Full Access UTV Kawasaki KRX 1000 Review & Release

[@shannonstiles8751]

The rear bumper for sure & all the suspension upgrades 🇺🇸

[@waltere.mellin3537]

I love the rear bumper setup with the cooler, that's awesome. So many clever and well thought designs. Looking forward to see what else you come up with

[@amsoilron]

I like the rear bumper/bed extender/cooler holder. I'd definitely put one of those on my list.

[@jemadv1594]

Love the wing window vents. Works as mud deflector also

[@BigTiny-pv5he]

Wing vents are cool also. I’d buy a set. I’ve got the front shock braces setting here. Just haven’t been able to install yet.

[@OffCamberInd]

Solid build. I like that rear bumper/bed extender

[@leeman20s98]

Why not sell the rear bumper? I really want one for a cooler so the tire can stay in the bed area

[@WVHotRodRhino]

love the side vents!!! I wanna set.

[@moparman33952]

Love the wing vents on the pillars I so need a set

[@beardedaviator3880]

Make the rear bumper, that's perfect especially with the cooler!!

[@marvinevans8789]

The side wings are a great looking piece. I would really consider purchasing for my RZR. 👍👍😎

[@GT4JB]

Fantastic video! Finally have a guy who does not read the spec sheet and has real experience with KRX. Diggin your cool upgrades. thx

[@AJHoover]

Was great meeting and talking with you! I need to place a large order, I dig you setup and products!! I'll probably be at koh again next year and takeover utah in october

[@joshuaross535]

Y’all need to sell all of this. This car is perfect.

[@fullaccessutv]

Thank you! Working on it.

[@gregjones2217]

I had to watch again. What a sweet ride. We'll be talking in the spring when the new one gets here

[@fullaccessutv]

Thanks

[@1978JWJ]

Yes, please do a cab seal video.

[@chucklafore5421]

Checked out the website. Great products with awesome prices. It would be cheap to bulletproof this rig. This made me lock in on the rig I want. Thanks and can’t wait to order. PS build the wing vent side mount windows!

[@coltermohney7038]

Great video. I liked the looks of your wing windows and I am interested. I purchased the Kawasaki cab seal kit and you are correct it made a big difference. However like you said there are numerous places that they missed. I made my own pieces out of neoprene to fill in some of those areas were they missed. What I added made a big difference as well however there are still areas I have missed so I am definitely interested in what you have found and where you have found the dirt coming in. I really like your rock sliders too I just purchase some Kawasaki ones and I am not fully comfortable with them. I have some concerns about functionality and life on them. Anyways you guys have done some pretty spectacular work it looks like thank you for the video and the information.

[@brandonhatfield2547]

That is a badass car man! I don't think I would change a thing.

[@fullaccessutv]

Thank you

[@tahawknv4]

Great video Jake! Enjoyed talking with you when I ordered my front shock mounts. Had no idea you were local. We love your products and supporting your company. Let us know about the customer appreciation event. We are riding peavine Saturday the 26th. If you are interested too.

[@fullaccessutv]

Keep me posted on the ride. I may fit that in.

[@lorionlylori1580]

That’s AWESOME!!!!! Mini Jeep!!! 💪🏻💥🙌🏻

[@fullaccessutv]

but smoother and not a JEEP. LOL

[@tomr8276]

Great video! +whatever on the wing vents--good idea.

[@jamiebeepbeep3668]

Absolutely need this bumpers and sliders, will be seeing you guys at utv takeover with my krx turbo

[@fullaccessutv]

Sounds great. Can’t wait to see it.

[@BigTiny-pv5he]

Like the video and love jbs. Dave is the man. Going to try and get my clutch mod and anything else he suggest this week.

[@richr909]

I love the idea of the windshield side air deflectors I'm in my late 40's and the less air/dirt/mud/bugs hitting me in the face on the trail, the better. The only thing that I would change on those if I were you would be the gap between the edge of the deflector and the roll cage A pillar. Instead of it having what appears to be around an inch and a half gap, I would make it around an 1/8" or 1/4" gap if possible to really seal off that air coming into the cab. And maybe even make it adjustable to slide out a little farther for even more air deflection too.

[@johngeary8534]

I just ordered a 2023, will be here end of September. Best stock suspension on any model!!

[@adamharris2674]

So how on Earth did you order one of these? 5 dealerships around my area all said "we can't order KRXs, they just show up on the truck whenever they show up."

[@johngeary8534]

@@adamharris2674 Depending on where you live I guess, I got mine last September, I live in Reno NV

[@Rhyno888]

That back bumper cage is so sick! I’d buy if you make it. Been looking for a good solution to mount a cooler.

[@damienstark6901]

I’d buy wing windows for sure

[@christianxzowner2958]

Looks mean ...looks and colors...💪😎👍

[@christianxzowner2958]

Good life to your business Buddy...this is really awesome to think you can add and dress up so it looks killer ..just wow man...!!!😎👍💓💓💓

[@MatthewFeageans]

Please make the rear bumper cooler mount love that I have the same problem getting to the cooler wife hates trying to get anything out

[@fullaccessutv]

Working on it but we are probably still a little ways out

[@tomrineair944]

I'm interested in rear bumper also, been looking for this so we can carry cooler and tools needed for us@@fullaccessutv

[@fullaccessutv]

working on it @@tomrineair944

[@Watts85af]

I really really want a set of wing windows. Please make them

[@christianxzowner2958]

Looks cool like an X3 with the rear arch

[@bretstephensen8821]

After watching this video I completely understand why you would want to install the upper shock and both upper and lower control arm braces. It's a no brainer period! I just bought them from eBay for my new KRX that I have coming along with your shock spring adjusting tool. I think that I am going to also add 1/4-28 Zerk fittings to the front control arms in order grease the control arm bushings. As far as I am concerned these items should be added first thing on any KRX.

[@fullaccessutv]

You are correct. And thank you for the order. That’s another modification I would like to do to my arms as well

[@bretstephensen8821]

F.Y.I I just picked up my new 2021 KRX 1000 eS and I am installing the top shock mount reinforcement braces and the bracket on the inside of the mount will not work because Kawasaki has added gussets in that location and they interfere with the inside bracket. I am still going to use the front brace and I will use the thick washers on the inside. I thought that I might give you a heads up on this situation.

[@fullaccessutv]

@@bretstephensen8821 Looks like we’re going to have to do a redesign for the ES. If you could possibly send me some pictures to our website email. Thanks for the heads up.

[@bretstephensen8821]

@@fullaccessutv I have taken pictures and you can't make out any detail regarding the gusset that is in the way. I am able to use the thick washers on the backside of the mount and the gusset starts near the edge of the thick washers. I wonder if Kawasaki has had a problem and is going to start adding this gusset on newer models or if they have started this on all of the KRX 1000 models. I am sure that you will find this out in the near future.

[@christianxzowner2958]

Thoses seats look killer too...

[@wesleylaflin857]

Awesome

[@joemarxen4483]

I'd buy a set of the wing vents. I'll order a few other items as well.

[@bigjim4281]

Here's my want and wish . I would love a set of wing windows . James Laam

[@johngeary8534]

More info on the cooler rack on the rear please

[@RocksNRuts4]

YES def make n sell the little triangle windows, I want em! n Id like to see the other dust proof things u did

[@deltafly4545]

Hey man love your videos ! Is there anyway I could possibly order a rear cooler holder like yours

[@fullaccessutv]

At this time we don’t have any plans on producing them. In this day and age in our government we cannot seem to get employees or materials for almost anything we’re making. Unfortunately tube fabrication is on the back table for now. Sorry bud.

[@deltafly4545]

@@fullaccessutv I totally understand my friend I just hope this get better from here on out !!

[@gentlemanwethepeople1472]

Badass brother ! 🙏👏🇺🇸

[@jeepaholic2000]

Def build the side vents they will sell!

[@bobfisher9452]

I’d like a set of those wind deflectors for my pro xp. Will they work on other cars besides the KRX? Thanks! I would have bought a KRX if they had a 4 seater hope they come out w one.

[@christianxzowner2958]

The front bumper ..do you have that tied inside on the firewall frame...so it become ramsafe if you bump front some one or ram in a tree..? ✌🌞

[@mingomane1]

Those side vents look super nice. The dust in the krx is less than ideal that’s forsure

[@80DeuceAdventures]

Hey man, awesome stuff.... I looked on your site. Your sold out on Roll Cage. If roll to Sparks can I pick one up? I'm really interested as well as your other products. Let me know!!!

[@wyattwhitworth8184]

build that bumper please

[@reymundocastro87]

Is there good concrete the slow appeal rocky but not good for fast desert running

[@fullaccessutv]

Not sure what you mean? Look up shock therapy. Their opinion and mine is it’s the fastest thing in the desert minus the turbo. Suspension geometry is better than anything else on the market.

[@jamesharless5357]

Great video!👍🏻

[@nigelcobalt]

Does the muffler cover really make it quieter? Any other ideas to quite it down? thanks

[@fullaccessutv]

It makes no difference in sound. Just looks. The krx is and quiet as it can be. No muffler will be quieter.

[@gregjones2217]

I'm mostly interested in tuning for low to midrange and higher elevations. I live at 5000 ft and usually ride up. Thanks

[@fullaccessutv]

Greg most of the off-highway vehicles have a limited map sensor to go from one altitude to another. They make compensation but very slowly. Your best bet is to get it running a little fat and that would be with the tuner, fuel filters etc.

[@pantuso6]

You hit the nail on the head about Kawasaki having a edge over everybody else. I have a 2020 4 seater Can am and have added thousands of dollars of add on's that Kawasaki comes with. I ordered a 2021 KRX 1000 that will be here at the end of the month. I really like that rear bumper. Do you think you will ever make it available or was it just a one off?

[@fullaccessutv]

This is the new america, and unfortunately I cannot find employees who want to work, or is worth a d*m. It sucks, but fabrication parts are going to be hit and miss for a while until we can find some good people.

[@pantuso6]

@@fullaccessutv Completely understand.

[@jamesthomas5580]

Your story is completely intriguing about the “why KRX” and how you grew to enjoy it. Can you tell us how much maintenance you have had to do on the factory standard components?

[@fullaccessutv]

Basic maintenance besides the things we have done on these videos. We will do an update on the green Krx soon

[@chrisringle]

Jake, I need that rear bumper. Are you planning on making any to sell?

[@chrisringle]

Maybe figure out a way to get a rear winch mount plate on it as well. There is a need to have that cooler lowered for us height challenged folks. I bought your high clearance hitch just to install a step so I can get to my cooler. I called it the beer-getter-5000. It works well.

[@fullaccessutv]

@@chrisringle lol. Yes we have some plans on doing something but nothing with a winch attachment.

[@jonnynails]

@@fullaccessutv Yeah, +2 on that rear bumper. Perfect idea! I'm between machines at the moment, but once I get a new to me KRX soon that rear bumper is one of my first purchases.

[@randallelectric6405]

Hey Jake awesome set up. interested in the headers at the back. 8 min mark. can you give me any more info. ?? thanks.

[@fullaccessutv]

those are custom air intake and clutch intake to remove the boxes. Lots of work.

[@TheregoesActionSports]

Subscribed. Great stuff. What are the specs of the wheels? 5+2 or is that a 4+3?

[@fullaccessutv]

@@TheregoesActionSports these are 4+4. But usually we use a 4+3 or 5+5

[@TheregoesActionSports]

@ thank you for the feed back.

[@billmielke6372]

what do u think about prp front shock straps

[@fullaccessutv]

We have not used them with our mounts. Customers have but said the bolts were too short with our shock mount braces

[@billmielke6372]

@@fullaccessutv installed no problem with your bolts hope its not added presure on the mount ?

[@bretstephensen8821]

I just ordered one of your muffler covers off of eBay. Without seeing it yet I was wondering what kind of gap there is between the cover and the muffler because if there is enough clearance between the two I would like to use some RTV high temp silicone to adhere strips of exhaust wrap to the inside of the cover and maybe this will help reduce some of the heat saturation from the muffler to the right rear shock.

[@fullaccessutv]

the gap is set per our install directions on the fullaccessutv.com site. Its usually 1/8" on the side, but can be changed if need be. Not sure if this helps?

[@bretstephensen8821]

@@fullaccessutv Great! Thanks. I will check it out.

[@christianxzowner2958]

Small side windows ...cool add to keeps dirt and dusty airflow

[@redneckracing8895]

I'm interested in purchasing a cage how much do they cost

[@donniejohnson8137]

Hey Jake tell me what you think of 35's I am running a krx1000 and i am stock still do i need to tune on it and do i need to change out anything to be able to run 35's

[@fullaccessutv]

No need to tune it unless you want the power back and full power reverse. I highly recommend the Dyno jet tuner. The krx is made for 35” tires and I see no issues with them.

[@noeorozco5054]

which ones better 2021 kawasaki krx or 2021 polaris trail s 1000 premium?

[@fullaccessutv]

IMO that’s not even a comparison. The Kawasaki is a much better machine. Bigger parts, better warranty, smoother ride.

[@realprorealestateprofessionals]

I can't find these Wing Wind Windows on your website. How can I order them?

[@fullaccessutv]

Lots of comments here. They were never produced due to cost

[@realprorealestateprofessionals]

@@fullaccessutv I see the remark below, you think I'm going to go through years more of remarks for what reason. @jemadv1594 1 year ago Love the wing window vents. Works as mud deflector also

[@fullaccessutv]

@@realprorealestateprofessionals agree!!

[@brettc437]

Which KRX model did this start life as?

[@fullaccessutv]

It was a standard model.

[@chasemartin8893]

When you going to sale the role cage?

[@fullaccessutv]

Cages will be in the next couple months. Thanks

[@dondelche]

I’ve got 2 questions about your wrap: 1. For the rear blue stripe, is that another piece of vinyl wrap laid overtop of the green? 2. Do the wraps hold up to dirt and mud and is it safe to use products like sc1 and mudslingers on them? Love the videos!

[@fullaccessutv]

Yes it is vinyl over vinyl. The wraps really don’t like the silicone from those sprays. You actually have to remove every bit of it before you can even install.

[@dondelche]

@@fullaccessutv Appreciate the information . Looking forward to future content!

[@russbacon9265]

I need that rear bumper....lol

[@richardgarcia5850]

What tires are you running

[@fullaccessutv]

35” system3 xcr350

[@tittysprinkles969]

@@fullaccessutv how are these tires, sticky wise compared to a roxxzilla sticky? Softer or Harder compound?

[@fullaccessutv]

@@tittysprinkles969 They are harder. However not much harder. They last longer out on the trails and I had zero issues getting up anything all week there. However you can see the Maxxis are stickier.

[@tittysprinkles969]

@@fullaccessutv would u recommend these for East Tennessee, Kentucky area? There is road riding. I just don't want to buy $1200 worth of tires n have them wore out in 500 miles

[@fullaccessutv]

@@tittysprinkles969 If you are not riding rocks then there are other options that are much harder. Coyote or tensor 35 inch tires are really hard and would last longer. I’ve seen the coyote do some good rocks too. We can set you up on those if you need.

[@carmelogalarza7764]

How much if you make that bumper

[@fullaccessutv]

No plans as of yet. Employees lol.

[@ajkostelansky3665]

Would love to have the cooler in the bed

[@jefferymentzer1240]

Just Throwin it out there: ??? Pull back a scoshe & flow a little more. I can definitely see & feel the passion but a little to confident with your background & not enough confidence at the end??? What the hell do I know but I think if you read my comments & then your video maybe you’ll pickup on my opinions??? Love the car & again just Throwin it out there! I’ve been is sales 40 years just tryin to help because I dig your passion!!!!!!!!! #44

[@earlpreston1043]

Check the forums and see how many transmission failures there are! My 2021 KRX lasted 300 miles and has been down waiting for parts since March! They are junk!

[@fullaccessutv]

I would completely disagree. I do see the forums and Facebook. There are a few issues out there as with any machine however it is not a design flaw from Kawasaki. They have some lemons but it’s a very built transmission. As far as downtime, I understand that and every manufacturer is dealing with it. Be lucky we don’t own a Polaris. My friend has been waiting seven months for a new replacement motor in his turbo S. All under warranty 412 miles.

[@redneckracing8895]

I just bought the same machine the clutch systems are garbage it's an nice machine but the clutch systems are garbage I'm sorry I really bought this machine it was a waste of $18,000

[@ericfaber7419]

Too bad they aren't 18k.