READY TO BUY THE SHOCKS. IS THAT 55MM SET SHOCKS PLEASE
@Fijiwater510Ай бұрын
I think it’s pronounced tameeya
@outoftouch992 ай бұрын
Great vid but that music did my head in
@jalee65872 ай бұрын
Make sure the gears have just a little slop in the mesh. You never want it tight or plastic spur will strip in a matter of a few runs. I have had the stock plastic spur in my tt02b for years and have over 20 packs of 2s lipo runs through it. Never stripped anything. 3900kv 23 pinion with stock plastic spur. Running 34mph gps verified and bashing.
@jalee65872 ай бұрын
As soon as you ran it That pinion and spur mesh sounds way too tight.
@Sullybolton2 ай бұрын
Vroom vroom
@CrazyHaste_g3 ай бұрын
what parts should i buy? i'm ney to this and i want that. Do you have some links or part names? I want to make it a little bit offroad
@parrisjackson71024 ай бұрын
Rookie mistake, it gets better....
@rmb14 ай бұрын
Your music is horrible
@jesseortega85985 ай бұрын
Awesome video. I need to get some more upgrades for mine. I've only added a bearing kit and the aluminum drive shaft so far.
@thiagohinata5 ай бұрын
Congratulations, John. Great job!! You've got another subscriber. I have a question, what was the final amount spent on this project? All the best.
@l33tnobody13376 ай бұрын
Got the same kit but mine doesn't really work sadly. Gotta sit down and find out what the issue is some day
@calvinl57266 ай бұрын
Have you considered getting a chassis cover
@amadeofasolino81516 ай бұрын
Where did you get the graphite chassis?
@amadeofasolino81516 ай бұрын
This is awsome
@user-mi3ns1yx7o6 ай бұрын
bought it, connected it, nothing shows up, waste of money
@1521joe4 ай бұрын
Yeah I think it's for apple phones only, on android its crashes....have you connected via Bluetooth? PRESS the little button on the module, it then shows up on your phone under Bluetooth settings
@user-mi3ns1yx7o4 ай бұрын
@@1521joe I tried it on 3 different iPhones and an android phone. Wrote to Horizon Hobby and they are saying it's a known firmware issue but Spektrum isn't doing anything about it. Yet they keep selling this product. Very upsetting. Decided to try again, it connects without issues, bluetooth icon is blue, but no information shows up on the phone :(
@ericgildelamadrid39136 ай бұрын
I wonder what a sidewinder 4 with a 3s would do
@edmundb90257 ай бұрын
If I am to upgrade the plastic parts of my tt02 chassis, which part am I to upgrade first since I can't afford to buy all the upgrades at once?
@bmoresbeast7 ай бұрын
Dude, you stripped the spur gear before you even got it off the work bench😂😅
@KitThisKatYT7 ай бұрын
The moment that it, started it jumpscared me
@viperman968 ай бұрын
Just like a real subaru. Soon as you upgrade the engine, the gearbox shits itself.
@chicharrone0078 ай бұрын
Why does everyone leave body posts so high? Just curious see it on a lot of TT-02 builds
@madsrcbuggy9 ай бұрын
This was really cool, John! I watched it on the TV first, and then hurried to subscribe on the phone, and now I managed to watch the video again. I didn't find many good videos on this topic so was happy to watch yours, you talked us through this really well! Looks really cool, the body you did, it is similar colour scheme to what I often like to paint. Sadly links to both the body and the conversion kit you used, they are gone by now, but it gives me a good idea how to do this... I haven't even bought an old Nitro buggy yet, but there are plenty on offer for cheap, so if not earlier, then definitely for next summer! Like I said, I subscribed. I will try watch some of your other videos also later. Have a good one!
@mataosUK10 ай бұрын
Great vid 👍
@kchilz32 Жыл бұрын
Any mods? I have an original one from Nikko
@richwrag3308 Жыл бұрын
Your mesh was way to tight even on the bench at the start. The sound and fast slowing of motor was a dead giveaway. The high speed set is fine but buy a 48dp spur and pinion as gearing options will be much wider than the mod6 I think it comes with. I run a 10.5t brushless on mine with 62t 48dp spur and 28t pinion and it runs beautiful. Remember to make sure you enough backlash on the gears for them to rotate freely. But good vid dude and keep em coming
@FenrirFire18 Жыл бұрын
Finally looking to build one of my dream cars, which is the TT-02 with the full aluminum kit. The aluminum kits still around at a good price, thankfully. Then i'll get the stainless-steel screw kit, some good sealed bearings and tires. Haven't thought about electronics yet, but that'll be easy. Probably just go with something beefy and reliable for the added weight.
@SubZ3ro907 Жыл бұрын
Thats a nice looking build. I built a Team Associated DR10. Did alot of suspension upgrades and steering upgrades, tires, and quite a few other things too. went to a 4000kv motor and a 2.5 to 1 gear ratio and was able to pull a 2.83 sec ¼ mile @ 54mph, on a crappy 2s battery. Looking forward to seeing how this car runs. Thanks for the great videos.
@JohnBattistini00 Жыл бұрын
Awesome. This guy is close, just a few more parts to put on.
@cheagle464 Жыл бұрын
Did he mention KV or did I miss it?
@JohnBattistini00 Жыл бұрын
Its in the description, I may not have: EZRun MAX10 Sensorless Brushless ESC/3652SL Motor Combo (4000kV)
@denizhanangay5251 Жыл бұрын
Hello, is anybody suggest about tamiya tt 02 lock diff is better or no and which spur pinion combination is best for rally? Thanks friends
@JohnBattistini00 Жыл бұрын
You can check out my build video and see what I used.
@seanmcd72 Жыл бұрын
Can't wait to see any 959 action!
@JohnBattistini00 Жыл бұрын
Def some planned!
@Holmanrc Жыл бұрын
Good times man, thanks
@lees5631 Жыл бұрын
Good to see you back 👍
@JohnBattistini00 Жыл бұрын
Thanks its good to be back!
@stevenzacharakis Жыл бұрын
How's it going? Been a while?
@GUE891 Жыл бұрын
Ma x che un metro di colonnette???? Taglia ste brutture
@SLPCamaroLT Жыл бұрын
I have a tt02 Put a Corvette body on it and I used the motor and striped the spur gear. I'm currently upgrading everything anodized.
@cherandissanayake9530 Жыл бұрын
The app is not available in Android Play store... This is insane... These guys are making the chip and people are buying it and after that they get to find out that the app is not available in Android Play store...
@JohnBattistini00 Жыл бұрын
That's crazy. Have you tried calling customer service?
@cherandissanayake9530 Жыл бұрын
@@JohnBattistini00 yes they told me that they're working on it..... They should not advertise and sell it if they cannot give us the service
@JohnBattistini00 Жыл бұрын
@@cherandissanayake9530 I completely agree.
@josephwhitt47194 ай бұрын
Just Got the newest k6 it’s advertised on the box got the chip won’t connect to the truck
@androsborsato Жыл бұрын
Spur was too tight. You could tell by the drag brake it was getting.
@JohnBattistini00 Жыл бұрын
Yup.
@cutterbacon Жыл бұрын
Im not a lipo brushless man but did try this.....................tt01 raven 10tx2 67t spur 22t pinion fast tt01.
@Holmanrc Жыл бұрын
I ended up with the whole 3.0 electric roller lol
@JohnBattistini00 Жыл бұрын
SWEET!!!
@Holmanrc Жыл бұрын
I just bought a brand new never ran L8IGHT and it came with a brand new O.S. .21 but I think I would be happier with the same setup you have. I have a brand new starter box for it but I'm thinking about selling the engine and pipe because it's the Rhonda drake edition. Might be worth enough to cover the conversion kit cost.
@JohnBattistini00 Жыл бұрын
Maybe, I really don't know the value, sorry. But I do know that for myself the conversion from nitro to brushless has made it a much better experience all around. Let me know how you make out.
@Holmanrc Жыл бұрын
I have the late Model 8. Will I have to change center diff?
@JohnBattistini00 Жыл бұрын
Sorry. I don’t know.
@Holmanrc Жыл бұрын
@@JohnBattistini00 thank you
@mymessybench5498 Жыл бұрын
Do you have the roll cage .stl available
@AirVengeance318 Жыл бұрын
Damn shame your not uploading anymore. I just ordered the tt02 Subaru and watched your full build. Really great series that included all links to hop ups and showed the bags with part numbers. I really wish more you tubers did this. You had a good thing going with your channel.
@chelmswoodjunction Жыл бұрын
Hi John Just came across to your channel. I came across it as I'm looking at doing the tamiya Tamiya Subaru Impreza Monte Carlo 99 (TT-02) and i will be getting the upgrades for it and had to like and subscribe to your channel. Please keep these kit builds coming. Peter from Birmingham uk
@philcartwright8340 Жыл бұрын
Where can I purchase the roll cage. Great how to's will be following step by step on mine
@JohnBattistini00 Жыл бұрын
Its not for sale, I designed and 3D printed it. I only made the one.