full metal MATO Sherman Tank unboxing and review

buy link www.rc-panzer-s...

[@HappyDude1]

Here is the link where i change everything on the tank To make it look like oddball tank from kelly's heroes kzbin.info/www/bejne/lZbdpKGwo7JnicU

[@adolfdrippler6987]

I kinda want u to shoot the tank with ur dan wesson can u do it?

[@adolfdrippler6987]

Or can u replace the gun witha co2 powerd airsoft ?

[@HappyDude1]

@@adolfdrippler6987 Hell no 😬 are you crazy 🤪 ? And no there is no room for that

[@adolfdrippler6987]

And if the dan and wesson dosent pass thru it might make a nice dent for realisticness

[@wayneccj0710]

A suggestion for changing the color of white LEDs is to just paint them with translucent yellow paint. LEDs don't get hot & they are encased in plastic so regular model paint will work very well. Just paint 1 layer & let it dry, then you can keep adding layer after layer until it is the shade of yellow you want. I have used this method on my rc semi truck & it worked great.

[@HappyDude1]

Its allready changed with a yellow led 😀

[@stevelucchini87]

hello, The earlier Mato Metal Sharman tanks did not have bearings in the road wheels. Does this Mato Sherman have ball bearings in the road wheels? Also, are the bearings throwout all moving parts (gear shafts etc.)? Thank you for the video

[@HappyDude1]

I will check it this evening

[@HappyDude1]

Yes bearings all the way 😀

[@stevelucchini87]

Great! Thank you for the reply.. I believe the early version of the Mayo Sherman tank did not have bearings in the road wheels. They must have redesigned the road wheels and added the bearings in the later version. Does it have bearings in the upper return wheels as well? Where did you purchase the Mato Sherman from?

[@HappyDude1]

@@stevelucchini87 Yes and the link is under the video

[@stevelucchini87]

Should’ve known it was in the link. Thank you for the heads up. They must’ve changed the road wheels to accept bearings finally as well as the return rollers on top. That’s awesome.

[@KaboomaGotcha]

That's awesome tank mate sure like it great video

[@HappyDude1]

Thank you updates will come

[@ghosttjr2]

Waar heeft u hem besteld? Want er zijn verschillende versies qua electronics

[@HappyDude1]

Oeps link vergeten zetten Ik zet het bij opmerkingen

[@AhsanRabbani]

Is there a way to reduce the volume on this tank?

[@HappyDude1]

I think there was a volume button in there im not sure I have one on my controller now with the elmod board

[@frank1672]

Fury was a Firefly derivative of the Sherman a completely different beast then the one you show!

[@HappyDude1]

Well its just a modded turret with another gun

[@williamshine1346]

Fury had a T-23 turret with the U.S. 76 mm gun

[@NotLikethisComrade]

Are the sounds of the M4A3 Sherman in the video here from the factory? Greetings from Germany 😊 PS:You have my subscription: D

[@HappyDude1]

Thank you and, yes they are from factory. the queality is not to bad. But there is some delay when the sound starts and stops. Im working on the tank now replacing a lot of stuff and all the electronics and wires.

[@MarkVersion1]

is the tank made of aluminum?

[@HappyDude1]

Pot metal

[@까만머리앤-j8y]

Where did you buy?

[@HappyDude1]

Link is under the video.....

[@cowerdnerddespacito9518]

Those are some really complicated controls Glad I got a heng long

[@HappyDude1]

It was Thats why i put a elmod board in everything

[@PieAndChips]

The early Clark boards copied the Tamiya 4 channel layout. Newer Clark boards have S-Bus which is absolutely fantastic.

[@HobbyBoy-vk4mj]

You can change the remote control method according to your own preferences. Clark circuit boards support this feature.

[@lexiebloxsom8875]

Love ur content

[@HappyDude1]

Thank you sir

[@michaeless882]

Try a little glob of very thin transparent yellow glue on the LEDs. It'll look more historically correct and make it dull.

[@HappyDude1]

In the sherman build video you will see how i replaced it 😃

[@dantejayaguirresantos1569]

Mato vs hooben whats better.

[@HappyDude1]

mato

[@dantejayaguirresantos1569]

@@HappyDude1 thanks.

[@zerodarkthirty6662]

is that a pot metal they used on that tank?

[@HappyDude1]

What do you mean ?

[@PieAndChips]

Yes, the majority of the tank is made from cast zinc-alloy

[@Cormano980]

Yeah, it's pot , not aluminium, needs to be primed asap before it gets zinc rot

[@HappyDude1]

@@Cormano980 That will only happen outside with rain after years 😃

[@Cormano980]

@@HappyDude1 it happens even on display over time, many xion puma models had this problem, not a optimal material for this , I usually go with plastic or aluminium

[@kinggrimlock35]

Paint it like a army camouflage

[@HappyDude1]

im going to paint it like the sherman from kelly heroes

[@archienov]

That's probably one of the worst control schemes I've ever seen. I wonder why they made it that way. It's much too confusing. But otherwise, tank looks nice. I only have one tank of my own now. It's a full metal Leopard 2a6

[@HappyDude1]

You mean the controls to operate the tank ? I agree Thats 1 of the reasons i'm changing all the electronics There is allready 1 video on my channel and more will follow. And i also have a tiger

[@archienov]

@@HappyDude1 Yep, I was talking about the controls to operate the tank. I don't see how anyone would want to control it that way hehe.

[@sethmunoz7089]

Eh who needs an m2 when you can have a very realistic rc tank 😂

[@HappyDude1]

Exactly 😀 You will never have a ticket when driving this 😀

[@robertbowes7054]

50mm!? Wow!

[@HappyDude1]

What?

[@moreyday5480]

Rosco amber lamp dip

[@mr.rajikon3911]

Hello. Your videos are great btw. I was wondering if you could give me the L x W x H of the space for electronics? Thank you.

[@HappyDude1]

Thank you. I dont have the original board anymore its now from elmod

[@mr.rajikon3911]

@@HappyDude1 thank you for your reply. But I meant the measurement of the available space in the sherman where the electronics sit.

[@HappyDude1]

@@mr.rajikon3911 Ow yes i get it now As soon as i leave the restaurant i will check it for you

[@HappyDude1]

@@mr.rajikon3911 Here you go little buddy 20 cm L 8-10cm W (springs inside) 6-5 cm H (more space in the front)

[@mr.rajikon3911]

@@HappyDude1 thank you! How's your mato kits after awhile? Do you still recommend them?

[@ЯковЗарков-ю1ш]

Он не весит 5кг, поставь весы на ровный пол

[@thunfisch1235]

Its not a nuklear wahrhead no its something much better Bubble Wrap!

[@HappyDude1]

ow yeah there was a lot of that :) ^^

[@thunfisch1235]

@@HappyDude1 you have to drive over it with the tank and post a asmr video of it

[@HappyDude1]

@@thunfisch1235 first thing i tryed hahah :) they dont pop :(

[@thunfisch1235]

@@HappyDude1 oh :(

[@SherylNomeFairy9]

Recolor the headlights

[@HappyDude1]

I have 5 more videos were i changed everything on this tank Check them out 😀

[@Aleke249]

Era que le des unos golpecitos al tanque para que suene el metal jajaaj

[@Boba_fett327]

Miniature spoils the box

[@HappyDude1]

For the first 12 hours the thumbnail was just the box 😃

[@Boba_fett327]

@@HappyDude1 oh ok

[@ghosttjr2]

MATO Tank

[@HappyDude1]

Wow are you a psychic ? 😆😅

[@1392JOSHUA]

Hi please shout me out

[@HappyDude1]

What do you mean ?

[@1392JOSHUA]

@@HappyDude1 Can you say my name your next vidio

[@HappyDude1]

@@1392JOSHUA Ok if i dont forget 😀

[@aliagree8448]

Force

[@HappyDude1]

what ? :p