FZ6 S2 throttle bodies tuned PT2

[@lmaobam24]

Thought I would add the according to the service manual, cylinder #2 is used as your reference point. Not cylinder #1

[@toshtwentythree195]

I stand corrected...thankyou sir

[@neilhamill318]

Haynes , Services and Repair Manual for Yamaha FZ 6 Fazer 04 To 08. Is saying to use number one.

[@DaveDaverson]

Just here for anyone who is looking how to do this. Dont blindly set them all to number 1. Set them all to the vacuum level stated in the haynes manual 👍

[@EllenDegenerate-o5b]

No1 cylinder

[@doolay1988]

Great video, thanks for sharing mate 👍

[@TingBiker]

Nicely put over Tosh, thanks for sharing. RSMF

[@petergoddard1960]

Nicely covered and explained, as ever buddy. Course it's easier with a single carb! :-)

[@toshtwentythree195]

Your not kidding, Thats mate

[@trevorwynkoop8591]

There's no synchronizing to be done on a single carb

[@petergoddard1960]

Trevor Wynkoop Yes Trevor, I know. It was my little joke :-)

[@itsjayke]

Just make sure you use a good cable tie on the tank! I've had one break on me before, not doing this but turns out they were cheap ones!

[@wuxianku]

great video my fz6 need to sync too

[@jbrowne5560]

Damn that sounds like some bad gas or something - valves?

[@joedanero5360]

Every 4k miles or 6k kilometers per service manual.

[@ozgurakman10]

would I set the air vacuum with carbtune? I googled it every fz6 user read ~20 cm hg after sync process. Mine was 18 and I set all of them between 20-21 cm hg. I know I shouldn't change the first cyl's air screw but bike was really bad milage. thank you.

[@toshtwentythree195]

+Özgür Akman your more than welcome

[@TAKIDANI]

Thanks Tosh , did it fix the vibrations ?

[@toshtwentythree195]

+TAKIDANI most of them but not all...It was an improvement

[@ozgurakman10]

Why carbtune has lags when revving?

[@ridersonthestorm6304]

+Özgür Akman üstadım bu senkron ayarımı oluyor şimdi ? pahalı birşeymidir bu carbtune zımbırtısı ? alim bende canım sıkıldıkça ayar yaparım :)

[@ozgurakman10]

+Sertac Kerman al tabi ki, videodaki gibi yapabilirsin sadece bu kadar uzun süre rölantide çalıştırıp fazla ısıtma. normal seyir ısısında olmalı

[@Xtiankurt]

In your carbtune has installed the restricters for connecting on the fz6 ?

[@toshtwentythree195]

+Xtiankurt no restrictions needed for the fz6