Full Wrap Kit for Stihl MS-362 or 400

[@Brian2bears]

Well done INDIANA DOUG...that last shot of the saw barred up with the CANNON looks great....

[@jvenema86]

so wonderful beautiful video friend i love it see

[@Turningwrenches85]

Nice work on the wrap kit Doug 👍

[@Sasquatch7.62]

I bought the ms362c about a year ago, absolutely love the saw! I'd like to change out the clutch cover, exhaust, and put some bigger dogs on it!

[@JamesPerry63]

Love mine as well!

[@stooster3456]

If all else fails, read the directions…ha, I think I might have to get that. Good work!

[@mrsmel269]

nice work we love our 362 cm . i was looking at a 660 and the 800 but i think a 500 might be the next one with a 30" bar. time will tell hope the night is good and the fire is warm .

[@danielbenedict9236]

I had ordered an earlier 362 with a wrap from the factory. The studs are different as well as the cover, deflector, and the nuts. I am currently working on modifying a wrap cover to accept the captive nuts, not as easy as I was hoping. I also think the larger cover somehow does a better job at deflecting noodles than the smaller version, just my perception.

[@KillingerUSA]

Thats going to be a sweet saw!

[@IndianaDoug]

Turned out pretty rad

[@johnarnettsways.8758]

Sweet saw buddy❤️🌲🪓👊🏻🙏🏻

[@White_devil1980]

I have a sthil MS 250 and I got a new sthil MS 261 C M and I love them 😎🥰🥳

[@GCL61]

Beauty saw. Great work

[@chevy7134]

My 2022 362R full wrap came with the newer style west coast clutch cover like the 462R or 500iR..

[@chevy7134]

Keep that big clutch cover for your future 044.👍

[@IndianaDoug]

Yes😃

[@adamarthur9672]

My only complaint with stihl chainsaws is the crummy felling spikes that comes on the pro saws.

[@JandSChainsaw]

Honestly imo a bump in compression and muffler mod is all It needs

[@tantonrosencranz2718]

Looks good

[@IndianaDoug]

At least🤷🏻‍♂️🤣

[@blaablaahi]

I’ve been waiting on one of the wrap handle kits for months from Stihl in Texas. Ridiculous that they’ve taken months

[@IndianaDoug]

Pricey🤦🏻‍♂️

[@CharlesBrisco]

I think I'm gona pick one up for the 400

[@IndianaDoug]

Do it. I gained like 3 hp😎

[@johnsonlong1272]

@@IndianaDoug From my calculations you should be seeing close to 3.25hp increase in cool points!

[@emanuelguyon7418]

There is one thing that will have to be explained to me, it looks like your 362 is a mix between the old and the new, namely a 362 and a 362c. I don't know if America wants that. I have a 362 from 2010 and I have the same engine shape as yours, however I don't have the same air filter. Cylinder cooling is not similar between a 362 and 362c.

[@IndianaDoug]

The internets not ready for my saw yet😁. It’s a 362c that’s all I know.

[@gunterbecker8528]

What's your opinion on the 362 any problems u experience with solenoids n bar oiling issues etc. ? 362 or 400 sthil saw , chuck in u thoughts on the vibrations also ,your thoughts on that please! I thank you in advance Gunter

[@IndianaDoug]

Been one of the most reliable saws I’ve had honestly. It was lacking a bit for the power to weight, but after the Egan straight shot and a sharp HEXA CHAIN, it perked right up. A 400c is certainly a better saw. If I were to buy new, it would be the 400.

[@Justinbpierson]

Larger cover is better safety wise when utilizing the wrap handle.

[@IndianaDoug]

Oh I see, hmmm🤔

[@joshuaraines7574]

Where did u get the kit???

[@IndianaDoug]

Stihl dealer

[@jimbusmaximus4624]

Never owned a 362, but I can't say anything bad about the 036 (I just won't mention the faster, more reliable, durable and much cheaper Dolmar 6100!)

[@IndianaDoug]

I’d listen🤷🏻‍♂️🤣

[@theaxeman4429]

Is this wrap handle a genuine STIHL part?

[@IndianaDoug]

Yessir. Pricey too

[@danielcarter7430]

Why not just add captive nuts to the new cover?

[@IndianaDoug]

Bc I’m lazy🤣

[@itsmeslick3431]

Will that fit on a ms 391

[@IndianaDoug]

The paperwork only has 362/400, so I’d say no.

[@bradypye2410]

Where did you purchase this kit

[@IndianaDoug]

Dealer

[@bradypye2410]

@@IndianaDoug thank you do you still have the part number

[@IndianaDoug]

@@bradypye2410 lol I actually threw it all away but you can look on eBay the kits are on there, just crazy price

[@redman715]

🫡

[@carbonEYE007]

You bouncing the trigger on the screw gun drove me insane… I bet you strip out quite a few doing that foolishness Doesn’t it have a variable speed trigger ffs? Speed control? Plastic screws and an impact into plastic or metal objects is a recipe for disaster as it is add loss of control bouncing the trigger (even starting it) wow…

[@IndianaDoug]

Plastics screws?🤣 Also, then don’t watch if you’re gonna cry over something you don’t like. Pretty simple stuff👍🏻