G+3 Building design | importing floor plan from CAD to Staad Pro | 30X50 floor plan | online course

[@ashishkumarsingh3043]

Sir you are far much better than my university professors

[@civilengineeringbyshravan9596]

Thank You ashishkumar

[@RB-nz9nt]

this i what i like.. fast and straight to the point!

[@mohammedbilal8547]

IT WAS VERY CLEAR .....VRY GOOD VIDEO

[@civilengineeringbyshravan9596]

Thank you 😊

[@a.aroicikiaamalrajamalraj9]

Very good explanation and experience. Thank you.

[@gajananeh8469]

Sir I learned from online but you explained very well 👍

[@ashokanand8924]

Thank you....very nice Sir

[@muhammadnizamsheikh5153]

Good work..one day u get lot of view keep working like this ,I hope in future u provide this type of video

[@civilengineeringbyshravan9596]

Thank you for u r support brother definitely I will make interesting topics like this video 💪🏻

[@cricyard3602]

kzbin.info/www/bejne/qYizkqh4aa6sp5Y

[@florindomartins299]

excellent tutor.

[@civilengineeringbyshravan9596]

Glad you think so!

[@elavarasanraj1098]

Thank u dear friend. Very useful 💪👍😘

[@civilengineeringbyshravan9596]

Thank you 😊

[@letminthanghaokip368]

Sir u r amazing..thank u

[@civilengineeringbyshravan9596]

Most welcome

[@SirsenduRoy]

Sir, I've send you floor plan DWG file. Plz show how to import this on cad by center line method and concrete design. And this video is awesome and very helpful for me Sir.

[@cricyard3602]

kzbin.info/www/bejne/qYizkqh4aa6sp5Y

[@nitindadhich8737]

Great work and thanks sir 👍

[@civilengineeringbyshravan9596]

💪🏻💪🏻💪🏻

[@sonukumar-bp4wb]

Sir please tell me different between plate curser or surface palte curser one are using for slab and other for lift .

[@civilengineeringbyshravan9596]

In plate section ka we are providing reinforcement steel bars while in case of surface sections we will take mesh for the reinforcement in order to resist vibration load or wind load

[@abdulkadirhassanahmed956]

Well taught %% Thank you sir

[@akashsuryavanshi2734]

Wow this is awesome man. U r simply great.

[@civilengineeringbyshravan9596]

Thanks

[@hummaidzafar2666]

Amazingly done man

[@civilengineeringbyshravan9596]

Thank You

[@SunilPatel-nk3pg]

Great sir

[@civilengineeringbyshravan9596]

Thank you 😊

[@s.bharathkumar6330]

Good wrk bro and tq 💥💪👍

[@civilengineeringbyshravan9596]

Thank you 😊

[@bangarukishore]

Nice Presentation

[@Somepeacefulllifemoment]

very useful video sir

[@md.mahfuzurrahmanrehan1904]

I am confuse about you mark the line c/c but your column size is different and column position also different. how can you make the c/c line? plz help this confusion. thanks.

[@civilengineeringbyshravan9596]

Please watch another video about it in playlist

[@ErNikhilKu]

Lift Outer Wall Will be R.C.C, not through Brickwork?

[@civilengineeringbyshravan9596]

Lift outer wall may construct with Brick or RCC

[@yakhoobkhan7598]

Sir, How can we design eccentric footings in staad pro.Can you please post the video on that.Much respect for you as I’ve learnt lot with your videos.

[@shanborlanglaloo4462]

what about Static or Dynamic analysis for Buildings in High Seismic zones? Can you please post videos of design using these two methods.?

[@issacsamuel8004]

Sir u didn't add the wall loads. is that neglectbale or u forgot

[@senthatamil5535]

Brother when did priod of X&Z value applies in sesmic.plse reply

[@ErNikhilKu]

Center line Diagram Column ke center to center se le jana hai, ya property ke outer se?

[@siddharthkamble2439]

Sir why surface plate is not drawn on all the four sides

[@civilengineeringbyshravan9596]

I can take all the four sides

[@manaschourasia9834]

what reports does the clint have to submit ?

[@civilengineeringbyshravan9596]

Check in staad output file

[@NanheTaareTV]

Sir, Please Make a Video How to draw Center line because i am trying it but unable to do... The Cad File You Provided Didn't Contain Center Line Diagram.

[@mohammedjassim1338]

Ua too good bro

[@civilengineeringbyshravan9596]

Thank you 😊

[@ErNikhilKu]

Where is Dead load i.e. self weight of Internal 5" and outer 9" wall?

[@civilengineeringbyshravan9596]

Please watch other videos regarding self weight of walls

[@durgaprasadncclimited7062]

When I was import autocad to staad pro , the centre line drwng is very small and not visible,, any key to zoom in screen

[@kartikjkdesignbuild1548]

Sir please make a video on how to design under ground and overhead water tank in sap 2000

[@civilengineeringbyshravan9596]

Ok sure I will make it

[@kartikjkdesignbuild1548]

@@civilengineeringbyshravan9596 thank you sir

[@rockstarak1706]

What about 158 warnings, you cannot pass this project until you get zero warning

[@er.rajatkumarsingh5611]

Sir completed report bhi bana batye aur print report me kya kya kare print

[@thulasideva4273]

After concrete design I'm getting warning as no bar available for stirrups what can I do

[@civilengineeringbyshravan9596]

No yar please follow this video properly

[@siddharthkamble2439]

Sir why rcc design is not done in this video is that not required

[@civilengineeringbyshravan9596]

I will make it by Sunday 👍🏻

[@veeraiahchillimunthala9607]

Sir while import .....cad drawing DXF to stad drawing ... It shows like blank page.... Please tell how to resolve this issue..please

[@aaron2897_]

can you send staad pro file?

[@civilengineeringbyshravan9596]

Sorry currently not available this file with me

[@barshanghosh1995]

In 19:34 , when I am doing this .. all beam are not selecting around x and z direction..

[@civilengineeringbyshravan9596]

Other wise u can select them by front view also 👍🏻

[@barshanghosh1995]

Thank you sir.. 😊😊

[@sonukumar-bp4wb]

You are putting the value for load and deflection calculation. Is it the value used for all building or change as per condition. I have difficulty in puting the value of load and deflection.

[@civilengineeringbyshravan9596]

Deflection value will be depends upon loading conditions

[@sammaiahgolla5493]

Super

[@civilengineeringbyshravan9596]

Thank you 😊

[@Rajsinghvlog77]

Sir, I have celander shape design how can I convert it to flat/straight line artwork with or without dimensions

[@cricyard3602]

kzbin.info/www/bejne/qYizkqh4aa6sp5Y

[@mohdafroz3813]

you are assigning same property and load for all beams.......for example beams of toilet,balcony, whose size is 4.5"........

[@dadaryan7]

fotings are over lapped each other how to rectify that problem

[@mdafzaliqubal4140]

how you calculate c.c for bays length

[@Sam-to5wt]

Sir, why didn't you considered outer column ? You have created cantilever beam but however you could have joined with column (outer)

[@rahullahri1743]

How be will interpret the saatpro result and manual results plz suggest manual simples calculation method

[@civilengineerkhokan2521]

Nice

[@zohebimran]

What about Plinth beam and its design????

[@tasneemraza4216]

Plz prepare final structural drawing for real work

[@civilengineeringbyshravan9596]

Definitely 👍🏻

[@knowledgehub2828]

Have you got real structure drawing tutorials after completing analyze in stadd pro? If you got do tell. Me

[@er.umarkhan]

Please make a separate video on loads and definitions..! That would be helpful.. Thank you 😇 also teach how to print the final analyse sheet

[@lekhyakandukuru7372]

Can u plz share centerline diagram of this drawing

[@civilengineeringbyshravan9596]

Not available with me right now am really sorry yar

[@lekhyakandukuru7372]

@@civilengineeringbyshravan9596 sir centre line diagram is importing to staad pro software can u tell the reasons

[@harshalmore4437]

Hello Sir Can you tell me Why this error is coming " If any floor diaphragm is present in the model Wind Load definition " and how to solve this error

[@teiie]

hii bro in staad pro can we analyse a load bearing structure

[@atulgupta2552]

Good

[@syedaltafmulla9168]

Sir please Plan for G+3 floor 3 bhk with 4 person lift in first second and third floor and in ground floor 1 bhk in size of 30/40 site

[@arif7848]

Doesn’t The walls in the lift area above footing there should be a beam above which wall is to be constructed???

[@ameenafarheen9327]

sir can u please make a video on how to apply loads using Is 875 part 2 pease sir it will help us ☺

[@civilengineeringbyshravan9596]

Do u need load combinations or loads ?

[@kamalsahidaini576]

The main columns rebars For three story plus building either Commercial or Residential the minimum size of bars are 16mm in Diameters above. Please review it perfectly Thanks

[@shaik229]

Sir, design the eccentrical footing and combine footing in design... Sir, in all drawing u r not shown the plinth beam design.... sir please explain the slab details of reinforcement...thank you sir

[@civilengineeringbyshravan9596]

It is recommended to provide two bars with minimum diameter of 12mm at the bottom of the beam. Similarly, two bars with minimum diameter of 10mm shall be provided at the top of the plinth beam. Reinforcement bars should be protected by 25mm concrete cover for plinth beams

[@mohammedaadil1409]

When i go into post-processing menu I am not able to see deflection due to load can u tell me why? or i have to press some key to see this

[@civilengineeringbyshravan9596]

U need to scroll circle in the mouse in order to see deflection

[@mohammedaadil1409]

@@civilengineeringbyshravan9596 got it when i use ctrl key and scroll together then it shows me deflection

[@civilengineeringbyshravan9596]

Yes 👍🏻

[@cricyard3602]

kzbin.info/www/bejne/qYizkqh4aa6sp5Y

[@ganeshtupkepatil2681]

Where is lift wall reinforcement results????

[@civilengineeringbyshravan9596]

Check it in output file

[@pranayvankar3490]

Sir which software is best E TABS OR STAAD PRO

[@ighome9568]

Bro please upload video on staad rcdc tutorials

[@barshanghosh1995]

In 7:13 , when I am trying this it's show two diagram of same things.. what can I do?

[@civilengineeringbyshravan9596]

Can u send me screen shot to my mail

[@barshanghosh1995]

Sir you told that you make separate video on center line drawing for stadd file.. when you upload this?

[@thulasideva4273]

How can I get the detailing of slabs staircase and shearwall

[@surojit_ghosh]

If you use latest STAAD.Pro CONNECT Edition, using integrated Advanced Concrete Design mode (basic module is free), you cab perform slab, shear wall and stair design and get the reinforcement detailing in both tabular format and also you can generate detail drawing file.

[@soumenmishra8055]

Sir, I am unable to generate seismic definitions. It shows "creation Failed". Please help me sir how to fix this problem.

[@shalinibhooma7611]

Plz share center line plan videos in autocad

[@GaganKumar-go1ig]

Didn't get how u made stairs??

[@SHADABANSARI-bo8zv]

make a video to use staad pro aotput data for detailing work

[@priyankjoshi1021]

Sir if you don't mind please share me your Staad model as I followed you still I'm having 3 errors.

[@civilengineeringbyshravan9596]

Am really sorry yar I did this model past but I don’t have that files

[@nagukunja3949]

Respected sir brick wall load how to consider sir

[@cricyard3602]

kzbin.info/www/bejne/qYizkqh4aa6sp5Y

[@mohamedismail104]

How you can copy first floor to the second and third floor when you have different rooms Sir is it ok🤔🤔🤔?

[@mohamedismail104]

I mean the second floor has too rooms when you compare to the other floors Sir

[@dheerendra003]

how can i model diagrid structures in staad

[@harshanagasaimanyam9294]

Sir,What about the warnings? Can we neglect those or we have to rectify the warnings ? Thank you for the video sir....

[@cricyard3602]

kzbin.info/www/bejne/qYizkqh4aa6sp5Y

[@harshalmore9318]

How to select all plate with staircase?

[@civilengineeringbyshravan9596]

With the help of plate selection option we can select plates

[@مدونةنقشحناء]

Please could you design building according to BS 8110 standard with all important data and properties

[@chandrashekaracharymaheshw7954]

are you are from hyderabad

[@civilengineeringbyshravan9596]

Yes

[@chandrashekaracharymaheshw7954]

@@civilengineeringbyshravan9596 do you run any institute if yes can you share details

[@brettyantony9221]

Can you please give me this plan cad file...I need a plan for my project to do staad analysis

[@civilengineeringbyshravan9596]

Ok text me u r mail ID

[@oyetundesaheed3912]

Me too sir, [e-mail]

[@simarpreetsaluja8320]

Sir can you please share this floor plan. as i need to make in autocad for structural irregularities

[@simarpreetsaluja8320]

My Id [e-mail]. Sir please share

[@maulikraval9097]

Sir why we used fe 600000 sir

[@civilengineeringbyshravan9596]

It is the grade of Steel we need to take the grade as per availability 👍🏻

[@lekhyakandukuru7372]

sir how to draw centerline diagram for this plan

[@kunalpatra1504]

kzbin.info/www/bejne/l6qbpIGbjq-niZo See the video and learn it how to draw a centre line drawing or layout plan...

[@pratikshadalvi973]

Can you please give me centre line plan?

[@more_developer009]

😍😍😍

[@kothamythili]

Centre line diagram link can u give us

[@brettyantony9221]

Hello pls reply, when iam importing it shows sharing violation...why?

[@cricyard3602]

kzbin.info/www/bejne/qYizkqh4aa6sp5Y

[@s.mbaqarmehdi732]

hello there, I am a rookie I don't know much about the AUTOCAD(though I have a authorized certificate from AUTODESK way back in 2017), if you can show exactly how to a CL diag in AUTOCAD it would be really helpful. Regards.

[@s.mbaqarmehdi732]

hello, I am having trouble in placing the CL for the columns, plz make a video to solve my concern.

[@subhapriyan1864]

How to draw centre line diagram of the building?

[@mukulgoswamicivilengineer.1288]

Pls make a video for detailed design using rcdc, for the same project

[@civilengineeringbyshravan9596]

Am trying to make a videos on it but it will take some time Brother but trust me I will explain surely 👍🏻💪🏻

[@ErNikhilKu]

Zone of Jharkhand?

[@civilengineeringbyshravan9596]

some districts are comes under Zone 3 and Some are under Zone 4

[@ErNikhilKu]

@@civilengineeringbyshravan9596 east singhbhum or jamshedpur

[@ShahidAkthar-j1x]

Hello sir my name is shahid from Karnataka. Sir why do you ignore the warnings it's also important sir.

[@adhirkumarkarmakar9715]

Where is the wall load on beams

[@sandhiyag4379]

Sir can you upload autocad file for this

[@g.sinstitution42]

Bro do u have pdf file of the Project, if there plz send no bro

[@p.indhirani9740]

You consumed all the respective word (respective)

[@syedsarfaraz8047]

Ur column position is not according to the plan you shown in the beginning And all columns are not at every junction Please do according to the plan Thank you

[@saleempasha6965]

Bhai warnings is to much....why are you not reduce the warnings

[@civilengineeringbyshravan9596]

U can reduce the warnings by increasing the size of columns, beams and slabs

[@SunilPatel-nk3pg]

Sir design building in stadd connect version

[@cricyard3602]

kzbin.info/www/bejne/qYizkqh4aa6sp5Y

[@prakashrsanganal2594]

Bro I want staad pro software