison video I’ve found and I just subscribed. Huddison, keep it up. Thank you.

[@mrturismo]

@@howardmoscovitz9353 Ok then.

[@Huddison]

@@howardmoscovitz9353 most appreciated, thanks😊

[@easternhops]

Is there any way to slow down the hat switch speed?

[@Huddison]

Yes go to camera views (menu at the top) and turn down the sliders.

[@bertobones7182]

🌟🌟🌟🌟🌟

[@yair1956]

Fsx used to detect the Hatswitch and automatically assign all command .... you didn't have to go through this tedious process

[@Huddison]

Yes, those were the days.

[@yair1956]

@@Huddison which I don't miss ..... lol

[@helicopterovirtual-msfs6254]

Show 👏

[@williammccann9372]

D

[@MaryK4242]

Brilliant! Thank you very much.

[@Huddison]

Most welcome

[@alanw.4511]

Thank you!!!

[@Huddison]

You're welcome!