FX Wildcat .25 regulator adjustment

[@ToreDL87]

A 3-way power adjustment on these guns from factory would have been nice, especially considering the Streamline at 300 bucks less has that.

[@hsnmzpak6730]

great to see you working on a wildcat. have you drilled a breath hole in the tester? please let us know what max velocity can you get from the Wildcat. I would appreciate if you can show the hammer spring and the hammer weight of the .25 wildcat.

[@AffordableAirguns]

Sir,, thank you to save my live I though the I lost my wildcat! Yesterday I found my bullpup empty so I try to filled back and I hear air coming out by a tiny small hole in the tank. Waching this video I figured out how to fix it! But was scary cause I never take a part any rifle! I find out some kind a corrosion around the O rings. I cleaned out and works perfect. After all I have a little feeling the problem is cause by my handpump!! Found water inside the thank!! Any way thanks a lot for helping people.god bless you

[@greekairgunners406]

Hi esting. Can you please make a video how do you fix a regulator when it has air leak ? I have the fac version. Thank you and happy new year.

[@rallyeraider]

what did you get @ 150bar? is this for .22 or .25?

[@Ehssanmoradii]

Cheers

[@trpe71]

Hi Esting, great info! Just wondering where you got the reg tester? Thanks!

[@ernestrowe5061]

+trpe71 ask, John at: [e-mail]

[@KALSONIK]

Hi nice video by the way... i have a air leak in my wildcat. ,but i dont where from she loses air very slowly..cock or not...i tried with water and soap but didint see any bubbles... maybe some o-ring inside the block? greetings from portugal

[@naser7611]

Hi Kalsonik I had the same problem and i done what all you done on your gun ,the problem started soon as I increased the regulator and now im thiniking have to send it to gun smith .

[@msun1952]

trying to my 900 fps advertised on the .25 cal wildcat mkii compact only getting 820 according to my airchrony, how can i get it to 900 as advertised or can you.

[@kf230158]

Hi,can you show me,how to adjustments wildcat 0.22 regulator to 900fps ?

[@naser7611]

Hi first you can put some tape around that screw to push hammer spring more to turn the screw clockwise then you have to open the ait tube but first make it empty of ait with unscrew with allen key then yo need to the of the regulator and put allen key on middle of it and the same tome with wrench turn the lock nut slowly not too much then put them back and test it with chrono and if you wasn@t happy you can do it all the procces again to reach to 30 ft/lb or 930 ft .

[@therandomcarpenter6810]

Right hahaha

[@user-xc5xh9vc7b]

อยากได้ชุดหลอดลมค้อนและไกชุดเท่าไหรคับ