GT500 gets a must have Modification from VMP!

We install a VMP triple pass heat exchanger to help cool things down!
Discount codes
SA731: www.bolomotors...
2012 GT500
Mods are
2.5 VMP Pulley on stock supercharger
13/14 GT500 injectors
VMP triple pass heat exchanger
McLeod RXT 1200 Clutch
Lethal performance 3” hpipe with stock catback
Drive shaft shop 1 pc 3.5” driveshaft
BMR rear sway bar relocation kit
Ford performance intake resonator eliminator kit
Tuned by Wengerd Performance
Dynoed on dynojet
535rwhp and 550ftlbs SAE corrected
548rwhp and 564ftlbs STD corrected
Thank you to all my subscribers!
To send pictures or video to be used for subscribers ride section of videos please email submissions to [e-mail]
Please include name for the photo or video to be credited to. Also city and state if your location if you would like that to be included.

[@tinstar5080]

Great install! I've had my VMP dual fan, triple pass on for about 1 year with the stock pump and EGR intact on my '11 GT500. I can keep cool on a 20 minute road course session in the heat. By the way, that factory 90 degree hose your side kick cut should have been used at the bottom of your pump to make that 90. That new straight hose may collapse and restrict your flow. That stock inter-cooler he's standing on is $1200 new from Ford.

[@sethster70]

Good video, it’s cool seeing familiar landmarks in these videos while you’re driving. Back before my son was born we made a many of trips to Jackson.

[@SpeedAddict731]

sethster70 thank you!! Need to bring that car to Jackson Dragway sometime!

[@sethster70]

I plan on it, I wanna goto Memphis Friday but probably won’t make it. I still got some stuff to upgrade on my car. It’s still got the factory 2.73 gears and it’s killing the 60ft times.

[@SpeedAddict731]

sethster70 yea change them gears out. I won’t be able to run this weekend either. Won’t have the clutch broke in by then.

[@sethster70]

I’ll probably goto pickwick if the rain holds off Saturday. I did fix a cylinder 3 misfire and it feels a little better.

[@GearHead704]

Break in periods aren't fun for sure. Can't wait to see it on the track again. Speaking of that I'm going to the track tonight to see if I can get the vert into the 8s on my street tires

[@SpeedAddict731]

GearHead704 no I hate breaking in anything lol. Hope to be going to track soon. Doesn’t look like I’ll have it broke in by this Friday. Good luck at the track! Looking forward to the video!

[@akooner09]

Thanks for making this video, helped a ton .

[@traenknersgarageandspeedshop]

nice install.. VMP makes some great stuff...

[@SpeedAddict731]

Traenkner's Garage and Speed Shop Thank you and yes they do!

[@BOSS-jf7on]

Comedy relief was hilarious. That dude kills it, you gotta make him a regular on installing video's. That heat exchanger looks to be a quality piece. And the IAT's did drop, considerably. Thanks for the clutch update. I have been following the break-in progress. The break in process of beding the flywheel, without roasting the clutch, is a common rookie mistake. Give a little more detail and progress if you could . Thanks for sharing.

[@SpeedAddict731]

1805 BOSS Thank you. Yea he does give a little comedy relief. The thing is he does that whether camera is rolling or not lol. Yea a lot of people get on clutches too soon and it sucks when the clutch decides it’s not ready. Most think you just have to drive 500 miles of any kind and your good. It’s really the clutch actuations/engagements that break it in. I’ll hit on it a little more in the update I do on the clutch.

[@IMGONEIN60]

Awesome install 👍🏽👍🏽

[@SpeedAddict731]

IMGONEIN60 thank you!

[@gregcothrum4045]

Good video man have a great day and stay safe 👍

[@SpeedAddict731]

Greg Cothrum Thank you and you do the same!

[@GoFastNation]

Great vid brother!

[@wyliecoyote5.082]

One day I'm gonna be like, hey honey there goes shelby ken!!! Next time in Jackson.

[@SpeedAddict731]

Wylie coyote5.0 never know I’m all over the place in Jackson!

[@Thelegendking-yj4bm]

How did you jump the relay to turn on fans ? For 06 gt s/c

[@pdmustgtd1013]

I will rub through that cloth tape. Put nylon sleeve that they use on harness (stuff that looks like heavy cloth) works great

[@SpeedAddict731]

pdmustgt d it’s not really touching with how I got it. I’m going to check on it and see how it’s doing here shortly.

[@pdmustgtd1013]

I'm a tech too but on big trucks

[@akooner09]

Do they sell the heat exchanger without the fans ??

[@BeardsandCars]

So how many numbers would you say that triple pass is good for in drops of iat 1 and 2? That's probaly gonna be my next mod but not sure if itll work with my kenne bell..but pretty sure it will..I just did a 170 tstat and wish I would have done it months ago

[@SpeedAddict731]

Beards and Cars Its running around 10-20deg cooler. Where it helps out the most is sitting in traffic or just sitting idling . It doesn’t jump up to crazy high numbers. Yea it will work just fine. I’ve been debating a 170* thermostat.

[@BeardsandCars]

@@SpeedAddict731 thermostat helps for sure ..man once my car reaches 130 to 140 it only goes down 3 or 4 degrees no matter wether I'm driving or not

[@SpeedAddict731]

Beards and Cars yea I haven’t reached 130-140 yet but I haven’t ran it hard because I’m breaking in the clutch. But usually with stock HE it would get up to there no problem in traffic or letting it idle. It stays a lot cooler. Definitely worth the investment.

[@BeardsandCars]

@@SpeedAddict731 thanks..probaly be one of my next mods...or swap to E85

[@jaysintrouble]

I think I seen you leave pickwick drag Saturday in your red mustang where you there

[@SpeedAddict731]

Build3r KZbin wasn’t me. Probably Nick and his wife.

[@fordtechlife]

Did he say crock a tech lol 🔴🇺🇸🔧👍

[@Thelegendking-yj4bm]

Is that wiring the same for a 06 gt S/C

[@TooneTv]

Dammit I’ll take second again I’m slacking and I can’t for my ride in that beast

[@coyotecarguy2076]

Toone Tv . . . . Gotcha!!!!

[@TooneTv]

Coyote carguy man you are quick

[@SpeedAddict731]

Toone Tv we can make it happen when the clutch gets broke in. Can’t wait to add more power.

[@coyotecarguy2076]

First!! YeSSSSS!!!!!

[@TonyM-zi9rq]

I might have got ya Al, but I had to run out and diagnose a no start issue on my sons car... Bad fuel pump yay.... No pressure at rails and blown fuse, replace fuse and it starts but barely and wont idle... At least its easily accessible from under rear seat.

[@SpeedAddict731]

Coyote carguy 😎

[@jetcity7156]

💯💪

[@SpeedAddict731]

Jet City 😎

[@mistadontplay9610]

Whinnnnnnnne👌

[@FoxcastMedia]

FFFFFFFIIIIIIIRRRRRRRSSSSSSSTTTTTTTTTTT

[@SpeedAddict731]

Foxcast Media 😂😂