Full Duplex Monitoring on Flex 6000 Series

[@flatlander523]

Ken - Great tutorial! I now understand how to get the FDX to help me setup my audio. I hope you have time to do some more. Wonderful job. W0KRD Ken Davis

[@jeffreykerber7017]

Can't wait to use this to adjust my audio with my Maestro, thanks Ken. Jeff N3VE

[@johnnyw66]

Thank you, Ken. More! More! More!

[@nm9p]

UPDATE: Since update V.1.6.0, the Mic Profile was separated from the Transmit Profile. So when the video says to save to your Transmit Profile, you will now save it in a Mic Profile. This is actually a good change for SSDR, because it allows changes in other transmit parameters without needing to save additional Mic profiles. For example I have three Transmit Profiles that allow me to select Output Power of 100, 5, or 1 Watt, just for fun. Others will have a separate transmit profile for running with their amp which controls timing of the external switching ports. These parameters have nothing to do with Mic audio profiles.

[@logger90]

Fantastic Flex Radio Systems !

[@richardwright1819]

Thanks Ken, great instructional video, just ordered my 6400 last week and trying to get a heads up on operating tips. i hope i can get mine set up like you instructed to set my audio, sometimes i dont hear what i need to hear, so much to set up since i do some psk and use the dx labs suite. thanks again for the great video! AB4RW

[@paulct]

Ken, this so helpful. I am grateful for people like you that take the time to do these videos. I still consider myself new to the Flex, even after a year. Could you clarify how to do the audacity record? I'm guessing you send the receive audio out a DAX channel, and set Audacity to record from that? Still a little vague on DAX stuff. thanks again. WB2JVB

[@stefanodepra8445]

Fantastic, thanks IZ2WTZ Stefano

[@daviddecoons1417]

Very nice video Ken!

[@somarmd]

Excellent, thank you.

[@garnetdrakiotes8389]

Off topic... what are the spikes shown at 28.350, 28,380 and 28.440?

[@madras100]

ken, Great job. I understand too how adjustments my audio. Tell me just how keep the profil of my micro because I have always "default, pr781..." but in my shack I have an NT2A and NT200 with other caracteristics. Thanks

[@briandenley]

Nice video - thanks!

[@briandenley]

KB1VBF by the way

[@runway929]

Ken, what are the settings for audacity for the flex 6000, or where are they?

[@flatlander523]

Ken - What do you do when you mute your recording microphone? Is that on you PC program you are using to record this video?

[@_devjatov_]

make 100 watts. I'm interested in seeing the signal image ))))

[@JayN4GO]

How accurate is the monitor for listening? Have you compared to the sub rxer? Was also looking at the 5000a

[@jroosh]

Very helpful thank you. NG0Z