Preliminary video of my new animatronic head. Just the mouth for now. Total of 14 servo's used and controlled by 32ch servo controller. All white parts are 3D printed in ABS. The lips are printed in Ninjaflex.
Пікірлер: 147
@EvilGears4 жыл бұрын
Now I know who started the production of the Mass Production Evangelions.
@heinrichespach36154 жыл бұрын
Wow, just... Wow
@dead-ishchannel62124 жыл бұрын
Where’s unit 01 when you need em
@rentaspoon2195 жыл бұрын
Do you want to know how I got these scars?
@jmarpineda9154 жыл бұрын
youre JOKING right?
@JOELwindows74 жыл бұрын
This is your daily dose of Recommendation Mouth mechanics for android
@EdS8084 жыл бұрын
Is their a chance of getting a stl file ? A good project for sure.👌👀👀
@WillCogley6 жыл бұрын
This is fantastic, wouldn't be surprised if your channel blew up pretty soon!
@TheDutchEdition6 жыл бұрын
Thanks. I took a look at your channel and you have some very cool projects as well. I’m really looking forward to see the actual version of the machatronic hand. An animatronic hand is also very high on my to do list.
@WillCogley6 жыл бұрын
TheDutchEdition Oh thanks, I should have some more videos about that up soon, progress is super slow though haha
@grammarnazi74284 жыл бұрын
Make it say “come with me if you want to live.”
@ndung58614 жыл бұрын
Or "i'll be back"
@grammarnazi74284 жыл бұрын
Yes!
@Bobsheaux4 жыл бұрын
"FEED ME, KRELBORN! Feed me NOW!"
@integza4 жыл бұрын
This is just amazing ! Well done !
@Polar_Onyx4 жыл бұрын
Me: maybe the androids want peace the androids: *sounds of hellish screeching me: aight im boutta head out
@michaeldougherty60364 жыл бұрын
Extremely impressive. I'm not sure if you care to try animating a specific speech pattern. But I might suggest filming it at half speed and then speeding it up to match the audio. That's basically how they did Little Shop of Horrors so well, back in the day.
@devvratbani52094 жыл бұрын
That face when you just defeated a redhead, and ate her evangelion
@MaxBrainDevices4 жыл бұрын
Great work with lips
@colebregman6734 жыл бұрын
I'd really love any type of files for this, I'm working on an animatronic myself, and it would be great if I could see how you did it
@cajundude62a Жыл бұрын
Did one myself check it out
@BendyTheGoofE Жыл бұрын
When are you coming back?
@HunterIrving4 жыл бұрын
Very cool! Thanks for sharing.
@calamar81994 жыл бұрын
i can only think of what wonders that robot mouth could do like replacing broken jawlines of soldiers and old people you thought of something else didn't you?
@ishyish10014 жыл бұрын
Imagine if this is what robots communicating sounding like
@zilchthegrate634 жыл бұрын
No offense, but I love how this video was made in 2018 but it was edited like a 2009 KZbin video
@GiskardRevenlov4 жыл бұрын
Not everyone spends 90% of their time on their computer editing shit, chances are they didnt want to buy a program and wasnt comfortable torrenting one
@zilchthegrate634 жыл бұрын
@@GiskardRevenlov good point
@Hunleff4 жыл бұрын
My brain: oooo Circus Baby from FNaF!!
@Zachary3DPrints4 жыл бұрын
Oh wow, that many servos? 😱 and that just for the mouth.
@lucas90525 жыл бұрын
Do you will to share the stl files ?
@Olivia_Evil3 жыл бұрын
Wow! Looks very impressive!
@hudreous5 жыл бұрын
Are the files for this available to purchase? Let me know!
@delusionwalker88525 жыл бұрын
This is so f...ing coooool I am jealous of you that you can do such things
@lycankid5 жыл бұрын
I'd love to see a video of the moving mouth in the rest of the previously posted creature head
@squalemodelstv80926 жыл бұрын
It's a very great job. I would like to know more about this (stl, structure, and more, more,more!!!^^)
@BenyBoy034 жыл бұрын
There is so many things wrong with watching this but it's cool
@lusivekitty3 жыл бұрын
that kinda looks like the lips from dairy queen pretty cool :)
@SuperMarioJustin44 жыл бұрын
Put it in green rubber skin and orange lips, and you got yourself an Audrey II!
@levibk95944 жыл бұрын
Now that's some creepy stuff right there
@cajundude62a Жыл бұрын
NICE!
@cajundude62a Жыл бұрын
did one full animatronic myself check it out
@legomasterbuilder91184 жыл бұрын
But does it give heads
@gm_construct80244 жыл бұрын
Everything is fun and games till this thing bites a kid
@dragonballlukedbl12703 жыл бұрын
This is awesome
@johannesstoll45834 жыл бұрын
Excellent work! Keep it up :)
@ltdeditions6 жыл бұрын
Wow, that's a lot of movement! Very cool! What software do you use for your modelling?
@TheDutchEdition6 жыл бұрын
Thanks, I use Rhinoceros 5
@endorphinsmusic6 жыл бұрын
beautiful work
@TheDutchEdition6 жыл бұрын
Thank you
@Sketchy_Dood4 жыл бұрын
thanks youtube recommended at 2 am
@armenvegas4 жыл бұрын
Pretty cool
@marcoreginato87144 жыл бұрын
This is awesome I want to know more and how to build it!!!
@Chris_Cross4 жыл бұрын
I want to see how well it can lip sync.
@dweagon4 жыл бұрын
Somebody’s about to create skynet
@cajamanual67134 ай бұрын
WOuld be nice if you work with someone else to make a custom mask of "Sauron" mouth and using a AI and your microphone or scaning your face you can recreate the movements in real time of you in the robot. PD: Sorry for my english.
@MrBlack09504 жыл бұрын
I both love and absolutely hate this.
@fobit7763 жыл бұрын
Where have you been
@EdS8084 жыл бұрын
You should think about adding this to the Inmoov project
@lewismiller7223 жыл бұрын
i dare you to make a full head
@UnwrappingByMimiKoteng4 жыл бұрын
Joker?
@PhG19614 жыл бұрын
Awesome !
@Angel-jd7df4 жыл бұрын
At first I thought the title said "Moth" and I was very confused
@willettfx6 жыл бұрын
Very Nice !
@deathsonggaming3 жыл бұрын
Cool!
@bluestonebest18934 жыл бұрын
this thing have its potential. is it on the 1:1 scale to the reality? (sorry i m not english)
@bcs76865 жыл бұрын
Subbed for this video alone good work
@CathodeRayKobold4 жыл бұрын
Widely available cheap parts won't last under commercial use, unfortunately. This would be great for a movie prop though.
@smeemeepee61724 жыл бұрын
Five Nights At Freddy’s all over again
@officialxibro4 жыл бұрын
Think I could get the stl files as working on a full body animatronic and want to incorporate this with the rest of the build
@codedimaggio11 күн бұрын
Any chance you will release the STL files for this?
@TheDutchEdition7 күн бұрын
No sorry
@krasnos4443 жыл бұрын
Does anyone know if this man is alive or got jump scared to death by his animatronic
@yancibrahim4 ай бұрын
What is the material of the lips? And where can I get them? Can you help me ? :)
@TheDutchEdition4 ай бұрын
The lips are printed in Red Ninjaflex Filament
@Maddahc2 жыл бұрын
This is awesome. I am trying to figure out how to make a set of animatronic puppets simply open and close their mouths to lyrics. Do you have any suggestions on how I can figure out how to make this or what I would need?
@Singleraxis4 жыл бұрын
Uncanny valley intensifies
@kiwi85174 жыл бұрын
Its good
@conan14994 жыл бұрын
great
@RapistsDeserveTheGuillotine Жыл бұрын
If I had a special request for animatronic stuff (and if you would be willing, I could pay you for it and shipping and all), where would I be able to email you?
@iluminatu81174 жыл бұрын
One guy are trying to make a robot Filipe xD
@PadMalcom3 жыл бұрын
Hey, great work. Are there any news on the stl files? :)
@eventdesignlab5 жыл бұрын
Just wondering if you have gone any farther on this build?
@jesusjar114 жыл бұрын
A EVA in serie
@ronaldspencer5473 жыл бұрын
Very simple to make. You just need a 3D printer, some spare time, and a pHd in electrical engineering.
@carlosriccosalazar97904 жыл бұрын
Fantástico felicitaciones amazing
@nvl45934 жыл бұрын
Good
@sweatanddiet29173 жыл бұрын
Hi guys! amazing job! Can you share this project to download? thanks. JJ.
@chesteramstrong25924 жыл бұрын
Tulio estamos al aire
@numbundy80783 жыл бұрын
Put a latex mask on it and i bet it'll look amazing
@goal4kidz3 жыл бұрын
How much would you charge for something like this. I would like to commission you for a project like this?
@j1unt1ng905 жыл бұрын
GodLike!
@joseangelrodriguez24275 жыл бұрын
is possible to download the parts for printing??
@JuanSebastianGomezGiraldo4 жыл бұрын
Please share or sell the .stl :D Great work
@matthewmasone61852 жыл бұрын
Wow! Amazing! I would love to buy your files for 3d printing. If you are interested let me know!
@Sulphamic4 жыл бұрын
so want to build this but sadly no STL on thingverse
@arcadebuilder5333 жыл бұрын
Can we buy the files from you?
@furkangedik48994 жыл бұрын
Hello I’am Furkan from Turkey. I am a student of mechatronics engineering and want to make a robot for my homework. I have a 3D printer but I'm having a hard time with the design. Can you help me please?
@davidgana5935 Жыл бұрын
This is awesome. Is it up for sale or where can I get something like this?
@devranali2219 Жыл бұрын
Sorry bro, But that homemade and u cant get anything like that anywhere
@er.kashinathrathod86694 жыл бұрын
can i control with PLC
@KNARS5 жыл бұрын
Waanzinnig werk man! Echt super vet. Is er een manier waarop ik je handig kan contacten? Of kan je mij een berichtje sturen? (Heb het geprobeerd maar het is gedisabled op je kanaal) Thanks!
@msfanfilmstudios27704 жыл бұрын
How to make?
@canadiantactical40675 жыл бұрын
Remarkable work. Please let me k ow of you do any contract work.
@redfishcam83284 жыл бұрын
I really love this content. Do you have discord?
@Bigman_Carson4 жыл бұрын
The fact that it has teeth makes this 10 times worse
@mon0light4 жыл бұрын
It can't do "woo" tho
@egetok63819 ай бұрын
can you make me one
@Jay-vy3ut5 жыл бұрын
Can you give us the 3d print
@lucasvangeel43614 жыл бұрын
Wow
@marshall88734 жыл бұрын
Its cyberpunk bro
@malcommadia83546 жыл бұрын
what software are you using to control?
@TheDutchEdition6 жыл бұрын
I used the pc program supplied with the 32ch servo controller to record a script. It's just playing the script
@malcommadia83546 жыл бұрын
im looking for a free animatronic software.. did you know someone?
@malcommadia83546 жыл бұрын
you did a realy good job!! hugs from brazil :)
@rodneysmith79796 жыл бұрын
will there be plans to sell the files to make it on 3d printer ?
@TheDutchEdition6 жыл бұрын
No not for the moment
@tb45g6 жыл бұрын
Are there plans to share the files for free? I've been working on my own (simple) designs lately and I'd love to look at them! More interested in the modeling aspects right now, rather than actually printing anything. What software did you use to model the assembly?
@Illijah025 жыл бұрын
how much did this cost you?
@TheDutchEdition5 жыл бұрын
Not to much, couple of cheap ebay servo's, ball bearings and hobbyking ball joints. Rest is 3D printed.
@Illijah025 жыл бұрын
TheDutchEdition thank you, i really appreciate it. i hope i can do something similar. i am just getting into animatronic building. again, thanks!
@budekins5424 жыл бұрын
AKA Intelligent Design.
@lapidations4 жыл бұрын
Please, make it speak in google translate voice arbitrary text with the correct speed and movements. I understand this would be really hard, but so was doing all that you done until now. It would be delightful to see and hear this happening. I can offer some help with the programming if you need it.