Fusion 360 beginner's Exercise #15 | Sheet metal cone | Fusion 360 Sheet metal Tutorial |

Check out this channel (MECHBUZZ) - / @mechbuzz
Download 2d drawing here -
drive.google.c...
SUPPORT ME - www.paypal.me/...
GOOGLE PAY - muammarqazzafi@oksbi OR [phone]
my Fiverr account - www.fiverr.com...
Learn how to make a sheet metal cone in fusion 360 , and how to make a flat Pattern out of that.
Sheet metal is metal formed by an industrial process into thin, flat pieces. Sheet metal is one of the fundamental forms used in metalworking, and it can be cut and bent into a variety of shapes. Countless everyday objects are fabricated from sheet metal. Thicknesses can vary significantly; extremely thin sheets are considered foil or leaf, and pieces thicker than 6 mm (0.25 in) are considered plate steel or "structural steel".
Hi guys in this video I will show you how to make a 3D model from basic 2D drawing in fusion 360.
This video will focus on developing skills in fusion 360 especially for those who are absolutely new to fusion 360 user interface.
This video will focus on improving the beginners skills in fusion 360.
This is nice exercise to put to practice what we have learned so far.
You guys can download the 2D file from the link given above for practice.
In this video you will find about basic use of commands like extrude, fillet, chamfer, loft , trim , stitch , sweep and creating sketch. sheet metal
WATCH MY SERIES ON BEGINNERS EXERCISE
Exercise #1 - • Fusion 360 beginner's ...
Exercise #2 - • Fusion 360 beginner's ...
Exercise #3 - • Fusion 360 beginner's ...
Exercise #4 - • Fusion 360 beginner's ...
Exercise #5 - • Fusion 360 beginner's ...
Exercise #6 - • Fusion 360 beginner's ...
Exercise #7 - • Fusion 360 beginner's ...
Exercise #8 - • Fusion 360 beginner's ...
Exercise #9 - • Fusion 360 beginner's ...
Exercise #10 - • Fusion 360 beginner's ...
Exercise #11 - • Fusion 360 beginner's ...
My official email ID- [e-mail]
Fusion 360 helps students and educators prepare for the future of design. It's the first 3D CAD, CAM, and CAE tool of its kind, connecting your entire product development process into one cloud-based platform. Download the software today, then turn your ideas into reality.
Download AUTODESK FUSION 360 - www.autodesk.c...
#fusion360 #autodesk #practice #exercise #sheetmetal #sheetmetalcone

[@jesseandcandace]

This is by far the best video and method I've found for doing this! Thanks for making such a great video!

[@radzimir2]

Thanks, great video. But it may be simplified. There is no need to create first sheet metal body. Just thicken the rotation, then use Extrude command to elongate the edge by 0.1mm, then use "Convert to Sheet Metal" command selecting the small 0.1 mm face as a base.

[@coledunlay7876]

Best video I've seen on this process. Thank you.

[@leonardoperalta2932]

Damn it !!! YOU ARE BY FAR THE BEST !!! muchas gracias por el excelente video

[@jbateham]

Well done. Thanks for the video!

[@sailingkulali]

thank you for sharing this dude!

[@kevinjosefernandezhernande3947]

Man I've always used to Solidworks but I starded to use Fusion 360 and this method is so different:( hahaha thanks for the video btw!

[@macrobionic]

Great stuff! Thank you.

[@adambergendorff2702]

excellent video, Thank You!

[@InopVirtualPilot]

Thank you, Thankyou THANK YOU soo much!!!!!!!!!

[@henrypenner437]

Thanks it was helpful

[@unnivk9464]

Thanks you.

[@ukaszkoc6530]

@SPARK PLUG Can you make an reducer like on that video but excentric? I tried in similar way like you but cannot make unfold or flat pattern.

[@naburjudesign5670]

Nice video. Thanks for share, bro. All the best for you.

[@வெண்மதி]

Super

[@MechbuzZ]

Amazing !!!!

[@denicasas9916]

hi , i have a question i am making a cone but in the part where the cone join i want to make a 2 faces of each side, my problem start when i want to make the unfold the progam said that it is a error, i woauld apreciate your help. Thanks

[@venko3211]

Nice

[@lokeshch8104]

Thanks bro. But I having one doubt, after creating a surface I should go to modify->reverse normal to see which side the normal is facing, but how come your design workspace directly shows that.

[@SPARKPLUG98]

May be you have some graphics issue , reverse side is displayed by light yellowish color .

[@lokeshch8104]

@@SPARKPLUG98 thanks for the reply

[@brendanstarkey]

Can you draw a 2 stroke exhaust chamber?

[@design239]

mail him 2d blueprint first

[@venko3211]

I am using windows 7 but not able to update the software. Please help

[@cadfornoobs9830]

Windows 7 is not supported by Autodesk products because Windows 7 is no longer supported by Microsoft. forums.autodesk.com/t5/fusion-360-support/fusion-360-announcing-end-of-support-for-windows-7/td-p/9240920#

[@drumbum7999]

in de wideo