Great video man! Keep it up. My wife has the mindset that I’m not out being all crazy and getting into trouble and it keeps me occupied. I fly FPV drones and I’m building a tt-02 as we speak. Need more content!!
@JohnBattistini003 жыл бұрын
Oh FPV drones are awesome. I have one but am terrible at it. Which kit are you building?
@GyuHobbyRC3 жыл бұрын
It was nice to be able to refer to the necessary assembly video. Thank you for sharing a great video.👍👍👍 Have a good day. 💪😊💪
@JohnBattistini003 жыл бұрын
Glad you enjoyed it. Thanks.
@DetoursRC3 жыл бұрын
I also put the smaller bearings in the drivetrain. I was like dang this is one sloppy driveshaft.lol
@JohnBattistini003 жыл бұрын
I feel your pain. LOL.
@Andy99653 жыл бұрын
🤣🤣 I did exactly the same thing, drive train was sloppy, and only put one bb in the wheels 😅
@JohnBattistini003 жыл бұрын
OUCH!
@UncleBobsRC3 жыл бұрын
we are all nuts. lol. great video.
@JohnBattistini003 жыл бұрын
Thanks, glad you enjoyed it.
@OtherSide..2 жыл бұрын
You're the man don't ever forget it
@JohnBattistini002 жыл бұрын
LOL.
@dirtyfingersninja2 жыл бұрын
Great content! Keep it up, subbed!
@JohnBattistini002 жыл бұрын
Thanks. We are busy with some projects on the workbench right now, so there should be be content soon!
@jakeraptor1346Ай бұрын
READY TO BUY THE SHOCKS. IS THAT 55MM SET SHOCKS PLEASE
@woogmaster1013 жыл бұрын
I put together the TT-02 subaru and used all the parts in the box no hop ups and 39 min after being RTR I burned up the spur gear
@JohnBattistini003 жыл бұрын
Oh no. That stinks. So far the upgraded one is perfect. Did you replace it yet?
@woogmaster1013 жыл бұрын
No I haven't just did it the other day been messing around with my traxxas slash
@GearWorksRc3 жыл бұрын
I love the car pit stand you have ill be in the market for a new one soon and I'm still gonna be finishing up my sons TT02 soon I just keep going back to figuring out what I'm messing up on im not sure how the caps go on the bottom side of the axle carries been trying to figure that out.
@JohnBattistini003 жыл бұрын
Oh thanks. I think that was one of the 3D printed ones where I found an STL and modified it a bit. Let me know how the caps turn out are they just not fitting?
@GearWorksRc3 жыл бұрын
@@JohnBattistini00 there fitting im just not sure if im putting them on the right way.
@JohnBattistini002 жыл бұрын
Did you ever get them to fit?
@GearWorksRc2 жыл бұрын
I've been busy working i haven't had the time to build any of it yet
@krowe333 жыл бұрын
I noticed in the Tamiya screwdriver vid you said you don't know much about tools, so I will throw ya a bone here. You will thank me later. Get yourself a decent set of flush cut nippers. They range from $20 up to about $60. Anything cheaper, avoid like the Corona virus. MicroMark has a decent one pretty cheap, but there are some really nice ones out there. You can remove sprue parts nice and clean with a nice nipper. Much less hacking with the hobby knife (you're gonna hurt yourself bro). Hope this helps. And thanks for sharing your RC journey ;)
@JohnBattistini003 жыл бұрын
Thanks for the tip!
@marcustimsans78423 жыл бұрын
Hey John great work with this series. Do you know what E-clip size you needed for the damper set?
@JohnBattistini003 жыл бұрын
Sorry i don't remember the exact size I wound up using. I bought this set off amazon and just used trial and error to get the right ones. www.amazon.com/gp/product/B079B9X3KC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
@richmax132 жыл бұрын
Hey John, I also just got the oil diff hop up. Can you tell me which shaft joint or dog bones I'm supposed to use with it ???
@JohnBattistini002 жыл бұрын
I have a list of all the parts I used in the description for each video. Its been a while but I think these are what I used: Yeah Racing G45 (V2) Steel Universal Joint Shaft For Tamiya TT02 (2) www.rcmart.com/yeah-racing-g45-v2-steel-universal-joint-shaft-for-tamiya-tt02-tt02-015-00036581
@Yneos_xyz Жыл бұрын
Im trying to get into RC car building. Is this considered to be a set for starters too?
@JohnBattistini00 Жыл бұрын
This is not a bad kit to start with but there are "easier" ones, it just really depends on your comfort level. But this one has a lot of pathways for upgrades, so from that perspective, its a great "starter" kit.
@ahmadmoneycars92002 жыл бұрын
What Typ of screw driver does yeah racing Parts NEED? : )
@JohnBattistini00 Жыл бұрын
I am not sure, which parts you mean, most of what I bought had the needed screws with the parts.
@rustyachenbach56832 жыл бұрын
Curious what did all the aftermarket parts end up costing?
@JohnBattistini002 жыл бұрын
I don't have a total but def more than the cost of the kit. My wife was not happy. LOL
@rustyachenbach56832 жыл бұрын
@@JohnBattistini00 hahahaha yeah man I said but the baby will love it great videos BTW they were a great help
@dontforget.thetruth93053 жыл бұрын
Where did you get your Battery? And is There any upgrade?
@JohnBattistini003 жыл бұрын
I honestly do not remember. I have had that 2s venom one for years. Sorry.
@DefiantAML3 жыл бұрын
I’ll subscribe if you promise to pronounce Tamiya correctly! (Ta-mee-ya)
@JohnBattistini003 жыл бұрын
Maybe. LOL.
@krowe333 жыл бұрын
It has been pronounced both ways since the 80's. But Tam-ee-ya is the correct pronunciation.