Full Ambi, Full Featured: Daniel Defense DD4 RIII | Guns & Gear

Guns & Gear’s Ryan Gresham and Daniel Defense’s Daniel McElroy showcase the DD4 RIII rifle. Built with the design features and quality manufacturing that Daniel Defense is known for, the DD4 RIII also offers fully ambidextrous controls. Also, join Guns & Gear’s Chris Cerino and Daniel at the range for an accuracy demo.
Guns & Gear Season 14 is proudly supported by Black Hills Ammunition, Caldwell Shooting Supplies, Colt, Crimson Trace, Daniel Defense, DoubleTap, EOTech, Faxon Firearms, Franklin Armory, Holosun, Lockdown, Norma, POF USA, Ruger, Sig Sauer, Silencer Central, Smith & Wesson, Springfield Armory, SureFire LLC, Timney Triggers, and Wheeler.
Catch Guns & Gear on the Sportsman Channel from July to December 2022 on Wednesdays at 2:00 PM Eastern, Thursdays at 8:30 PM and 11:30 PM ET, Fridays at 2:30 PM ET, and Mondays at 5:00 AM ET. Guns & Gear is also online at www.guntalktv.com, on Gun Talk's Roku, Amazon Fire TV, Apple TV, and Android TV channel, the Gun Talk iOS app, the Gun Talk Android app, via Chromecast, or find Gun Talk on KZbin and Facebook.
Copyright ©2022 Freefire Media, LLC

[@aquatixofficial7868]

Finally a damn video on the RIII

[@Fittednocap]

Damn this video is 4 weeks old?! Looks like its from 2003 😂

[@Dan-di9jd]

Hint: they spent their budget on the rifle and ammo.

[@SkilledCivilian-]

Full controls are not available in California on the dd4 m4a1 rlll

[@BerryMcCaulkiner300]

Nice shootin, Tex!

[@justincooper5053]

How far can the M4A1 Riii shoot? It’s a 14.5” barrel.

[@Dan-di9jd]

With a 14.5 inch barrel, it can shoot 14.5". Pretty crazy.

[@KennyRodgers930]

When’s the 11.5 going to be available??

[@timyang4710]

yah i'm wondering the same also. I want an 11.5 RIS lll

[@m4a1JAY]

It’s already available you can find the SBR on gunbroker for $2200. You need another $200 for the tax stamp. The rails won’t be available until 2023.

[@23RO]

Until DD sells the lower receiver seperately, LMT still has the market on lock down.

[@dragoneye6642]

Not even close

[@JohnSmith-du3cy]

Lol LMT lower is a grand, Lwrc is just as good and can be had for $500-600 including tax n shipping plus ffl fee.

[@alexmiller5796]

@@JohnSmith-du3cy I have an LWRC rifle and man the lower is amazing. I added a Magpul extended magazine release so I can hit the mag release and paddle with one finger

[@brandoncass8810]

Im left handed, so how will it benefit me?

[@miles267]

Me too. It won’t. At least until it ejects to the left side. Disappointing.

[@olvera6710]

The lower will benefit you but of course extradition won’t benefit you.

[@Dawn_Raider]

Can I get a 16in with the black handguard?

[@jonmobley8197]

Just get the DDM4V. Same handguard in several colors and the rail is a full 15 inches

[@Dawn_Raider]

@@jonmobley8197 I was going to buy a V9 until I saw this

[@jonmobley8197]

@@Dawn_Raider I've got a V9. It's not my favorite, but wanted to get a full quad rail before they're a thing of the past. I like the M4A1 with the new RIII rail

[@corbinstephens8562]

What optic?

[@_Bandido1911]

Is this one better than the v7 Pro?? Anyone know.

[@devon5078]

yes

[@_Bandido1911]

@@devon5078 how?

[@BerryMcCaulkiner300]

The weight of the 18” barrel is a beast. I’ve owned mine for about 5 years now and G.D. is she heavy, but G.D. is she accurate and buttery smooth.

[@KaneGregory]

BCM your move!🧠🤯🔫

[@666-y8w]

LMT or LWRC A5 for me.

[@andrewjuriansz2056]

Both are great brands, I would go with the LWRC if it wasn't for their proprietary rails.

[@olvera6710]

@@andrewjuriansz2056 how often are your Channing the radio though

[@matthewf9909]

need make the rail longer on the 14.5 and 16 inch

[@gedeondumesyeux2259]

Yes I want it to look like the mk18 with a suppressor

[@Perry2186]

It's not full ambi ar until it ejects out both sides

[@InvictusEnigma]

Or ejecting underneath

[@olvera6710]

No the lower receiver is ambi not the upper.

[@flubdreload2818]

It’s honestly dumb to care enough about that considering there’s a brass deflector…

[@Perry2186]

@@flubdreload2818 right handed people always say this but won't touch a left handed rifle

[@olvera6710]

@@Perry2186 I agree there would be no point for a right handed user to use a left handed rifle. Even with the brass reflector as the other guy stated above doesn’t stop the gas and crud from hitting you in the face and I’m a right handed user. You can tell most of these guys don’t have lots of shooting experience because they must not switch shoot very often.

[@ElStriker777]

The Best Cream of the Crop 🔥👍💯💪🏻

[@11superstar1997]

The fact that he cleared the chamber like a regular AR-15 blows my mind 😂 He didn't even use the ambi control once. Amazing rifle but piss poor review lol (Hence the Paid Video)

[@lewisfam4274]

False - watch again

[@11superstar1997]

@@lewisfam4274 Timestamp it

[@Antykain]

@@11superstar1997 2:23 :)

[@11superstar1997]

@@Antykain False. He uses mag release (dominant side), Bolt Catch, clears the chamber, feeds the mag, slides bolt and done. Not once did he use the support side mag release.

[@Antykain]

@@11superstar1997 He used the ambi-bolt catch. The bolt catch on the right side of the lower is the ambi-bolt catch/release control. As there is no bolt catch/release on the right hand side on a standard lower.. I think you're a little confused my friend. :)

[@markmiela3937]

DD is a day late and a dollar short. They create an ambi lower(long after others have) and raised the prices.

[@olvera6710]

Their carbine cost less than an Lmt with all in house components. The only other ambi lower that is cheaper and is worth a crap is the lwrc. You can find the ris iii online for $1799 i don’t own a Daniel but that seems like a pretty good deal.

[@Rubeless]

Your example was useless. You still used both hands and it saved no time.

[@practicepractice5719]

Sorry, but this guy needs to learn more about malfunctions. That is not how you clear a failure-to-eject. (It’s how you clear a double-feed). Sure, you can do it that way but it is completely unnecessary and time consuming. Seeing that gives me little confidence in his expertise in the industry….. Disagree???? Search and learn on KZbin about what am am saying….don’t take my word for it, see for yourself. Great rifle though.

[@AMx39]

I’ve felt a 14.5 ris 3 at my local shop. The handguard is good, rest of the gun is shit. Shity trigger, shity charging handle shit saftey. All of those things should of been improved on especially for what the demand in terms of mula. I’m team ADM all day, this is straight shilling

[@chrisdonahue524]

I see all those disgusting cerakotes they offer the rifles in. yeah, ADM all day /s

[@gardnerrosseto]

Completely agree, I also went to my local gun store to check out a m4a1 and was disappointed with the crapy trigger and charging handle, so I also ended up buying an adm uic mod 2.

[@AMx39]

@@gardnerrosseto hell yeah man. Did you go with a 13.9 capt’n quint too? They are amazing rifles and their customer service is super solid man. I’ll be getting a 16” for and “spr” build hopefully soon.

[@gardnerrosseto]

No, I got the 14.5

[@AMx39]

@@gardnerrosseto still awesome.

[@dragoneye6642]

Lol what crap $2,324.00 plus tax and shipping for the DD4RIII 😂😂😂when you can get a far Superior rifle from adcor defense .

[@JohnSmith-du3cy]

There's sales on these, just like on any other rifle. I think I saw some for $1,850 plus tax and shipping.

[@bravo6959]

Who?

[@chrisdonahue524]

Go be broke somewhere else OP