Maverick High Power Tuning

[@OH8STN]

Outstanding! After wasting my money on lots of "budget" Chinese junk, I pulled the trigger on the Maverick. No regrets! FX in entirely on another level. Thanks for sharing.

[@OH8STN]

Thanks Ernest. I added the Slug power kit to my .25 Mav. Now it pushes 34gr slugs 1025fps/80ft-lb. Front reg is set to 180, rear 150. Good consistent groups out to 250. Acceptable groups at 300. Best platform ever!

[@conorobrien3667]

Ye but did you not find the fox tungsten hammer too heavy?

[@vetteconnoisseur9531]

My .30cal Sniper saw its max power of 102-103 ft/lbs with 49gr JSB Monsters w/ the out of box factory setup... wheel setting #7 and regs were at 110/120bar and 140/150bar

[@skyungjae]

Is the 7 at the 6 o'clock position?

[@abuagil1496]

SAYA PENGGEMAR BERAT SENAPAN INI...SEMUA PRODUK FX INOVATIF DAN ISTIMEWA DARI POWER,AKURASI DAN MODEL KEREN

[@FxFanBoy]

Obviously this is a.25 cal. Would you start the regs at the same pressure’s for a.22 cal Maverick? With the slug power kit installed. We sure are getting a lot of.25 cal information this year LoL thanks

[@james1795]

Thanks Ernest. Once again. great information. Although it would be the general same procedure, how about another simple video showing a high power tune on an M3 .25 with the Slug Power Kit (700mm liner)? Thanks again.

[@FxFanBoy]

I’d also like to see a video on the pufff of air coming out of the little hole beneath the reg gauge. Seems to be a popular issue.

[@bigearl8687]

What is the issue with it? Is it loosing power or causing any issues, did they fix the problem

[@shelbygrinders3839]

​@@bigearl8687 "loosing" isn't even a word. Please spread the good news about this word, so people with an IQ higher than 100 don't have to cringe every time we read it. The word you're looking for is LOSING.

[@gutiguti3914]

Muy buen video como siempre. Un genio saludos desde ARGENTINA 👍👍👏👏🇦🇷

[@rukuringa9115]

Can I shoot slug without installing slug kit?

[@Andytn80]

Thank you Ernest! I got the Maverick compact .22 shooting 18.13gr at 885-900fps on pw5 leaving pw7 for slugs. But i couldn't get the sound to sound quieter, it's more like a smacking sounds. Any tips? Thank you

[@felipeberner9107]

Compact version should shoot with a lower hammer tension and higher pressure because of barrel length

[@Andytn80]

@felipeberner9107 thanks! I'm currently tuning for light slugs, nsa 20.2gr, es was good around 9-10 dev3 @910fps, but somehow two days later it changed to around 885fps and es also. Have you experience anything similar? Thanks

[@felipeberner9107]

@@Andytn80 nop, I got the sniper version…

[@Andytn80]

@@felipeberner9107 oh gotcha, thanks 👍

[@urled9007]

We need video about how install imbact m3 slug power kit

[@vincentvalerio915]

I’m getting close to those numbers with lower reg settings with my 600 barrel.

[@larry11251956]

So I have a 22 Mav Compact all OEM factory stud equipment and I want to tune for 4 different pellets like the Jsb 18.13, Hades 15.89,HN Barracuda 15.1 and the Crosman HP 14.3. How would one tune to be able to accurately shoot the different pellets just by adjusting the Power wheel for the different pellets

[@realblakrawb]

Figure out how much power is needed for the heavy one, tune the top range of the dial for that. See if the minimum side of the wheel has settings that suit your other ammo at the high power reg settingd. I just did this with my Impact slugs to polymags.

[@erodriguez1925]

@@realblakrawb that actually works very well. My Maverick compact in 22 caliber is set up to shoot 18.13s on PW7 at about 900 fps. 15.89s on PW6 at high 800s fps. I've been able to mess around with H&Ns and Crosman Premier on lower settings. So far, everything has been great. I just can't shoot heavier pellets because I'm maxed out on the power wheel.

[@abbaby555]

Air rifle Master class 👍

[@roykilgour9790]

What kind of airgun shoots longer and is more effective at long distances. Fx3 impact or Fx Maverick (sniper) Can you answer me honestly about that. It is incredibly difficult to get an honest answer from those on KZbin who have posted videos about FX 3 Impackt and FX Maverick. I need to shoot 300 - 400m to kill with cal 25 or cal 30. Which air rifle of the two is better for 300 - 400 m shooting. Maverik can be regulated, they say, and Impackt can be tuned, so what should one choose for 300 - 400 meters in cal 25 - 30??? Please give me an honest answer so I don't buy the wrong one. I have tried shooting with both at a dealer, but it was only at 50 m and there was no difference between the two airguns. 

[@nico-max]

Hey Ernest , what can I do if my maverick compact has a problem ? Thank 🇫🇷👍🇺🇸

[@joeymartinez8477]

What the best speed I would be able to get 65.5 gr NSA slugs out of a Maverick ? Those were 33.9 gr.

[@secondfirstsecond]

Is this official FX KZbin channel? Wondering why it has less followers and view? What's going on here?

[@hobar8031]

Did you just adjust anything before you adjust thr hammer spring? Is it factory settings then you adjust the hammer spring? Please i wanna know so ill follow your steps to adjust my maverick.. my max 7 is just 890 to 897fps .22

[@LAGN11]

Great video but now i need a impact m3 trigger adjustment video 😉

[@skyungjae]

Where should the number be on the wheel to know what setting your on visually? 7 at the 6 o'clock position right side up?

[@davidbraswell1481]

so I got my gun dialed in and set my first reg at 180 and second at 150. I got everything dialed in no leaks everything is good. I went outside and shot the first shot and wow it was super quiet no power ... so I figured it needed to be shot a few times, so I kept on. I refilled the mag and topped off the bottle at 250 bar and fired again now the pellet goes into 3/4 " plywood to the skirt not all the way through like before each shot was going through 2 - squares of plywood and hitting the back stop concrete board. I am asking could this be a hammer spring issue?? or is there a number I can call to get the factory settings for the regulators for 30 cal maverick sniper? any help is greatly app

[@2002ZRX1200R]

My .30 maverick showed up with 1st reg @ 120 and rear wide open. power wheel on 7 velocity with 44grn was ~900, Only drops in velocity no matter what/how i adjust. Current settings are 150/120 max hammer preload, pw on 7, velocity ~ 900fps. My gun refuses to shoot over 900fps.

[@ariamaguila8549]

For 120bar on the second regulator you dont need max hammer preload. As it is right now bring the power wheel to 6 or 5 and see if the speed increase. If it does you need to decrease the hammer spring preload.

[@2002ZRX1200R]

@@ariamaguila8549 it required a lot of modding by fx usa to get it to perform properly. Every single part of the gun needed reworked or upgraded. It took fx 7 days of working on it to get it to perform like it should have.

[@ariamaguila8549]

@@2002ZRX1200R I had to send mine back due to regulator creep 3 weeks after I bought it. Very disappointed, paying over $1000 and not having the quality I expected.

[@2002ZRX1200R]

@@ariamaguila8549 they fix them for free for a couple years. I'll gladly sit through months of waiting for fx to fix something (not!.) Lol.

[@chriscastillo7215]

What would be the best to for 30 cal ahold hades

[@nugrohofebri5806]

Mr .Ernest....how can i buy this FX?i live in Bali, Indonesia

[@abuagil1496]

I LIKE.....FROM INDONESIA....FX BEST FACTORY RIFFLES

[@djyul]

Do in need to change the barrel sleave to fire slugs?

[@TechTrainerAbid]

hello sir i have a maverick compact 177 calliber so how many set first & second reg even my fps is 990?i want to shoot 13.43 grain pallets,please reply sir i am a your subscriber & regulater watching your video, i search your totally video but not found my title please let me know about that as soon as possible. _________________ thank you very much

[@hamzalabandji5870]

One of the most beautiful guns I wish I had one. my life dream 🥰

[@emp731]

You can do it ,i believe you can :)

[@hamzalabandji5870]

@@emp731 unfortunately can't

[@emp731]

@@hamzalabandji5870 why not?

[@hamzalabandji5870]

@@emp731 I only have money to buy ammo

[@emp731]

@@hamzalabandji5870 ohwell..You can save a little bit and eventually you can buy 🙂

[@olsoftshark8986]

I just picked up a vp with a 600mm.Im unable to turn the reg past 100bar without loosing velocity..Pw on 7 screw maxed out. Tried 125 bar and got 660fps. At 145bar it wouldn't even spit the slug out. At100 bar I can get a 23 gr nsa slug to shoot 881 fps.. 39 ft lbs.. ordered the slug kit to try and hit 67ft lbs advertised but I'm not too optimistic it's going to add a 100percent increase ft lbs. Barrel in slug position..am I missing something? Had a compact .22 and was able to turn up the reg to 150 with great results..Not sure what's up with my new gun.csnt get through to anyone at top gun to help

[@greggsevern3277]

Where are you? What country?

[@douglasmaguis4435]

Hello, I recently purchased a maverick and I noticed that it has an air leak in the needle when fired without the cheek support, I changed all the orings and continue, is this normal?

[@FXAirguns]

Hi, if you are in the US please contact our tech department either by phone or email and we can help find a solution for you. Regards, FX Airguns USA

[@douglasmaguis4435]

@@FXAirguns I'm from Brazil thought you could help me. Here we have no technical assistance from the FXs.

[@Johnnywoo7]

Hello Ernest. Hopefully you can help me ? I have a 22 maverick sniper full power for the UK. I want to shoot 15.89 JSB. What reg setting would you recommend for the front and rear regs. Currently my ES is around 20/5 FPS can I reduce this by changing the hammer screw ? I set up the tune on setting 7 as you recommend. I love the gun I just want to get it set up to run economically. Thanks 🇬🇧

[@clothbooster]

The gun sucks.

[@ourilandia100]

Tem como mostrar mas detalhes dessas Manutenção usar uma câmera para captar detalhes da gravação do vídeo You can show more details of these Maintenance using a camera to capture details of the video recording

[@ariamaguila8549]

Hello Mr Rowe. I have a maverick vp .30 cal, 1st regulator set at 175bar and 2nd at 150bar. Shooting the FX Hybrids at 930 fps. My question is: after the gun its not been used for a couple of hours or days, the first shot is like 30/35 fps slower. Based on your experience what do you think is causing that? Thank you.

[@bigearl8687]

Wow that's weird, do it eventually go back 930 fps after a few shots

[@sariphunter]

I have the maverick sniper, I have put the slug kit but 150 bar of the reg I can't open it and the power drops. I have the hammer fully open, it doesn't take any more because it doesn't arm. Is there a way or does it work up to 150?

[@bigearl8687]

All these negative comments, is this gun any good

[@felipeberner9107]

@@bigearl8687this gun is really hard to tune, but when u tune it, u may shoot undermoa groups @100m

[@tubeyuber803]

I have a brand new maverick that was “tuned “ from where I purchased. My spread and s.d are all over the place one shot will be 890 the next 821 then 860 then maybe 870 for example. Any ideas?

[@MrSamc11]

I kind of had/have the same problem. My approach was to buy a tin of cheap pellets (Crosman Premier) and start shooting, so that I cycle the gun without wasting premium ammo. Also, try to fill the bottle as close to 250 bar as you can. That has helped me lower extreme spreads from 120 fps to around 20 with some fliers that stretch it to 40. Interesting thing is that those outliers are always on the lower side.

[@tubeyuber803]

@@MrSamc11 nice 👍. Thanks for the feedback. I definitely did not fill all the way to 250 bar thought maybe keeping at max 230-240 would be better on in in long term. ( only my logic). I’ll give that a try. Thank you

[@MrSamc11]

@@tubeyuber803 sure thing! The 250 bar fill seemed to help setting better the first regulator. I was filling it up to 180 bar and when I filled it to 250 bar, many of my issues (crazy spreads) were fixed. I also don’t think that having it at 250 bar damages the tank. Those tanks can take up to 400 bar, so 250 is actually okay

[@pitbull6951]

Good info Ernest, I have my maverick 600 mm set up at 170 on the first and 150 on the second regulator but getting a lots of differences in the velocity between shot. any suggestion?

[@crypto_creep8222]

Adjust your internal hammer spring little bit At a time. Check your shoots over a crony in-between

[@2002ZRX1200R]

Mine dropped to 617fps with the 170/150 tune that works for so many people. ATM, I hate my maverick. It feels like a chinese Impact. Clanky, rough, stiff and slow, with so much first stage travel it's off-putting and trigger adjustments to remove the ridiculous travel will not allow break to be crisp. Very disappointed in my maverick. My Wildcat Mk III and Impact Mk II are so much nicer it's almost like I got a FX clone instead of a real FX.

[@elmasloco6538]

170 and 150 it’s a lot try 130 and 110 don’t put too much pressure on regs also a good speed for a pellet is 850 and a slug 915 is good don’t blow your head thinking you have to hit the 1000 speed 👍

[@2002ZRX1200R]

@@crypto_creep8222 yep. Have been lol..

[@2002ZRX1200R]

@@elmasloco6538 170/150 is the go to tune for hybrids for their preferred 960ish velocity. Lighter Nsa's prefer faster. The jsb 44's and heavier are stable below 930.

[@tracyr5594]

Lot of power. That’s like 79 ft/lbs

[@paullogan8329]

my brand new 177 maverick has inconsistent fps using 16gr jsb monster. it has factory settings. the speed is 941 964 951 973 945 952 what is wrong with it?

[@2002ZRX1200R]

Sounds like you bought a "maverick" lol. I hate mine. Compared to my other FX guns, the maverick is junk.

[@chrisford9045]

@@2002ZRX1200R nothing stopping you from fixing it

[@2002ZRX1200R]

@@chrisford9045 not even fx could fix it. They gave up after 3 weeks of working in it and sent it back with a different hammer spring and wished me luck. My .177 wildcat mkIII is the same way. Sent it to them, they kept it a month, worked on it for 2 weeks, put a heavier hammer in it and sent it back with the same note saying they can't figure out why consistency and accuracy sucked and blamed it on the barrel and valve, wished me luck. I have given up on FX, I ordered 4 Airmaks rifles (1 Caiman X .22, 2 x Katran CB's, 1 Krait L) and all of them showed up functioning perfectly and more accurate. I'm so impressed with them, I ordered a standard katran and a Katran L.

[@chrisford9045]

@@2002ZRX1200R There has to be something causing the problem. FX just didn't find the problem

[@2002ZRX1200R]

@@chrisford9045 sounds like such great QC and reliability for the price, right? Lol.

[@dalehenighan]

Hi is valve stop housing same on sub 12 as fac (high power) ??

[@wide2thebuzz]

My 600mm .30 won’t go over 880 with the exact same tune, when the gun was new it was 970-990 no problem, ever since the cocking rod grub screws let go it’s pretty much been a $2000 paper weight, very disappointing

[@n2shooter]

You got a 3 year warranty, so can you return it to be repaired?

[@wide2thebuzz]

@@n2shooter I did, it went to FX Usa and they discovered a faulty hammer spring shuttle and an incorrect hammer weight, repaired under warranty, upgraded to 700mm barrel and it shoots lights out

[@franciscocarvalho2424]

🤩🤩🤩🤩🤩🏅🏅🏅

[@seyhmusaltunsoz3675]

MEVRİK YES 👏👏👏👏👍

[@alancnc]

My dream is to get a fx panthera, here in my country (Brazil) it costs the price of a car, without conditions, help me to get one. 0:07

[@uzairahmadahmad7680]

twist rate of .22 sniper barrel 700mm?

[@crypto_creep8222]

Supreme liner is 1/16 and the Supreme heavy is 1/17 i belive

[@wernerrobb3095]

It is actually 1/24 for the standard barrel and 1/18 for the heavy slug liner. I havs both barrels.

[@yukyuk1817]

How much

[@iboylegends5682]

Mantap , idaman

[@fernandoviana2958]

LIKE Friends $$$$

[@harrymavin1376]

Fx crown grs stock

[@jamesbowskill362]

It would help the presentation if Ernest could speak clearly & not garble his words.

[@harrymavin1376]

Fx crown grs stock