Fusion 360 T-Splines tutorial Part 1: the basics

download your own MA chassis base data here:
a360.co/3fZnio7
download your own X chassis base data here:
a360.co/3fZpBYd
buy the MA starter kit here:
www.amazon.com/s?url=search-a...
Check out the Fusion 360 tutorials here:
f360ap.autodesk.com/courses/co...

[@cadcamstuff]

Nice work! This is a great tutorial!!

[@JavaRacingCo]

This was one of the best fusion 360 tutorial I have seen! Thank you for the detail explanations!

[@chrisyoung8062]

I learned more about t-splines and sculpt from this video than all the others combined. Thanks.

[@erichowey1568]

Thank you for making this! This helped me tremendously with my mental block with T-Splines!

[@jankhynych2440]

Great tutorial! A comprehensive and explanatory beginner to advanced tutorial series on sculpting is badly needed as there is none out there. Subscribed and look forward to another episode. Very useful, thank you!

[@Gouki87]

Jan Khynych glad you like it! Part 2 should be coming out hopefully before the week is over!

[@enricobononi8655]

Nice...thank you. I was struggling to find the way forward in modelling a canopy for my drone and this video helped me. It would be nice if you can keep doing this series and address issues such as how to embed geometry/solids in the free-form model. I.e. supports, screws holes, standoff for connection with the chassis etc.

[@room007]

Thank you, this has been a bit of a breakthrough for me.

[@georgettewebb2900]

Great tutorial. Easy to follow. Keep up the great work. Looking forward to your next videos.

[@hasanhuseyinburhan1966]

I loved this video.Perfect for beginner car designers !!!

[@ScottMoyse]

I'll be using the scale along a single axis tool to straight out edges where more often now. Thanks.

[@MrRegcheeseman]

I've been an engineer for 30 years, last used CAD about 25 years ago, so I'm using Corona lockdown to teach myself Fusion 360. I've been through the Fusion tutorials and your tutorial has been a great help with T splines. Thank you very much for taking the time to make this video, it is appreciated.

[@paulsohi9015]

happy to help! I am using the lockdown to make new videos! hopefully they'll be up soon

[@TMODCustoms]

Great tutorial, I'm trying to learn t-splines and this is the best vid I've found so far. SUB'D! Looking forward to learning more from you. Much appreciated!

[@marknorman4389]

Excellent. And well presented!!

[@MarkRyanAB]

Very helpful. There aren't many good T-Spline tutorials.

[@paulsohi9015]

more coming soon!

[@jamesthompson4062]

Great tutorial, thanks for posting.

[@douglasthomson1989]

Great tutorial. Thanks for that.

[@joshuadunlay9244]

You should really make some more! Really like how you explain how to make things easier

[@afrykanerPL]

Amazing skills. THX

[@ninjarevjames465]

Paul enjoyed this video is it possible you do a video on the chassis I know youi can download it but i think everyone would benifit from a chassis tutorial too.. Good work

[@sergeybob3224]

Thanks ! Nice work !...

[@nickabbott226]

The part where you demonstrated how you should match an equal number of faces when using the bridge/weld command was really helpful.

[@paulsohi9015]

glad you like it! I know it's very very late, but part 2 and 3 are coming soon!!

[@nickabbott226]

Hell yeah. Also crazy thing was I clicked on your video and was like, oh shit, I know that guy! Chatted with you at the SQ1conference in Chicago this past summer. haha. Quick question, I imported a fusion 360 file into keyshot, and when I try and drag a material onto it, it changes the whole product to that material. I tried unlinking the material, and also saving as an STL, but have had no luck in separating the materials. Any suggestions?

[@paulsohi9015]

@@nickabbott226 I've never actually used Keyshot lol, on IG if you reach out to willgibbonsdesign he should be able to answer that, he's a bud and a Keyshot pro!

[@ArdiUtamaIDWGD]

yes, love it

[@theroboticscodedepot7736]

Very helpful. Thanks!

[@bayanturdaliyeva2568]

so great ! Thank you

[@Andy-qt2wh]

Very good, thanks!

[@nookme]

best tutorial boss

[@tomgoodmode4718]

Thanks !!

[@cobyiv]

Solid tutorial

[@adamdavis5961]

Thanks. However, when you were straightening the edges, you grabbed it and pulled it, then put in a value (0.01) each time. Why did you move it first? Is there a reason? And why that value, you described doing it, but not why. Also, when you creased the windshield/roof, I didn't see a value for the crease, just selected and hit ok. Is there no control over the value, or did I miss where it was entered? Nice video, you said what you were doing, just not always why. I'm trying to figure out if I'm going to get into F360, figured tutorials would help. Thanks.

[@paulsohi9015]

Hi Adam! the function I did is a trick where if you scale an edge down to 0.01, it makes it straighten up, that's why. I moved it for visuals for myself. The crease function has no integer value associated, it is a binary crease or not creased. If you want control, you can do that with the bevel function! Thanks for the feedback, I am long overdue to make part 3 of this

[@user-ln4pf6ku9p]

Thx master!

[@BasicFolders]

I just discovered your channel, where is that little supply cart on the desk from?! I can’t believe that is it the main question on this video, it is adorable!

[@paulsohi9015]

hahahah! all good, it's from ikea, very handy for at home if you are a hobbyist :)

[@BasicFolders]

@@paulsohi9015 Thanks for the info! Pro's in almost every field seem to have the most interesting items on their desks. 😊

[@michaelkelly3158]

Hi Paul, would you be able to make a tutorial on how to make the grovemade speaker, or at least the steps required to make something 'like' this in fusion? Really struggling to get this done :(

[@paulsohi9015]

Do you mean the geometry creation or how to manufacture?

[@michaelkelly3158]

@@paulsohi9015 The geometry, I can't figure out how to make the model in Fusion, or something similar. Thanks!

[@paulsohi9015]

@@michaelkelly3158 so for the usual reasons I wouldn't be able to model the grove made speaker, but I can do something inspired by for a tutorial!

[@michaelkelly3158]

@@paulsohi9015 yeah I understand, it's less about making the grovemade speaker and more about being able to model the kind of horn they have within there. I couldn't achieve the consistency of the wall thickness between the outside of the speaker and the horn.. if that makes sense? Anyway, a tutorial for something inspired by it would be amazing!

[@swandusk6033]

do you still have the MA chassis STL file for sale or free? the link is broken... thank you, again...

[@paulsohi9015]

apologies, both links have now been updated in the description

[@rudityasw.a1823]

Where I can get the Chassis? cz I tried to click the link on the description and this page say, Sorry. You don't have permission to access this page.

[@paulsohi9015]

apologies, both links have now been updated in the description

[@4funrc11]

👍 Great video on t-splines! Would love to see more, much more actually. 😆 PS - The links to your files (Fusion) are not allowing access. Sorry.

[@paulsohi9015]

apologies it took so long, but I have updated the links in the description

[@4funrc11]

@@paulsohi9015 Thanks! 👍 And it's no biggie about your response time, really. 😃

[@huubslinger]

what is the reason for scaling to 0.01 instead of 0 ?

[@paulsohi9015]

old video, back then you couldn't do it to 0 lol

[@nesd6595]

i cant access to download the X Chassis

[@paulsohi9015]

apologies, both links have now been updated

[@AmbionicsUK]

Watching for third time...

[@superblue5871]

I'm logged into fusion 360 but it says I'm not authorized to access the chassis base data.

[@paulsohi9015]

Hey Kevin, really sorry about that, it looks like an error created by some data shuffling on my end. Can you ping me on IG with a DM? I'll email you the files directly for now and then find some time to create new links for the description

[@paulsohi9015]

apologies, both links have now been updated in the description

[@guitarfumar]

When I extrude the roof line, I have no faces option. It’s one face only. The other lines extrude properly. Any idea what is going on? I’ve extensively googled to no avail. 🙃

[@paulsohi9015]

hm, I might need some images to help you out there. DM me on IG with some screenshots: FusePS

[@user-cx1sv5ku5d]

So do I!🥲

[@guitarfumar]

@@user-cx1sv5ku5d It’s been a while but I believe we figured out the issue. If you’re having the same issue there’s a way to add faces manually. Let me know if you need help.

[@user-cx1sv5ku5d]

@@guitarfumar wow, thanks for the reply! I'm not sure what the problem was, but I seem to have solved it by adding an extra control point there in the spline curve.😀

[@guitarfumar]

@@user-cx1sv5ku5d glad I could help!

[@alejandroperez5368]

Remember guys: 0.01 Don't know why, though.

[@fuzzdogs]

no offence but the amount of times you said "adds some character to it"

[@paulsohi9015]

but it did add character, didn't it? :P

[@tedgrimshaw4933]

Hi Paul, This is the first tut of yours that I've started to watch and unfortunately I have had to stop. It is the undulating sound of the narrative that is affecting my taking it all in, high - low - high - low. I would respectfully suggest trying to keep an even volume and also to be more decisive in your actions. It is not helpful to the student to have the tutor hesitating on what icon he should be pressing. So, again with full respect, watch your own tutorial and see if you get what I am talking about. Thank you and kind regards. Ted

[@Anonymouspock]

Your audio levels going to and from the computer environment change a lot. Please change them to be more consistent throughout the video.

[@paulsohi9015]

will do for the future, apologies, I didn't notice it when editing