Fund your woodturning hobbie with little scrap logs.

[@colinmacdonald404]

Thanks Will👍Cheers

[@William_Kenny]

Thanks very much Colin 👍😊

[@raydriver7300]

56th like today. I hope they sell quickly for you. What an interesting video, Will, producing such well crafted bottle openers. Have a lovely weekend with your family 🌞

[@William_Kenny]

Cheers Ray appreciate you watching mate enjoy your weekend also mate, Kind regards From Will 👍

[@raydriver7300]

@@William_Kenny Kind regards back 🌞

[@WoodenItBeNice]

They look lovely Will. Gorgeous finish on them. Take care Will. Cheers, Huw

[@William_Kenny]

Cheers buddy thanks for watching, Will 👍

[@thomasquinn405]

Hi William another fun little project hope you do well at the crafts fair you do make beautiful projects best of luck

[@William_Kenny]

Thank you kindly Thomas I enjoy making small stuff for a change, Cheers From will 👍

[@MikeHolton]

Wonderful little project, especially with the festive season coming. You got a beautiful shine of that laburnum, all of them in fact! Thanks Will

[@William_Kenny]

Thanks very much Mike a fun little project to turn, Will 👍😊

[@greenhavencreat7178]

Nicely done, William

[@William_Kenny]

Cheers Brian appreciate you watching mate 👍

[@TheVineyardFarmhouse]

Well done!

[@William_Kenny]

Thank you kindly 👍😊

[@dianebyrne2294]

Very nice will.

[@William_Kenny]

Thank you kindly appreciate you taking the time to watch, Will 😊 👍

[@WeeVal]

All gorgeous Willie and lovely shine! 😃

[@William_Kenny]

Cheers val glad you liked them, Will 😊

[@eamonkenny3324]

Lovely job Bill

[@William_Kenny]

Cheers buddy thanks for watching 👍

[@danslejardindecytrus]

Merci beaucoup pour cette très belle vidéo ! 👍🙏

[@William_Kenny]

Thank you kindly 🙏 ☺️

[@danslejardindecytrus]

@@William_Kenny Have a nice day!

[@Mckmake]

Lovely job Will

[@William_Kenny]

Cheers mate thanks for watching, Will 😊 👍

[@ianthemonkeyhangerturner]

Thanks for sharing great little project I have been thinking of making some of them now I am Cheers Ian

[@William_Kenny]

Thanks very much Ian a fun little project to turn and a useful piece at the end, Cheers From will 👍

[@frozentwiddlelump]

As a woodturning beginner, I *really* appreciated you stating the lathe speed and the type and size of turning chisels you used. That little jamb chuck is a great idea; I'll finally be able to make the end of my openers nice and smooth. :)

[@William_Kenny]

Cheers mate glad you liked it and appreciate you watching and commenting, Kind regards From Will 👍

[@BBTurning]

Very nicely done William mate and quite a bit quicker of a method than the way I do them. I will be trying out your way the next time. Shay

[@William_Kenny]

Thanks very much shay appreciate you taking the time to watch mate, Will 👍

[@nigelharvey210]

Nice one mate i like your jam chuck as well its a good idea. good luck with the fair

[@William_Kenny]

Thanks very much Nigel appreciate you taking the time to watch, Will 😊 👍

[@valeriehenschel1590]

Production made easy! This week I have “butterfly bush” wood to work with. The branches are perfect for this type of project. For end sanding, I chuck up a sanding disk on to the lathe and hold the handle up to it. Very fast to do all at one time, just changing the grit paper as needed.

[@William_Kenny]

Thanks very much Valerie I do use a sanding arbour sometimes, Never heard of butterfly bush before have fun turning it, Kind regards From Will 👍

[@valeriehenschel1590]

@@William_Kenny Buddleia, about 120 different varieties. Common in temperate gardens because it is very low maintenance and attracts pollinators like butterflies. This bush was old enough to give me 4-5” diameter wood. Light colored, and fairly dense with very flaky bark.

[@William_Kenny]

@valeriehenschel1590 buddleia now I know what it is 👍😊

[@mashmade-airth]

Hi Will, cracking little project with lovely little openers. They look like great easy sellers for you. I'd call the colours of the openers gold, chrome, gunmetal & antique brass / bronze. Can I ask you William, I have Rutlands chucks, the P75 & the P100, with loads of their jaws. As they don't sell ' blank' chucks do you know if their jaws fit any other make of chuck ? Cheers mate 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@William_Kenny]

Cheers Jim thanks for watching mate I didn't explain the colours very well 🤣 Most of my chucks are record Power and nova so all the jaws are interchangeable, I only have one little Rutlands chuck so not sure if they suit and other chuck, Cheers From will 👍

[@mashmade-airth]

@@William_Kenny thanks will👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@racheldray1057]

I bet they will sell well, they are beautiful. Have you also made ring holders? I haven't done a craft fair, but I made a couple for friends and they were easy to do and enthusiastically received. I imagine they would sell quite well too.

[@William_Kenny]

Thanks very much Rachel, ring holders something I've yet to try, Will😊

[@DavidBird-uu8km]

Very nice, did you give any thought to using threaded inserts?

[@William_Kenny]

Cheers David I've never seen the kit with the inserts, Will 👍

[@STMwoodturning]

Nice quick project. Why don’t you put a little glue on the threads before screwing them into the handle?

[@William_Kenny]

Thanks Stewart, they are pretty well tight in there but a little glue wouldn't do any harm, Cheers From will 👍

[@spiderspid]

Hi will , very nice job 👍 but looking on Amazon the ones I see seem like the tread is only bout an 1” , do you have a link or point me in the right direction ( brand name etc) cheers Jeff ( spiderspid)

[@William_Kenny]

amzn.eu/d/3qod6CI Thanks Jeff good to see on the channe,l there is the link, I hope, the one's I used the tang is about 30 millimeters, Cheers From will 👍

[@Dore60]

Nice job Will

[@William_Kenny]

Cheers Andy appreciate you watching mate 👍 Will 😊