Full Install and Setup of the Aqara u100 Smart Lock

Рет қаралды 33,286

Күн бұрын

Пікірлер: 38

@openEyeSignal 11 ай бұрын

very thorough walkthrough! especially appreciated 13:00 when you discuss how the tiny screws dont feel like they catch until the very end

@sebastienmartel9 3 ай бұрын

Great video. I can't bind my M2 hub with the smart lock, but the M2 is bind with my other Aqara device. And I can bind the part lock to HomeKit. Any hint what is the problem. The hub is at 5 feet away from the lock. thanks in advance

@TechYourLife1 3 ай бұрын

No that's a weird one. Sorry! I'd talk direct with Aqara on it

@demon__adrian393 2 ай бұрын

Thankyou for cutting the camera at the only moment that mattered to me. Seeing you enter the code. I enter the code, and it does nothing then times out.

@TechYourLife1 2 ай бұрын

Code for what? Homekit?

@TejasBhatt-x6k Ай бұрын

I am also not getting light on keypad while set up

@TejasBhatt-x6k Ай бұрын

@@TechYourLife1while set up..we will get code that we have to enter in door keypad...but i am not seeing any light on keypad...not able to click

@mattkovacs2820 7 күн бұрын

I am having the same problem here, any luck getting around this?

@enhompe2 Жыл бұрын

My neighbor watches our house when we're gone, but I'd like his pin code to work only when we're away. (He has a nasty habit of barging in unannounced, especially when my wife is home alone.) Is this an option here? Thank you

@TechYourLife1 Жыл бұрын

Yeah, it's something you could turn on and off. I think you'd have to delete the pin code though, so it's not an automated use case

@DownloaderVideo 4 ай бұрын

Get another neighbour or you’re in for a surprise. 😂

@crooxys 5 ай бұрын

At 7:08 - Why couldn't you just move the lock body up or down to accommodate the deadbolt after the door jam hole was corrected for the size of the deadbolt? As you had at least 20mm of room to play with either way, by the looks of it.. just curious.

@TechYourLife1 4 ай бұрын

Wrong type of hole. Square hole, round peg...or something like that

@forumvej16 6 ай бұрын

What is the distance between the mounting holes in the aqara u100 lock

@TechYourLife1 6 ай бұрын

I have no idea what you're asking unfortunately. You'll have to ask Aqara support

@joeveasey8522 5 ай бұрын

Thanks for the video! It looks like if I try doing any Alexa automations, I'm limited to only locking it. Even with the settings to allow Alexa to unlock it. Any suggestions? Am I missing something?

@EsotericArctos Жыл бұрын

I find making sure the lock works fully smoothly before removing the old lock is the best way to do this. These do get out of alignment over time as houses/buildings move a bit over time, so especially older buildings end up with locks out of alignment. Many of us compensate by pushing on a door to get it to lock properly. It is more common than you'd think when retrofitting. I have two August locks (because they were the cleanest retrofit while keeping it looking original on the outside (building corporation rubbish)) and both of the locks needed some alignment work to get them to work smoothly before swapping to the smart locks. Calibration is mostly used to determine which way is locked, as depending what side the lock is on, locked and unlocked could be opposite :)

@TechYourLife1 Жыл бұрын

This is a really great point. Thank you Brendan! I'll work that into future tutorials!

@montasarguedouar Жыл бұрын

@@TechYourLife1please i wnat to contact you

@aniketmi1 Жыл бұрын

Hey there, I have a door With approximately a hole diameter of 2.5 inches and the same goes for the backset. Will this be a problem? Should not imo

@TechYourLife1 Жыл бұрын

The guide is right in this video. Just pause at the right spot

@andreasnatanael 5 ай бұрын

Can i turn off the NFC function and only use the Apple Home Kit Key?

@tsizzle 10 ай бұрын

Do you need wifi to setup the lock or can you just do it via Bluetooth?

@TechYourLife1 10 ай бұрын

It's Bluetooth and ZigBee, so no WiFi. If I remember correctly

@AniketMitra-h3e Жыл бұрын

will this work with a backset of 2.5 inches and a hole diameter of 2.5 inches. Those are the approximate measurements of my front door

@sympsonbr 9 ай бұрын

Hello! Great video! If you have  TV (hardware, box), don’t you need its proprietary hub (optional)?

@BrandonDoyleMN Жыл бұрын

I like your door setup!

@TechYourLife1 Жыл бұрын

Why thank you sir! A good local guy made it for me :)

@ChipBeforePC Жыл бұрын

Brian my compliments to you on this video specifically you seem to be the only one that took the time to note (indirectly) that Aqara's app actually walks one through the physical installation of the lock (something I haven't see else where)! Thus pretty much making it brain dead to install!!

@TechYourLife1 Жыл бұрын

😃👍 just happy to help folks!

@tejedi84 5 ай бұрын

I bought this from a guy and I'm trying to reset this thing and there doesn't appear to be a way unless I get a password or fingerprint from the original guy but this last guy was the second owner and that's why he sold it to me wtf. Is there a way to hard reset

@TechYourLife1 5 ай бұрын

Ask Aqara's support team. I'm sure there's a full factory reset somewhere

@TechYourLife1 5 ай бұрын

There is a button inside the panel on the inside of the door lock