Full Guide To Install VLAND Tail Lights

[@dinoxtech]

Great video, really like the new ones, keep going

[@rga7482]

REALLY NICE 👌

[@Nebulametal]

Full Guide to Install VLAND Tail Lights If you're looking to upgrade your vehicle's style and visibility, installing VLAND tail lights is a fantastic option. This guide will walk you through the steps to install VLAND tail lights seamlessly. Let’s dive in! Tools and Materials Needed: Tools: Flathead screwdriver Phillips screwdriver Socket set Trim removal tool (optional) Ratchet and extension (if necessary) Materials: VLAND tail lights specific to your vehicle Wiring harness (if not included) Electrical tape (if necessary) Zip ties (for cable management) Step-by-Step Installation: Step 1: Preparation Safety First: Ensure your vehicle is parked on a flat surface and the ignition is off. Disconnect the negative battery terminal to prevent any electrical mishaps. Gather Tools: Have all tools and materials ready to avoid interruptions during the installation. Step 2: Remove Stock Tail Lights Access the Tail Light Area: Open the trunk or tailgate to access the tail light assembly. Remove the Tail Light Assembly: Locate the screws or retainers securing the tail light. Use your screwdriver to remove them. Carefully pull the tail light assembly out of its position. You may need to wiggle it gently to free it from the clips. Step 3: Disconnect Wiring Harness Once the tail light is free, locate the wiring harness at the back. Disconnect the harness by pressing the tab and pulling it away gently. Step 4: Prepare VLAND Tail Lights Inspect New Lights: Before installation, inspect your VLAND tail lights to ensure they are undamaged and all connections are intact. Connect Wiring: If your VLAND lights come with a wiring harness, connect it according to the manufacturer’s instructions. Make sure each wire is securely attached. Step 5: Install VLAND Tail Lights Position the New Tail Light: Align the VLAND tail light with the mounting location. Secure it in Place: Insert the tail light into position, making sure it fits snugly. Replace screws or retainers to secure the tail light assembly. Step 6: Connect Wiring Harness Plug in the new tail light’s wiring harness. Ensure it clicks into place for a secure connection. If needed, use electrical tape to wrap any exposed connections. Step 7: Test the New Tail Lights Reconnect the Battery: Reattach the negative battery terminal. Test the Lights: Turn on your vehicle and check all functions of the new tail lights: running lights, brake lights, turn signals, and reverse lights. Make sure everything is working correctly. Step 8: Final Adjustments If the tail lights have adjustable features (like brightness or alignment), make the necessary adjustments according to your preferences. Step 9: Clean Up Secure any loose wiring with zip ties and tidy up the workspace. Dispose of or store the old tail lights and any debris you generated during the installation. Additional Tips: Read Instructions: Always refer to the specific manual that comes with your VLAND tail lights, as some models may vary in installation requirements. Seek Help if Needed: If you feel unsure about any step, consult a professional or refer to online tutorials for visual guidance. By following these steps, you will have successfully installed your new VLAND tail lights, giving your vehicle a fresh look while enhancing safety on the road. Enjoy your revamped ride!

[@GolfVIGTI]

Normally there are screws in the bootcover 😂

[@yt_brandonemBEM]

@@GolfVIGTI das auto 🫠😂😂