Fuel Sender & Digital Gauge installation on Boat

AMAZON LINKS TO PRODUCTS FEATURED IN THIS VIDEO:
USA
FUEL SENDER AND ANALOGUE GAUGE KIT: amzn.to/31kigvc
SENDER ONLY : amzn.to/3eG2sqx
DIGITAL FUEL GAUGE : amzn.to/2ZdyYKe
AUSTRALIA
FUEL SENDER : amzn.to/3iuPbn9
DIGITAL FUEL GAUGE : amzn.to/3dX2Ks5
Also Join me on:
Facebook: / fishingadventureshawke...
Twitter: @fishingAdventu6
If you are in New Zealand please support my business:
Best Baits in New Zealand: / lastcastnz
Contact Me:
Email: [e-mail]
Send me a Message on Facebook:
/ fishingadventureshawke...
Send Me Some Mail:
Contact me and I will Gladly give you my mailing address

[@FishingAdventuresHB]

With so many people passing through. It Would be pretty cool to know where y’all from let me know down here.

[@allenlivingston]

Nice explanation from India

[@_Jesse_]

Greetings from the Netherlands :)

[@andrewmekan9817]

USA Denver Colorado

[@matthewdoucet1555]

Louisiana USA

[@cheapirishbastard]

USA Alabama

[@Jonosdad]

that was terrific. I didn't even know where to start before watching your video. Now I feel I can move ahead with this project. I also liked that you set it up before the install - very smart! I'm in Long Beach, California. and have a Catalina 30 sailboat.

[@TheFrenchChef]

Thanks mate -That will help me a lot to install my fuel gauge and go fishing with no worries. and cooking my catch. Cheers.

[@juliantapia5389]

This is a great tutorial i really apreciated i work on boats and idk how to install the gauge

[@eddiemoore7453]

Thanks for the directions it works great now!

[@cookiecanfly_]

awesome video mate. How’d you go drilling the hole into the tank? Did you have to pressure rise the tank so nothing fell in?

[@salimsopari]

thank you for making this video! greetings from canada

[@impartialinterest]

Thanks for the vid. Why did you cut the arm 6 inches? I get the shaft measurements, i.e. tank depth / 2 + 1 inch. but where does the are length dimension come from? From Auckland NZ

[@zasti78]

Thanks very informative, I did a same work yesteday. I'm working on a cruiser(1972 lindqvist 21) to bring it back to life.

[@FishingAdventuresHB]

No worries glad someone found this useful. cant wait to see how that turns out. Please keep me posted. I restored a few motorcycles myself in the past and have a big passion for riding. No better feeling than showing off your hard work and seeing peoples reactions. Good luck with that.....

[@1967bigfrank]

@@FishingAdventuresHB a 1972 lindqvist 21 is a boat mate not a bike .Nice informative video , I'm about to put some fuel gauges on my boat (one for each tank) Thanks for putting this up

[@FishingAdventuresHB]

1967bigfrank lol our right mate. He said Cruiser and I thought bike. I only realise that now. Must have misunderstood him. Lmao. Thanks for watching.

[@johnengland8619]

Thanks for the content

[@KING-pb6dd]

Greetings from Saudi Arabia

[@babinkkcalicut4574]

Good work... how can I get all these things.

[@FishingAdventuresHB]

there are links in the video description to the product.

[@adambillings2785]

What sender kit did you use? Also did you do a video of installing the fuel pipe doing into the tank?

[@FishingAdventuresHB]

Adam Billings it a universal sender kit from veethree electronics & marine and yes I made a video of the pipes to the fuel tank. here is the link : kzbin.info/www/bejne/gWWno4mketZrhJY

[@adambillings2785]

@@FishingAdventuresHB thanks mate, really enjoying your videos too

[@majestictwelve6758]

Stupid question.... Is it safe for the fuel (petrol) to be touching the cables that are connected to the sender inside the tank? Doesn't seem right?

[@frankdavidson9675]

you are wrong the wire s are not in side tank

[@KING-pb6dd]

Very beautiful

[@almarnordby2034]

Ty

[@les121476]

Great job, thank you

[@CROSSY8877]

Sweet az bro its choice, would you have a bucket and hose bro I need to get wet asap

[@darrinbunston5932]

What do you do if there's only one terminal on the tank unlike yours that has two

[@FishingAdventuresHB]

That’s a bit odd as there should always be 2 connections. And always run negative through the sender never ever have any positive wire come close to it as any sort of spark would obviously be really bad near fuel. My only guess would be that the negative wire from your battery would be going to the only terminal on the sender and the negative to your gauge would then be connected to the metal top part. Perhaps by connecting it to the bolts that holds the sender in place on the tank. Test this away from the tank 1st and please let me know if that worked as I’d be very interested to know.

[@darrinbunston5932]

@@FishingAdventuresHB It's a brand new tank a fuel cell But haven't bought a fuel gauge yet Not sure what to buy

[@FishingAdventuresHB]

All gauges should work if I can recommend buy the analogue type rather than the digital type I have. When the boat is on the water and going up and down there is so much movement on the digital one that makes it confusing on how much fuel is actually in the tank.

[@FishingAdventuresHB]

Also if you own a multi meter you can put it on the ohm function and then put one prong on the senders terminal and the other one to the housing and then you should see the reading change when you move the float up and down.

[@NeverEnoughPyro40]

Those wiring instructions are not correct! I have a fuel sending unit with only one threaded stud in the middle! You should run a pink wire from your sending unit to your gauge marked sender! Install a ring terminal on a black ground wire and attach it to one of the sending unit mounting bolts, And the other end goes to the ground of the gauge! Run a red wire from the gauge terminal marked ignition, And the other end to switched power on your ignition switch! Very simple! Always use red for power black for ground and pink for sending units! Oh and if your fuel tank is metal do not forget to run a separate ground wire from the tank to your fuel filler neck! These instructions came directly from my Tempo Marine Electric sending unit instructions! Also they recommend using 14 or 16 gauge wire for this!

[@lalo3045]

can you plz tell me the name of the song i really appreciate it...

[@FishingAdventuresHB]

Hi Ialo. It’s from No Copyright sounds. NCS. Song is called Fade by Alan Walker. Here is the link to that video. Thanks for watching. kzbin.info/www/bejne/mH6ahI1riKetr7s

[@rajusungat3656]

241 ट्रेक्टर का डीजल मीटर खराब हो जाये तो केसे तैयार करे model 2015

[@sunilketoliya8763]

tata indigo 2009 ka fuil kata kese kam karga

[@dmdfishin]

Nice

[@Ronix24Wake]

choice bru

[@sunilketoliya8763]

tata indigo 2009 ka fuil kata kese kam karga