FULL Roof Rack Rock Light Install on a 2022 Toyota Tundra with an upTOP Overland Roof Rack

[@felixemnas307]

use shrinkable tube instead of electrical tape for better aesthetics, just a suggestion.

[@BM-cj7hr]

Not only better aesthetics but better protection and the proper way. Weather elements will unwrap the tape in no time. Amature installation 🤦🏻‍♂️

[@ThatCleanMT]

So much extra work for wiring. So thankful I have that AuxBeam controller!

[@marcus3jankowski]

Thanks for the instructions. Been looking for a legit video. Thanks for the in depth review! Awesome job as always

[@alexh1444]

Just purchased these, what method did you use to splice all the lights together to a single wire?

[@reypanelo]

Thanks for the easy to follow instructions

[@the_bearded_firefighter5160]

Looks good guys!

[@warlord385]

What wire are you using? Gauge? Brand? Sheathing? Link would help. Thanks!

[@d4rthj425]

GearIT 16 gauge speaker wire

[@d4rthj425]

Here’s a link to it www.amazon.com/Outdoor-Speaker-GearIT-Meters-Installation/dp/B01N3JQU7Q/ref=pd_lpo_1?pd_rd_i=B01N3JQU7Q&th=1

[@Mortiz350]

Can you do a video installing these on a Sherpa rack?

[@mikebridges4749]

The add a fuse is not reversible, because the fuse panel port is not reversible. Use a volt meter on DC and check both sides of the fuse port to ground. One will read 12v, the other will not. With or without the key turned on. Depending. If u install the add a fuse backwards and the light wire is shorted, or cut, the fuse will not blow.

[@nath2735]

it'll always be hot!

[@codyhoehne]

what is the wiring brand you used for this and I assume its 16awg would love to know brand

[@Mortiz350]

Can you show how to attach these to the Sherpa roof rack?

[@Jodywshelton]

Are you putting them on the bed rack? I have the bed rack and would love an install video on that!

[@stevendaniels2330]

Why run the black double wire in through the passenger side if you’re just going to tap them into your current switches on the driver side? It seems the add a fuse is the only thing that needed ran across

[@jpa868]

What size/type/brand of red and black wire did you use for connecting all the roof rack rock lights together?

[@SeanFoushee]

@2:11 he shows a spool GearIT 16ga Speaker Wire

[@keolateves2775]

When are these coming back in stock? I wanted to grab them during the labor day sale but they are currently out of stock :(

[@chrisridebike8]

I think for as much as that rack costs, the lights should just bolt right up…no cutting or drilling. Sherpa, SSO, and prinsu just bolt up.

[@xmldigitz1]

The thing is not every one is going mount the lights, so if they cut the hole ready to bolt up and you decide not to mount lights you’re going to have a random hole in your rack. I installed Baja rock lights on my Uptop rack and the cutting part literally took like 1 min per hole with a demel nothing out of this world.

[@Johnny_Bee]

Very nice

[@mintylane7]

Are you guys going to be offering amber versions of those lights?

[@newt0n_]

Is this just a rebranded generic rock light? I ask because of the way he explained the part about water. Had it been an in house design, I would have expected the explanation to be "we put a seal here" or something, instead he said "we opened it up and took a look and there is already a seal here". This makes me believe they just rebranded something.

[@ThatCleanMT]

What is the R4T rock lights lumen output? Baja is 400 a unit.

[@alonsojurado562]

Will this set up work in a Prinsu rack?

[@danlopez8313]

Can you hook up to the rear light switch

[@Runnin4Tacos]

Yes you can.

[@snorlaxTACO]

Sherpa, PrinsuPro, Uptop rack? 😫

[@newlion7013]

price?

[@awpel2]

whats up with all this bots lol , great video tho !